When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well it has been forever but now that I have settled into my new house I have started the tear down of the car I was going to try and get a sedan but I'm just keeping my balt.
Thanks man it has been crazy month 1/2 finally I can start working in the car again . So for now I'm going to do a boost leak test to see why my zfr won't boost past 20 psi also i checked my dp yesterday and my cat looks good nothing is loose and i found the piece thats making noise and vibrating
You will get there. I quit working on my cobalt for the short term and am working on my sons old Saab. Over next winter though it will get the parts I have stocked up including the zfr.
Yeah need to order new gaskets first to remove the turbo apparently it's still leaking a tiny bit of coolant it has a new gasket so not sure why it's leaking. Should be pretty easy to remove once the transmission is out of the car
Well I haven't gotten very far on the car transmission wise but I finally completed my boost leak tester and i did a boost leak test, I had a pretty big leak on the lower cp @ the tb connection. got that fixed and tightened, I did notice where the maf relocate plate goes it has little bubbles coming out it's not alot, not sure how to get that to seal up perfectly tho any ideas? I did tighten the bolts and it did help a bit.
Now I'm going to put the car back together and test my boost levels and see if that sealed it, Maybe complete my tuning once that's done I can start the swap since I won't be able to tune until the new clutch is broken in and that might take a a few weeks to do
I'm going with the aem 30-3352, the thing is getting enough space to add anything to it lol its behind the turbo no way to get to it thru the top and from behind it's difficult enough just tighten the damn banjo bolt. My plan will be to take the turbo off inspect the threads then put it back on,
I will try logging a bit today just to make sure that I got rid of all my boost leaks once I know it's all good then I'll start tearing her apart again to install the f40 now that I have all the equipment I will be needing.
Yes I do lol the car will be apart almost completely.
Looking here it seems I have leaks all over the place lol, well found another boost leak, it's next to the map sensor in the cp for some reason it has a hole at that's where everything is escaping from
It's hard to tell but I do have air coming out of it so I will say yes, and I have no clue i guess it was blocked with something when I got it from zzp
Tell me about it they were all in the lower cp I haven't messed with it since I installed it but yeah kinda silly tbh. That's the main reason I haven't done anything to the car
Moderator
04-11-2017, 08:04 AM
but I finally completed my boost leak tester and i did a boost leak test, I had a pretty big leak on the lower cp @ the tb connection. got that fixed and tightened, I did notice where the maf relocate plate goes it has little bubbles coming out it's not alot, not sure how to get that to seal up perfectly tho any ideas? I did tighten the bolts and it did help a bit.
about to order my meth kit as well
