2.0L LNF Performance Tech 260hp and 260 lb-ft of torque Turbocharged tuner version.

Kmo43 2016

Old 03-05-2016, 11:37 PM
  #26  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by Snail_SS
Haha if you move here you can do all the mexico runs you want
Is that a challenge??

Haha I already do a ton of Mexico runs. This year will prob be the record
Old 03-06-2016, 01:00 AM
  #27  
Senior Member
 
LNFwagonSS's Avatar
 
Join Date: 06-05-12
Location: Omaha
Posts: 700
Received 24 Likes on 21 Posts
I would love to see this setup on a beast mode tune and 3.82s
Old 03-06-2016, 03:00 AM
  #28  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by LNFwagonSS
I would love to see this setup on a beast mode tune and 3.82s
I have 4.05s but will be sharing not beast mode but a good tune very soon! Just did my first log 2nd is absolutely useless I need my NT01s back on!! It hit 29psi on only 45% WGDC and flowed pretty well. So far I am happy it didn't like to idle but trims were off there so that's understandable I work tomorrow but have Monday free so if I don't get arrested I may be able to get my **** together to do a vid but no promises
Old 03-06-2016, 08:01 AM
  #29  
Senior Member
iTrader: (3)
 
63 Nova SS's Avatar
 
Join Date: 06-12-12
Location: Indiana
Posts: 5,485
Received 316 Likes on 296 Posts
Originally Posted by LNFwagonSS
I would love to see this setup on a beast mode tune and 3.82s
Probably wouldn't last long on 3.82, or at least 3rd gear wouldn't.
Old 03-06-2016, 08:09 AM
  #30  
Moderator
Platinum Member
Moderator
iTrader: (3)
 
Snail_SS's Avatar
 
Join Date: 04-18-14
Location: El Paso, TX
Posts: 16,465
Received 603 Likes on 561 Posts
Originally Posted by KMO43
Is that a challenge??

Haha I already do a ton of Mexico runs. This year will prob be the record
Haha I mean REAL mexico runs
Old 03-06-2016, 09:41 AM
  #31  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by 63 Nova SS
Probably wouldn't last long on 3.82, or at least 3rd gear wouldn't.
Ya true that's why we have a spare and are looking at another

Originally Posted by Snail_SS
Haha I mean REAL mexico runs
The only one I know in Texas is you.... so are you calling me out??
Old 03-06-2016, 09:44 AM
  #32  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
I have to see more to be sure but vs last year I had a lot of boost drop off which is good because now I have the flow to keep up with the 71
Old 03-06-2016, 09:46 AM
  #33  
Moderator
Platinum Member
Moderator
iTrader: (3)
 
Snail_SS's Avatar
 
Join Date: 04-18-14
Location: El Paso, TX
Posts: 16,465
Received 603 Likes on 561 Posts
Originally Posted by KMO43
Ya true that's why we have a spare and are looking at another



The only one I know in Texas is you.... so are you calling me out??
Bring it!! I'll take ya with my knocking engine
Old 03-06-2016, 10:25 AM
  #34  
Senior Member
iTrader: (3)
 
63 Nova SS's Avatar
 
Join Date: 06-12-12
Location: Indiana
Posts: 5,485
Received 316 Likes on 296 Posts
You could always just sell the 2 f-35's and just move forward with an f-40. If you only straight line race you should get power to both wheels on a launch, corners no. It will be more durable over time I would think.
Old 03-06-2016, 10:26 AM
  #35  
Senior Member
iTrader: (3)
 
63 Nova SS's Avatar
 
Join Date: 06-12-12
Location: Indiana
Posts: 5,485
Received 316 Likes on 296 Posts
Originally Posted by Snail_SS
Bring it!! I'll take ya with my knocking engine
Knocking engine?
Old 03-06-2016, 10:57 AM
  #36  
Moderator
Platinum Member
Moderator
iTrader: (3)
 
Snail_SS's Avatar
 
Join Date: 04-18-14
Location: El Paso, TX
Posts: 16,465
Received 603 Likes on 561 Posts
Originally Posted by 63 Nova SS
Knocking engine?
Yup I keep getting knock up top so we will have to decrease timing
Old 03-06-2016, 08:05 PM
  #37  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Car runs a bit rough down low but pulls super smooth. Only have done 1 log will get another tonight

Last edited by KMO43; 03-06-2016 at 08:33 PM.
Old 03-07-2016, 11:28 PM
  #38  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Did a log tonight looks like I have to switch over to meth from just washer fluid. It's a good feeling to be looking around for other cars to race!!
Old 03-07-2016, 11:59 PM
  #39  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
I ran out of room but did a 60 to 92 pull my time was 2.844 and Justin's is 2.822. So I'm only 0.022 slower on 94 and washer fluid not my meth vs his E47 and 257. So I'm very happy with it right now!!
Old 03-08-2016, 09:26 AM
  #40  
Moderator
Platinum Member
Moderator
iTrader: (3)
 
Snail_SS's Avatar
 
Join Date: 04-18-14
Location: El Paso, TX
Posts: 16,465
Received 603 Likes on 561 Posts
Nice man!! Your car is a beast
Old 03-08-2016, 09:56 AM
  #41  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by Snail_SS
Nice man!! Your car is a beast
I'm getting together with my buddy Kyle to fix my meth leak this weekend and also will be switching back to my 80% meth mix. Then I can do a real 60 to 100 and see if it's faster than last year on my dyno tune. Aiming for a 3.2 sec 60 to 100
Old 03-08-2016, 10:07 AM
  #42  
Moderator
Platinum Member
Moderator
iTrader: (3)
 
Snail_SS's Avatar
 
Join Date: 04-18-14
Location: El Paso, TX
Posts: 16,465
Received 603 Likes on 561 Posts
Damn that's fast lol
Old 03-08-2016, 11:53 AM
  #43  
Senior Member
iTrader: (4)
 
soundjunky's Avatar
 
Join Date: 05-26-09
Location: Calgary, Alberta
Posts: 13,585
Received 38 Likes on 30 Posts
I heard you start up last night, and momentarily forgot that you have stage 2 cams...
It was pretty great hearing your car desperately trying to find it's idle...

I wonder how much tamer stage 1 cams seem in comparison.
Old 03-08-2016, 04:29 PM
  #44  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by soundjunky
I heard you start up last night, and momentarily forgot that you have stage 2 cams...
It was pretty great hearing your car desperately trying to find it's idle...

I wonder how much tamer stage 1 cams seem in comparison.
I changed to an less aggressive set of cam tables see how they work tonight. But yea it isnt as smooth
Old 03-08-2016, 05:14 PM
  #45  
Senior Member
iTrader: (4)
 
soundjunky's Avatar
 
Join Date: 05-26-09
Location: Calgary, Alberta
Posts: 13,585
Received 38 Likes on 30 Posts
it had better not be as smooth - otherwise you wouldn't be running stage II's!!

at first it sounded like you were going to stall - then I recognized your car was trying to find an idle setting

I figured I'd stick with stage I's just for streetability... since it is my year round dd.
Old 03-08-2016, 06:30 PM
  #46  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by soundjunky
it had better not be as smooth - otherwise you wouldn't be running stage II's!!

at first it sounded like you were going to stall - then I recognized your car was trying to find an idle setting

I figured I'd stick with stage I's just for streetability... since it is my year round dd.
I'll find out soon but with the less aggressive cam tables it should be better
Old 03-08-2016, 08:00 PM
  #47  
Junior Member
 
T-fog's Avatar
 
Join Date: 12-18-13
Location: Courtice
Posts: 423
Received 14 Likes on 14 Posts
I have been really busy with work, But i'm here and i'm in for results lol

Made me a little depressed to see this since I don't know if my car is coming out this year. bummer

But I can always rely on your threads for excitement lol
Old 03-08-2016, 09:48 PM
  #48  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Originally Posted by T-fog
I have been really busy with work, But i'm here and i'm in for results lol

Made me a little depressed to see this since I don't know if my car is coming out this year. bummer

But I can always rely on your threads for excitement lol
Sorry to hear that. I've been driving my car for the last 6 months without working cam phasers so that killed the fun but not having it in the summer would suck.

I just got all of Jon's GoPro parts together so I'm planning on doing a vid here very soon just have to mix my meth up and do 1 log for proper trims first
Old 03-08-2016, 09:53 PM
  #49  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Also the shop I dynoed at closed down but I can still get onto that dyno so my buddy with a Ford diesel and I are probably gonna hit the rollers. We were talking about betting who makes more hp but he quickly backed out. I just hope they don't convince me to put the total ******* tune in it!
Old 03-09-2016, 04:16 AM
  #50  
Senior Member
Thread Starter
 
KMO43's Avatar
 
Join Date: 01-21-12
Location: Calgary
Posts: 6,819
Received 84 Likes on 73 Posts
Just threw the R compounds back on!! They are needed

Thread Tools
Search this Thread
Quick Reply: Kmo43 2016



All times are GMT -4. The time now is 05:48 AM.