98 240sx S14 SR20det Build
#1
Senior Member
Thread Starter
98 240sx S14 SR20det Build
Hey guys I thought I'd post this so you could check it out. I'm building my brother's 98 240 that we have put a sr20 in. It's fully bolted catless DP, intercooler, custom stainless piping, apexi 3in exhaust, upgraded coilpacks, tubular exhaust manifold, crower cam gears, springs and cams, CP pistons, eagle rods, rocker arm stoppers and a microtech stand alone.
We picked up a Garrett GT2871r I think it's a little bit small for my tastes but I bought it for him and got a killer deal
Engine pics
We're gonna do some Candy Red paint on the valvecover and a balancer is in the plans as well
I'm looking to throw it in one of these weekends coming up here soon but I need to port my head and finish the LSJ gtx3076r swap as well so I'm kinda busy
We picked up a Garrett GT2871r I think it's a little bit small for my tastes but I bought it for him and got a killer deal
Engine pics
We're gonna do some Candy Red paint on the valvecover and a balancer is in the plans as well
I'm looking to throw it in one of these weekends coming up here soon but I need to port my head and finish the LSJ gtx3076r swap as well so I'm kinda busy
#3
Senior Member
Thread Starter
#4
Senior Member
iTrader: (2)
98 240sx S14 SR20det Build
Originally Posted by KMO43
Ya the car is really fun bumpy but fun. It sat for years and we took it out he bagged it pretty good and we broke 2 pistons
I forgot we are gonna run 555cc injectors but we have 800cc as well for when we wanna play!
I forgot we are gonna run 555cc injectors but we have 800cc as well for when we wanna play!
#6
Senior Member
Thread Starter
#7
Senior Member
Thread Starter
#9
Senior Member
Thread Starter
#11
Senior Member
Thread Starter
#12
Senior Member
Thread Starter
#13
Senior Member
Thread Starter
#15
Senior Member
Thread Starter
#16
Senior Member
Thread Starter
#17
Senior Member
Thread Starter
Gonna have to grab some turbo lines since we are swapping from stock t25 to a gt2871r and may need some custom pipes fabbed cause swapped from S13 Sr to a S14 Sr. If the used turbo is blown we're gonna throw a 76mm wheel it her
#19
Senior Member
Thread Starter
#20
Senior Member
iTrader: (2)
Me n my buddy are getting his 240 running at school. He just got it in there but his sprayed oil and coolant everywhere when he started it and let it idle. Idk if he had the right feed lines or what but he had oil underneath them. Also gotta drain the gas I think, it's been sitting for a year and it bogged out and died when he tried starting it after like 8 months of sitting. Changing fluids and checking all the lines once we get a lift at school. There's been construction going on in our work bays so we sat through book work and then worked on it outside. We're using the cheap version of the turbo Kevin's got going on this. The Isis 3871.
#21
Senior Member
Thread Starter
The ricer version
#23
Senior Member
Thread Starter
#25
Senior Member
Thread Starter