New engine bay goodies! *56K probably not*
Thread Starter
Senior Member
Joined: 12-12-05
Posts: 5,456
Likes: 0
From: Moosomin, Saskatchewan
New engine bay goodies! *56K probably not*
So, i had ordered some stuff from MRZ Performance, GM, and 24 Designs earlier in the year, and had them sent home. So now that i am home, i put them on!
Stainless fuel rail cover, spark plug cover, fuse box cover, strut tower caps, and door sills from MRZ Performance.
GM Stage II badges from 24 Designs.
SS Underhood blanket from GM Parts.
Tomorrow, i paint my rims! woo hoo!
PICS! Because this thread is worthless without them!
Engine Bay
Engine Bay and hoodliner (flash)
Engine Bay and hoodliner (no flash)
Side door Stage badges
Passenger side door sills
Trunk Stage badges
Stainless fuel rail cover, spark plug cover, fuse box cover, strut tower caps, and door sills from MRZ Performance.
GM Stage II badges from 24 Designs.
SS Underhood blanket from GM Parts.
Tomorrow, i paint my rims! woo hoo!
PICS! Because this thread is worthless without them!
Engine Bay
Engine Bay and hoodliner (flash)
Engine Bay and hoodliner (no flash)
Side door Stage badges
Passenger side door sills
Trunk Stage badges
Thread Starter
Senior Member
Joined: 12-12-05
Posts: 5,456
Likes: 0
From: Moosomin, Saskatchewan
Thanks! A lot of people like them, some don't. They are really bright when they light up though, and the inner taillights working is the best!
Thanks Rob! I really wish i could, but i'll be starting work around the beginning of june, and don't know if i can get the time off for it. I'm really hoping though!
Thanks Rob! I really wish i could, but i'll be starting work around the beginning of june, and don't know if i can get the time off for it. I'm really hoping though!
Senior Member
Joined: 12-30-06
Posts: 3,214
Likes: 0
From: Red Deer, Alberta
Thread Starter
Senior Member
Joined: 12-12-05
Posts: 5,456
Likes: 0
From: Moosomin, Saskatchewan
Well, you get some tinfoil and some duct tape, and a black ski mask... 
Actually, they were purchased from MGWilly off ebay. $265 CDN, and they have different colours and styles. I also have the LED CHMSL as well.
And Rob, i'll be visiting AB in the next month and a half or so, so you can make it up then! lol Then you can see it in person, not just my noisy Caprice!
Actually, they were purchased from MGWilly off ebay. $265 CDN, and they have different colours and styles. I also have the LED CHMSL as well.
And Rob, i'll be visiting AB in the next month and a half or so, so you can make it up then! lol Then you can see it in person, not just my noisy Caprice!
Senior Member
Joined: 12-30-06
Posts: 3,214
Likes: 0
From: Red Deer, Alberta
Well, you get some tinfoil and some duct tape, and a black ski mask...
Actually, they were purchased from MGWilly off ebay. $265 CDN, and they have different colours and styles. I also have the LED CHMSL as well.
And Rob, i'll be visiting AB in the next month and a half or so, so you can make it up then! lol Then you can see it in person, not just my noisy Caprice!
Actually, they were purchased from MGWilly off ebay. $265 CDN, and they have different colours and styles. I also have the LED CHMSL as well.
And Rob, i'll be visiting AB in the next month and a half or so, so you can make it up then! lol Then you can see it in person, not just my noisy Caprice!
although that caprice was pretty badass
Rad Shroud?
Thread Starter
Senior Member
Joined: 12-12-05
Posts: 5,456
Likes: 0
From: Moosomin, Saskatchewan
Haha, the aluminum rad shroud isn't actually aluminum. Its the stock plastic, silver dyed. It had to be cut like that so my chrome grills could go in though. Otherwise normally it tapers down into the stock grill. Some Duplicolour Vinyl and Carpet Dye: $8
The rest of the MRZ stuff came in at their website prices ($40 - $45 ea, so $200 before door sills), the door sills were $110, because they are "custom" from MRZ. The Stage Badges cost $55 before shipping from 24 Designs, and the hoodliner cost $104 from GM Parts.
The rest of the MRZ stuff came in at their website prices ($40 - $45 ea, so $200 before door sills), the door sills were $110, because they are "custom" from MRZ. The Stage Badges cost $55 before shipping from 24 Designs, and the hoodliner cost $104 from GM Parts.
Last edited by TheCaptain; Apr 1, 2008 at 11:08 AM. Reason: prices
Senior Member
Joined: 05-26-05
Posts: 6,375
Likes: 0
From: Pittsburgh, PA
Senior Member
Joined: 12-20-06
Posts: 2,379
Likes: 0
From: Calgary, AB Canada
Haha, the aluminum rad shroud isn't actually aluminum. Its the stock plastic, silver dyed. It had to be cut like that so my chrome grills could go in though. Otherwise normally it tapers down into the stock grill. Some Duplicolour Vinyl and Carpet Dye: $8
The rest of the MRZ stuff came in at their website prices ($40 - $45 ea, so $200 before door sills), the door sills were $110, because they are "custom" from MRZ. The Stage Badges cost $55 before shipping from 24 Designs, and the hoodliner cost $104 from GM Parts.
The rest of the MRZ stuff came in at their website prices ($40 - $45 ea, so $200 before door sills), the door sills were $110, because they are "custom" from MRZ. The Stage Badges cost $55 before shipping from 24 Designs, and the hoodliner cost $104 from GM Parts.
Yeah. I have the same MRZ dress up peices and the hood liner. Was kind of hoping they had that shroud as a new piece. Oh well one can dream.
cheers