You in the Galleria area of Houston and want to come pick up a kit? Give me a call at 832-428-3669 names Pat, just remember to say you're from CobaltSS.net :)

Feel free to order online!
3bspec.com (http://shop.3bspecialties.com)

Remember to put under special instructions that Patrick was your sales representative 8)

If you want to order through our online store, use the coupon code: cobaltss for the price of $130 shipped.

cell: 832-428-3669 names Pat
e-mail: sales@3bspec.com


Single Xenon HID Kits $130 shipped overnight
Fog Light HID Kits $130 shipped overnight
Bi-Xenon HID Kits $270 shipped overnight
D2S or D2R Bulbs $60 shipped overnight for a pair


One of the best Digital HID Kits on the market! The Bi-Xenon are TRUE Bi-Xenon Kits, look at the close up's of the duel beam kits. As with all of our kits, they are PLUG AND PLAY and come with relays already installed. Thats right, our kit comes with a relay harness. Don't be fooled by the other brands that don't have these. There are very few cars that can run without a relay harness and not burn out your factory connections. The only hassle you have is finding out where you want to mount the ballast. All of our kits are waterproof and vibration resistance. The pictures speak for themselves. As with all our kits, we stand behind them with a 1 YEAR NO HASSLE WARRANTY.

Every Single Xenon kit comes with:
2 Xenon bulbs
2 HID Ballast
Plug and Play Wiring Harness
Installation Guide
Mounting Hardware
1 YEAR NO HASSLE WARRANTY

Every Bi-Xenon kit comes with:
2 Dual beam Xenon bulbs
4 HID Ballasts
Plug and Play Wiring Harness
Mounting Hardware
1 YEAR NO HASSLE WARRANTY

Available Bulb Sizes: H1, H3, H4-Low, H4 Bi-xenon, H7, H8, H9, H11, H13, 9003, 9004, 9005, 9006, 9007, D2S / D2R

You can buy colors from 4,300k, 6,000k, 8,000k, 10,000k, 12,000k. Custom colors are $20 extra and are as follows; blue, yellow, purple. We can do other colors but these are the most common.

Now there is not a huge light output difference between 4300k and 12000k. To illustrate my point, here is a comparison picture of the two on the same car. 12000k left - 4300k right

12000k vs 4300k against a wall
http://www.3bspecialties.com/customercars/compare4kvs12k/compare1.jpg

12000k vs 4300k showing output
http://www.3bspecialties.com/products/lighting/hid/compare/4kvs12k.jpg

So in the end it comes down to what color you are looking for or like the most. All the Kelvin ratings are clickable to see our customer cars that have them installed.
4300k = Crystal White
http://www.3bspecialties.com/customercars/4300k/civic03.jpg

6000k = Crystal Blue
http://www.3bspecialties.com/customercars/yellow/integra01.jpg

8000k = Blue
http://www.3bspecialties.com/customercars/8000k/scion03.jpg

10000k = Deeper Blue with a hint of Purple
http://www.3bspecialties.com/customercars/10000k/scion02.jpg

12000k = Violet
http://www.3bspecialties.com/customercars/12000k/civic01.jpg

Custom Colors (added $20 charge and a 9-13 business day wait. there are other colors also, but these are the ones I have pictures of. These are not available for D2S/D2R or Bi-xenon bulbs)

Also, our Custom Colored bulbs start out as 4300k bulbs and then the gases inside are altered to give the desired color.

Here is a comparison between 4300k and a Custom Color Purple. Also this does not affect the life span of the bulb.
http://www.3bspecialties.com/products/lighting/hid/compare/4kvscc.jpg

3000k = Tinted Yellow
http://www.3bspecialties.com/customercars/3000k/scion05.jpg
http://www.3bspecialties.com/customercars/3000k/scion03.jpg

Custom Color Yellow = Golden Bar Yellow
http://www.3bspecialties.com/customercars/yellow/scion03.jpg
http://www.3bspecialties.com/customercars/yellow/scion04.jpg

Custom Color Blue = Deep Blue
http://www.3bspecialties.com/customercars/blue/ram01.jpg
http://www.3bspecialties.com/customercars/blue/ram02.jpg

Custom Color Pink = Pink
http://www.3bspecialties.com/customercars/pink/integra01.jpg

Custom Color Purple = Deep Purple
http://www.3bspecialties.com/customercars/purple/integra01.jpg http://www.3bspecialties.com/customercars/purple/output.jpg

Custom Color Green = Green
http://www.3bspecialties.com/customercars/green/scion03.jpg
http://www.3bspecialties.com/customercars/green/scion04.jpg

*$130 shipped to anywhere in the United States overnight. Shipping to Canada is an added $10 fee. Overnight shipping does not include Custom Colors.

Also remember if you want LEDs we offer those also and they are a lot cheaper when you buy them with an HID kit since they come with free shipping then!

Is this $130 price include slim ballasts or just the regular?

The price is $130 shipped with regular ballast. Slim ballast are only really needed for motorcycles when space is at a premium.

I highly recommend these kits. I know Patrick(Operatic) personally and its an absolute pleasure to do business with. I have two of his HID kits in my car and they are quality.

Wow awesome deal! + 1...once i get my projectors ill be placing a order !!

some in red would be cool, but i dont see any

Thanks Nick!

If you get those Gen3 Projectors like 06BlackSC has the cut off is freakin' amazing!

Also, we can get them in red, we have just never had a customer take a picture of it once installed.

do you have fogs too??

Why yes we do! Factory Cobalt fogs are H11's. And the cut off is amazing!

Up for some HIDs with free LEDs!!!!

up for some goodies!

Bumpin it up!

wow very good price, ill place an order when i get projectors

i will be placing an order soon. i have been wanted HIDs for a while. i have the first gen projectors

the fogs sound nice too bad i have no ss/tc to put them in yet

wow very good price, ill place an order when i get projectors
Best thing to do partner, better to get the projectors first so you order the right bulbs.

i will be placing an order soon. i have been wanted HIDs for a while. i have the first gen projectors
If memory serves me right they use the H1 bulbs for the low beam, but you might want to double check to make sure.

the fogs sound nice too bad i have no ss/tc to put them in yet
The OEM fogs on the Cobalt have an extremely clean cut off line and are very wide especially with the HIDs.

just paid for a custom bluw h1 hid kit with reg ballasts

and i put my name in the paypal account for the led license plate lights

With custom colors there is a 9-13 business day turn around time, but it goes by a lot quicker than you'd imagine!

im confused with hid's i need to kno what kind i need that have high and low beams

With custom colors there is a 9-13 business day turn around time, but it goes by a lot quicker than you'd imagine!

i can wait, i just hope its not longer than 13 buisness days.

Subscribed

im confused with hid's i need to kno what kind i need that have high and low beams
The single xenon kit gives you a xenon low and a halogen high beam ($130 shipped)
The bi-xenon kit gives you a xenon low and high beam ($270 shipped)

Most people opt for the single xenon kit as their low beam is so bright that they no longer use their high beams except to flash people.

i can wait, i just hope its not longer than 13 buisness days.
It goes by real quick partner

Ok, so I just installed these projectors:
http://cgi.ebay.com/ebaymotors/05-08-CHEVY-COBALT-CCFL-HALO-PROJECTOR-HEADLIGHTS-06-07_W0QQcmdZViewItemQQcategoryZ33710QQihZ003QQitemZ 130223027480QQrdZ1QQsspagenameZWDVW
and now I am going to order the Single Xenon kit but I need to know whether to order the 35W or 55W. I have already checked the bulb in them and it says its an 55W H7. Does this mean I need to order the 55W ones?

35w will do just fine

Cool, thanks.
Now my question is since I will be ordering the bulbs as H7 and the stock housing is a different size are they still plug and play?

Cool, thanks.
Now my question is since I will be ordering the bulbs as H7 and the stock housing is a different size are they still plug and play?
What you do is order the bulb size, H7 and the harness as a 9007 which is for your factory connection so everything is still plug and play. No added price for mixing and matching like that so you know.

What you do is order the bulb size, H7 and the harness as a 9007 which is for your factory connection so everything is still plug and play. No added price for mixing and matching like that so you know.

Great, Thanks for the help. I just ordered and put in the special instructions that the bulb is H7 and the harness is 9007.

You'll be seein' your kit and free LEDs before you know it partner!

We goofed on sending out LEDs with the HID kits people are ordering. We are going through the old sales and if you used the CobaltSS coupon or supplied your CobaltSS usename you will be seeing your free LED license plate bulb soon if you did not get one originally!

great deal jus bought two kits!!..for me an my buddy that has also been through yall for business!!

You'll be seein' your kits before you know it partner :)

You'll be seein' your kits before you know it partner :)

awesome cant wait..!! all i needed was ballasts cuz mine r goin bad i think but i couldnt pass the deal up...thanks!!!

No problem partner :)

Just bought a kit from you. Thanks.

I'm going to buy 2 kits when i get back home!!

Got them today. Kit looks great. I'll hook'm up when my Gen 2's get here.

ill try and order my h11 fogs tomm

I'm going to buy 2 kits when i get back home!!
Whenever you get back, hit us up and we'll take care of ya!

Got them today. Kit looks great. I'll hook'm up when my Gen 2's get here.
Oh you're gonna love em partner :)

ill try and order my h11 fogs tomm
Whenever you're ready, just hit us up and we'll take care of ya :)

H1 bulbs in the 3rd gen projectors right?

H1 bulbs in the 3rd gen projectors right?
Yes, that is correct

whats the difference between the ballaster? the 30w and 5ow

Quick run down:
-50w ballast increase the price of the kit by $15
-50w ballast are brighter than 35w balllast
-50w ballast drop the kevlin color by 1000k. So if you have an 8000k bulb, it'll look like a 7000k kit.
-50w ballast last just as long as 35w ballast

just ordered mine right now :D

As long as it was not a custom color, you'll be seeing em shortly :)

is this the setup i need for 2nd gen projectors? Just wanna double check before placing order:)

http://img133.imageshack.us/img133/7735/79761886bw4.gif

Yes it is :)

Hey Pat I just called you regarding the custom color Yellow fogs, but i just need the bulbs not the whole ballast. Can you please PM me a price and delivery time. Thanks

I wanna set of those Custom Deep Purple ones, but I can't afford them right now =[

how much for h1 halo lights

what if i need just the ballast?

Hey Pat I just called you regarding the custom color Yellow fogs, but i just need the bulbs not the whole ballast. Can you please PM me a price and delivery time. Thanks
Sent you that PM :)

I wanna set of those Custom Deep Purple ones, but I can't afford them right now =[
Our deal will be going on for a long time, so whenever you're ready just hit us up, we'll take care of ya :cool:

how much for h1 halo lights
For a pair of H1 bulbs, it is $60 shipped.

what if i need just the ballast?
We sell just ballast(s) by themselves. It is $40 shipped for one ballast. It comes with just the connection that attaches the ballast to the bulb. So you need the connection that attaches the ballast to the power source, be it a relay harness or a PnP harness that draws power directly from your OEM connection.

I guess I'll just ask here since I can't get a response from your website...

I have another brand (eBay) HID kit that uses the stock wiring to connect to the power harness for the ballasts (Hella brand I believe). Will your $15 Relay harness work to connect the ballasts properly directly to a power source? Also what does the kit include? I'm assuming a relay, connectors, and wiring harness? Any way I could get a picture to make sure my ballast connectors will hook up? Thanks...

i already have some HIDs but one of my bulbs burnt out or something cuz it doesnt stay on, only flickers when i turn them on and then shuts off so i was wondering if i can just order the bulbs even if the ballasts or the hid kit is another brand? if so what size or what bulb is it that i need to get thanx alot

can any one help?

so.. the single bean xenon its just one bulb and the Bi-xenon are two bulbs short and bright light?

i already have some HIDs but one of my bulbs burnt out or something cuz it doesnt stay on, only flickers when i turn them on and then shuts off so i was wondering if i can just order the bulbs even if the ballasts or the hid kit is another brand? if so what size or what bulb is it that i need to get thanx alot

If the bulb is flickering it seems like the ballast is bad or there is an electrical problem. If the bulb was burnt out it most likely would not turn on at all. Double check the wiring, and if that doesn't solve it, but a new ballast...

thanx for the info well i checked the wiring and its fine so i connected everything and now the bulb doesnt even flicker so i took it out and theres a crack on the little blue line thing one the bulb so now what? you think it was the bulb the whole time or i have to replace the ballast Thanx again for the help

thanx for the info well i checked the wiring and its fine so i connected everything and now the bulb doesnt even flicker so i took it out and theres a crack on the little blue line thing one the bulb so now what? you think it was the bulb the whole time or i have to replace the ballast Thanx again for the help

It sounds like a crack on the return lead for the bulb. In that case, it is probably only a problem with the bulb. Replace it and see how it works out.

hmm yeah ill try that but any way my original question was if i could buy this brand of bulb and still be able to connect it to the ballast i believe its halo brand or something thanx again

30w vs 50w.

im assuming the 50w is brighter

Sorry everyone for the slow replies!!!! :(

Hey Pat I just called you regarding the custom color Yellow fogs, but i just need the bulbs not the whole ballast. Can you please PM me a price and delivery time. Thanks
For just the bulbs it is $80 shipped and I sent you that PM

how much for h1 halo lights
For just H1 HID bulbs it is $60 shipped for a pair. But you need the rest of an HID kit (ballast and connectors) to make everything work.

what if i need just the ballast?
For just 1 ballast, it is $40 shipped

I guess I'll just ask here since I can't get a response from your website...

I have another brand (eBay) HID kit that uses the stock wiring to connect to the power harness for the ballasts (Hella brand I believe). Will your $15 Relay harness work to connect the ballasts properly directly to a power source? Also what does the kit include? I'm assuming a relay, connectors, and wiring harness? Any way I could get a picture to make sure my ballast connectors will hook up? Thanks...

As long as your ballast are similar to ours then yes it will work with your kit. Most every kit on the market today uses the same type of connectors so you should be good to go.
http://home.comcast.net/~patcourt/hid/ballast.jpg

But our relay harness comes with 2 connections for each ballast and 1 connector for your OEM connection, 1 ground wire and 1 power wire with inline fuse and of course the relay :)

And here is a little diagram of the harness. This a 9006 harness, the only difference is the OEM connection.
http://i141.photobucket.com/albums/r52/webmancorvette/DSC06180.jpg

i already have some HIDs but one of my bulbs burnt out or something cuz it doesnt stay on, only flickers when i turn them on and then shuts off so i was wondering if i can just order the bulbs even if the ballasts or the hid kit is another brand? if so what size or what bulb is it that i need to get thanx alot
A good way to check to see if it is a bulb or ballast is to make a note of which side is bad. Passenger or drivers side, then from there move the ballast around, passenger or drivers side and vise versa. See if the problem follows the ballast. If it does it is the ballast, if it does not it is the bulb.

Also for your car, you either use a 9007 if you have factory headlamps or an H1 or H7 if you have aftermarket projectors depending on what type you have.

so.. the single bean xenon its just one bulb and the Bi-xenon are two bulbs short and bright light?
The single xenon kit has a xenon low beam and a halogen high beam.

The bi-xenon kit has a xenon low and high. Most people are very satisfied with the single xenon kit as they barely ever use there high beams afterwards.

30w vs 50w.

im assuming the 50w is brighter

Quick run down of the differences between 35w and 50w ballast.
-50w ballast are brighter than 35w ballast
-50w ballast drop a bulbs kevlin color by 1000k. So an 8000k bulb will look like a 7000k bulb with 50w ballast.
-50w ballast make the price go up by $15
-50w ballast last just as long as 35w ballast and does not shorten the life of any of the components.

check your pm's.

well. installed them. didn't use the harness, just did the plug n play deal. low beams are brighter than stock, not by much though. no blue hue. the high beams however rock ass. the usual hid blue hue.

i may hook up the harness this week and see if it changes the output of the low beams. the low beams don't warm up like the high beams do. am i missing something here? limited output due to not having harness?

run down.
4300k kit. 50w ballast. 9007's. nothing out of the ordinary.

well. installed them. didn't use the harness, just did the plug n play deal. low beams are brighter than stock, not by much though. no blue hue. the high beams however rock ass. the usual hid blue hue.

i may hook up the harness this week and see if it changes the output of the low beams. the low beams don't warm up like the high beams do. am i missing something here? limited output due to not having harness?

run down.
4300k kit. 50w ballast. 9007's. nothing out of the ordinary.

We could have pinned it the wrong way where as the halogen bulb is your low beam and your xenon is your high beam. That would explain why your highs beams have a blue hue and have a warm up time.

pinned wrong on both sides?!?!

do i, or don't i need the harness that was in the box as well, or can i leave it plug and play?

bueller?

bueller?

bueller?

pinned wrong on both sides?!?!

do i, or don't i need the harness that was in the box as well, or can i leave it plug and play?

bueller?

bueller?

bueller?

Ya, we probably just looked at the wrong diagram when we put em into the socket. Most people use the harness, but you can opt out and just use the Plug and Play set up if you wish.

I would definitely recommend using the relay harness. The relay harness is still plug and play except you just have to connect it to the batter terminal and to a ground which is super easy... Other than that it is just as easy if not easier than using the plug and play. I was using the plug and play with my eBay kit and I bought one of 3BSpec's relay harnesses. It wired in perfectly with my kit and the install was really easy. It now looks professional and I don't have to worry about overloading my stock wiring. It is a nice harness. Just plug it in and zip tie it to the factory wiring in the front of the engine. You can't even see it once installed...

Up for some HIDs!!!

PMd everyone back

up for some HIDizzles !

up for some HIDizzles !

let me ask you something if i just get the 130 dollar ones do they have high beams

Yup, they have the xenon low beam and a halogen high beam.

let me ask you something if i just get the 130 dollar ones do they have high beams

you're better off buying the single hid kit without the "high" beam.


what would the upgrade cost of going to dual hid bulbs, low and high beam?

After buying a single xenon kit it is an added $140 to upgrade. You get new bulbs, a bi-xenon harness and new ballast

may have to do that, because frankly the 194 bulb in the housing now is more of a city light than anything close to a high beam

is the upgrade on the site?

Just call us at 832-428-2431 or e-mail or PM us, we don't normally do it, but we can make an exception :)

i just ordered hid's for my fogs and im wondering when they will ship out also if i wanted to get the bi-xenon kit is there a way to get them in 6000k with the 50w harness or would it be the same thing if i just bought 2 single xenon kit thanks

i just ordered hid's for my fogs and im wondering when they will ship out also if i wanted to get the bi-xenon kit is there a way to get them in 6000k with the 50w harness or would it be the same thing if i just bought 2 single xenon kit thanks
Sent you a PM about when you'll get your fogs. As for the bi-xenon kit, you can do the whole kit in 50w if you want.

But quick question as it makes a difference: Do you have factory headlamps or aftermarket projectors?

Sent you a PM about when you'll get your fogs. As for the bi-xenon kit, you can do the whole kit in 50w if you want.

But quick question as it makes a difference: Do you have factory headlamps or aftermarket projectors?

i will be getting projectors not sure which ones though

At that point you really only need a single xenon kit as your high and low beams are on separate bulbs now.

up for some HIDs!!

i installed you kit tonight and there seems to be a problem for some reason one bulb is brighter than the other one do you know what could cause that problem i ordered your 50w 600k kit h11 i believe for the fogs

Sent you a PM partner :)

why did you cancel the paypal invoice on my order...

Probably a misunderstanding. Sent you a PM though!

your website says you will need a higher number if you have projector lights instead of the stock housing. i like the look of the 8,000k so which bulbs would i need to achieve that look in my projector lights?

your website says you will need a higher number if you have projector lights instead of the stock housing. i like the look of the 8,000k so which bulbs would i need to achieve that look in my projector lights?

Best bet would be to go with the 10,000k to help get that same color in a projector housing at the lens.

i have after market projectors. what kind of bulbs do i need?

If you can show me a picture of your projectors I can tell you or you can pull the bulb out of the housing and it should say on the bottom of the bulb, if not you can match it up. It is either going to be an H7 or an H1 for the Cobalt.

http://www.3bspecialties.com/products/lighting/hid/bulbBase/H1.jpg
http://www.3bspecialties.com/products/lighting/hid/bulbBase/H7.jpg

up for some HIDizzles

how long dose this last is it limited b/c i just ordered new pillar and 3 gauge wich ran me a couple bills need like 4o more bucks to get these just need to know how long this is goin on

This offer is going to be going on for a long time partner, don't fret :)

how much for 50watt low/high bixenon?
I am sticking with stock housing
thanks

For a bi-xenon kit with 50w low and high, it would be $280 shipped.

Yup, they have the xenon low beam and a halogen high beam.

sorry i know this was posted awhile ago.. but do the halogen high beams have the same color as what u ordered? i was looking to buy 9007 8000k hid kit witch i heard was very blue and bright..

The halogen high beam is just a regular halogen bulb, so it will be a yellowish white color

Happy Thanksgiving everyone :) http://www.neartownvet.com/NewsGraphics/turkey.jpg

i just ordered mine. i'm excited!
6000K FTW!

You'll be seein' your HIDs shortly :)

hey operatic....im gonna order H7 custom yellow motorcycle kit soon..i was wonderin if the coupon code would work on them...and whut do u think bout the yellow

hey operatic....im gonna order H7 custom yellow motorcycle kit soon..i was wonderin if the coupon code would work on them...and whut do u think bout the yellow

Yup, the coupon code would still work if you buy a motorcycle kit from our site :) Also yellow on a yellow bike actually looks pretty good :)

Ok. I want to get the fog light conversion kits and the bi-xenon. Does the fog kit take care of both lights? What bulbs do i get? I was planning on getting halo headlights.

also too for my conversion kit, not to sound like a total idiot, but should i get twin halo led projectors, ccgl halo projectors, ordual led halo projectors? I just wanna know what would be best for the kit

Ok. I want to get the fog light conversion kits and the bi-xenon. Does the fog kit take care of both lights? What bulbs do i get? I was planning on getting halo headlights.

also too for my conversion kit, not to sound like a total idiot, but should i get twin halo led projectors, ccgl halo projectors, ordual led halo projectors? I just wanna know what would be best for the kit
Honestly the single xenon kit is just fine as the low beams will be so bright that you'll hardly ever use your high beams afterwards.

But if you have factory headlamps you'll use a 9007. If you have aftermarket projectors, you'll have either H1 or H7 bulbs.

You're fog lights will be an H11 kit so you know.

As for the aftermarket projectors, all of the Cobalt ones come with halo's and LEDs. I do not believe any of them are CCFL's though at the moment.

can i get red i dont want pink lol is it extra for coustom color

is there a discount if we buy the hid head lights and fogs together

is there a discount if we buy the hid head lights and fogs together

Just placed my order for The HID kit, along with the 3rd gen headlights kit!

can i get red i dont want pink lol is it extra for coustom color

is there a discount if we buy the hid head lights and fogs together

is there a discount if we buy the hid head lights and fogs together

Yup, red is an added $20. I PMd you also.

Just placed my order for The HID kit, along with the 3rd gen headlights kit!
You'll be seeing your order shortly :)

Bringing it up for some HIDs :)

up up up

Just ordered some 6k for my projectors, I put it in the notes but could you make sure that I get H1 bulbs and the relay and the connection is a 9007. Thanks!

It's actually easier to have it so you have the harness as an H1 connection as the projectors already have a 9007 connector on them.

<-Slightly confused, there's a few wires that I dont know what to do with in my HID kit.

How would it be easier using the H1 instead of the 9007? 9007 is what is on the car.

hey meng i just got my projectors.... and can i send u back my 9007 hid bulbs that i ordered a few months back to swap out for a h1 bulbs for my headlights? just throwing it out there ! cuz now i have 9007 bulbs sitting around

Got my 9007 harness today, it's actually easier to hook up with the 9007 than the H1 that the kit came with. Having issues getting the bulbs into the housing.....Looking for thread.

ordered my hid's yesterday.... shipped literally across the country in a day. very fast shipping, these guys mean business!

Bringing it up for some HIDs :)

HIDs installed earlier in the weekend, looks great after I got em aligned and stuff
http://cobaltss.net/gallery/files/1/3/3/7/8/img00009_20090613_1724.jpg

Very nice, I like the eyelid work there :)

Very nice, I like the eyelid work there :)

Thx! I picked up the paint at the O'rileys paint shop, its mixed to GM specs and is great to work with. I still gotta redo the clear though, the stuff they gave me turned out the way you see it. Maybe next weekend if the weather cooperates I'll get around to making it nice and shiny like the body is. Once that is done, the eyebrow should blend with the body very nicely.


Oh and a note to people having to modify their housings to get the bulbs to fit: Do it with the headlight apart so you dont get "glittery" crap all over the inside of the headlight. Also known as metal shavings.

Bringing it up for some HIDs :)

Probably gonna order these once I get the money. Quick question though, what does the DRL/ Warning module do. I have an 07 cobalt, so will I need this to keep my DRLs?

Just ordered mine. Waiting for shipping conformation...

SO im looking to purchase 10ks. im confused on what i need though. Do i need a bi-xenon for a stock housing for hi-low single bulb. what type of bulb would i need? how much would it run me? and what is the DRL module for?

PM'd everyone back.

quick question, how do the h1 bulbs work when we have projectors on our cobalts? is the h1 bulbs connector still going to connect to our 9007 plug ?

H1 bulb connects to the H1 adapter on the projector :)

up up up

Ordered a kit last night! My lights should be here Tuesday and i can't friggin wait for the kit to come in so I can put them in! So excited :)

hey can i get the H11 fog light plug and play kit custom purple for 130?
i cant find a purple anywhere else...
and what will the kit come with? im new to the HID game :D

^^^ I was thinking the same thing on the purple foggers...money is a little short right now though, so I'll have to check back in a month or two!

^^^ I was thinking the same thing on the purple foggers...money is a little short right now though, so I'll have to check back in a month or two!

^^^ thinking the same thing...but I might need to wait a month or two for the money to get right :-)

^^^ thinking the same thing...but I might need to wait a month or two for the money to get right :-)

i have the gen1 projectors that have the H1 bulbs. I know I need the H1 hid kit but i'm confused on if I need the 9007 relay harness or a H1 relay harness? also do you except paypal through your website?

i have the gen1 projectors that have the H1 bulbs. I know I need the H1 hid kit but i'm confused on if I need the 9007 relay harness or a H1 relay harness? also do you except paypal through your website?
IDK about the wiring for the 1st gens, but for the 3rd gens, I just ordered the plug and play harness under the h1 bulb section and it worked fine. I had to do a tiny amount of wiring, but nothing too major. It's not literal plug and play. Paypal is all that they take.

BTW, I just put my HIDs in, and they work great! Thank you 3bspec for such a great product at an affordable price!

i thought the site says they take credit cards to? i wanna get the realay harness casue i don't trust the pnp. Do you offer a single relay harness for motorcycles?

i thought the site says they take credit cards to? i wanna get the realay harness casue i don't trust the pnp. Do you offer a single relay harness for motorcycles?
You can pay with a credit card though paypal. There's an option on paypal's site when you go to pay to just put your credit card info in without creating/having an account. So the payments technically through paypal, but you don't need an account to pay.

i wouldn't even trust their relay harness.

how don't see where to enter the coupon code on the website during checkout?

how don't see where to enter the coupon code on the website during checkout?

The coupon code is entered after you enter your billing/shipping address.

up up up :)