Ok I just bought an H11 HID conversion kit for my foglights, I've already put HID's in my 2nd gen projector headlights so I'm kinda familiar with the installation. I just have one noob question... where the heck do I put the two little silver connectors that are just randomly there on the wires?

It was easy to figure it out with my projector headlights because the connectors just plugged into them, but this, I have no idea what to do with.

Here's a couple of pictures of what I'm talking about. CAN ANYONE HELP ME OUT or tell me where/what I do with the silver connector plugs?
http://cobaltss.net/gallery/files/1/3/6/1/1/dscn0684_1_thumb.jpg (http://www.cobaltss.net/gallery/showimage.php?i=36761&c=newimages)

http://cobaltss.net/gallery/files/1/3/6/1/1/dscn0683_1_thumb.jpg (http://www.cobaltss.net/gallery/showimage.php?i=36760&c=newimages)

i have hid in my fogs...from what i remember i cut off that rubber part couse you really dont need it as for the 2 connectors in the hid kit they should have sent u the plastic holders that plug into the stock hardness like how you hookd up the ones in your headlight if you dont have the plastic part then email them they left out 2 parts 2 the kit...hope i helpd you out

i have hid in my fogs...from what i remember i cut off that rubber part couse you really dont need it as for the 2 connectors in the hid kit they should have sent u the plastic holders that plug into the stock hardness like how you hookd up the ones in your headlight if you dont have the plastic part then email them they left out 2 parts 2 the kit...hope i helpd you out

I'm going to cut that rubber cup off. But There is nothing missing from the kit. I have the same kit for my headlights and they didn't come with these "plastic holders" you're talking about. Now I'm just confused.....

I'm going to cut that rubber cup off. But There is nothing missing from the kit. I have the same kit for my headlights and they didn't come with these "plastic holders" you're talking about. Now I'm just confused.....

lol ok recap when u did your headlights an on the stock hardness how theres the blue connecter that you had to disconnect? they should have sent u a set like that

lol ok recap when u did your headlights an on the stock hardness how theres the blue connecter that you had to disconnect? they should have sent u a set like that

This is what it looked like when i plugged them into my projector headlights, its not the same as the fog lights. Do you have a link or picture as to what you're talking about? That would help me out alot.

http://cobaltss.net/gallery/files/1/3/6/1/1/dscn0626_2_1_thumb.jpg (http://www.cobaltss.net/gallery/showimage.php?i=31902&c=newimages)

If the kit did not come with a relay harness. Those two metal pins go into your OEM plug. Match the black plug up with the ground wire and the red with the other wire. You just push the metal pins into the connector and wrap it up with electrical tape.

This is what it looked like when i plugged them into my projector headlights, its not the same as the fog lights. Do you have a link or picture as to what you're talking about? That would help me out alot.

http://cobaltss.net/gallery/files/1/3/6/1/1/dscn0626_2_1_thumb.jpg (http://www.cobaltss.net/gallery/showimage.php?i=31902&c=newimages)

wow ur like the 2 person without the true plug n play hid kit but ya im looking for a pic of any hardness 2 send u 2 show u the part your missing or well atless came in my kit that i used

If the kit did not come with a relay harness. Those two metal pins go into your OEM plug. Match the black plug up with the ground wire and the red with the other wire. You just push the metal pins into the connector and wrap it up with electrical tape.

It didn't come with a relay harness. Thanks for your help. ;)

No problem - If those HIDs fail on you, hit me up :D

No problem - If those HIDs fail on you, hit me up :D

I will 110%. I will be ordering some off of you soon enough. I want a different color temp for my headlights.

Oh ya, enjoy the HIDs regardless - one of the best mods ever!!!

Oh ya, enjoy the HIDs regardless - one of the best mods ever!!!

I will.. But you're sure that's what I do with those connectors? I mean, that's what you do when you don't have a relay harness?

one of the best mods ever!!!

agree if i do deside 2 go 2 projectors i will also b getting more hids for the hi/lo but i will need the slim ballast 2 hide...no more room under the hood for another set lol

I will.. But you're sure that's what I do with those connectors? I mean, that's what you do when you don't have a relay harness?
Without a doubt in my mind partner. They'll go in just like this.
http://img240.imageshack.us/img240/1470/dsc00405mo4.jpg

where did you get the fog hid kit?

Yup, thats exactly what you do with the wires. It has worked for me.

where did you get the fog hid kit?
He got his kit from eBay, but we are a vendor here on CobaltSS that also sells HID kits ;)

He got his kit from eBay, but we are a vendor here on CobaltSS that also sells HID kits ;)

even for fogs? looking for a plug and play hopefully

Sent you a PM

Sent you a PM

thx.

i just purchased a hid kit is there any modding needed to get the H1 bulbs to fit in the projector housings?

Nope, but so you know the bulb doesn't go in the way you think it would.