Well somone tried this not to long ago and i injoyed it, liked seeing what people hade done to their cars and what not around here in the maritimes.
in these posts people include whats been done to your car and a photo or 2

I ASK EVERYONE TO KEEP COMMENTS TO PMS just want this to be pics and info on the cars thanks.

I will start out:

Modifications:

Exterior:

Custom Painted Head Lights
LED Alteza Tails
10k HIDs
17" Tenzo-R Rims
BC2 Body kit
Tint 5%
Door Mouldings Removed
SS Badges

Interior:

SS Black on Black Leather Seats
Custom Fibreglass rear deck
EGT Gauge
AEM Wideband
Boost Gauge
Oil Press Gauge
Autometer 3 pod A-piller


Stereo:

Alpine 980 Head unit
Alpine Type R Mids and Tweets
Alpine Type R Cross over's
Alpine Type R 6x9's
2 Alpine Type R 12" subs
Alpine MF 450 Amp
2 Kenwood X10 amps
500k Compasider (Power Cap)
Street wires Distubition Block
Street Wires 4 Gauge Wire
Alpine Type R RCA wires

Performance:

GT2871R Turbo with internal waste gate
Vulcan Turbo Manifold
42.5LB/Hr Injectors
Turbo smart Boost controller
Evotion Intercooler
BOV
Wisco Pistons
Eagle H Beams
2.5 Pacesetter Cat back
FMU (fuel Management unit, no tune needed)

Handling:

Eibach 2.5" Sport line kit
DC Sports Strut Bar
Eibach Anti-Sway bars
Cobalt-Addiction 1" Traction Bars
Twin Bar, Lower Sub frame Bar
On Order (waiting on):
3 gauge a pillar pod
Turbocharged Badge

Future plans:

Carbon Fibre OEM hood
Carbon Fibre OEM Trunk Lid
Halo projectors
NOS Intercooler Spray
Meath kit
Tune
Floor Brace
Harness bar
Bwoody rear lower strut bar
4 wheel big brake disk brake conversion
coil over's
3" or bigger exhaust
LED third brake light
Lambo doors
Door poppers
Z3 fenders

Pics:

http://i181.photobucket.com/albums/x194/pykie_2007/bodykit005.jpg
http://i181.photobucket.com/albums/x194/pykie_2007/sideskirts002.jpg

**REMEMBER NO COMMENTS, ONLY IN PM'S**

2006 Cobalt SS/SC

Performance Mods:

1 Flux Capacitor

plus a few bolt ons

2006 Cobalt SS/SC:

Stock

its a FREAK!!!!!! who needs mods?

wass up with SS emblems on a base model :thumbsdow

2007 cobalt ss/sc

mods:
stage 2
injen cold air intake
ingalls engine damper
vibrant header and downpipe
painted brake calibers
front mesh grill
halo headlights
a few stickers

future:
carbon fiber hood
konig heatsink rims
vibrant catback exhuast
carbon fiber blade for wing
tint 25% in back 35% in front
2.9 inch pulley
60lbs injectors
customer tune
meth kit
struct tower brace

Exterior:
-Smoked taillights
-High rise wing
-RTX Arsenic 17" rims
-5% Tint on rear passenger and rear windows

Soon to come:
-Springs 2.0/2.5 drop

Stereo:
-Alpine CDA-9883 head unit
-Alpine Type R Subwoofer 12"
-Alpine MRP-M500 amplifier
-Bassworx box

Soon to come:
-Custom box

Performance:
-Pulled silencer/airbox mod.

Soon to come:
-Exhaust
-Cool air intake

Pics:
http://img515.imageshack.us/img515/5571/copyofimg3515dp0.jpg

http://img135.imageshack.us/img135/8245/img3498fe7.jpg

Exterior:
-Smoked taillights
-High rise wing
-RTX Arsenic 17" rims
-5% Tint on rear passenger and rear windows

Pics:
http://img515.imageshack.us/img515/5571/copyofimg3515dp0.jpg


I've seen you around sackville a few times..


06 Cobalt SS 2.4
Sunburst Orange

Exterior;
18x7.5 Enkei Evo 5 rims w/ 225/40r18 rubber
08 SS/TC front lower and upper grill
Full LED tail lights w/ LED 3rd brake light
Black headlights w/ PIAA Xtreme White headlights and fogs
Shorty Antenna 8"
Removed rear Chevy emblem, added 2.4 emblem.

Interior;
Tim Horton's coffee cup in cup holder (dyno proven 5+ extra hp) :P

Performance;
GMPP Intake
Removed intake silencer (resonator)

Handling;
PowerSlot Rotors w/ Hawk HPS pads (sitting on bedroom floor)

Old pics; will update with new ones once rims are on.

http://cobaltss.net/gallery/files/3/9/2/6/peggyscove2.jpg

http://cobaltss.net/gallery/files/3/9/2/6/grill2.jpg

http://cobaltss.net/gallery/files/3/9/2/6/rims2.jpg

I've seen you around sackville a few times..

hey yeah i think i was driving in front of you on sackville drive yesterday !

ahah well I got

60lb injectors
2.9 inch pulley
injen cold air intake
vibrant header/dp
gmpp performance exhaust
Ingalls Torque Dampner
HP tuned
C/A Heat Exchanger
First Gen Projectors will 6000K HIDS
Aeroforce Interceptor
AEM Wideband
Powerslot rotors with Hawks pads
2.5% tint in back
Shorty Antenna
SSC Lowering springs

need to install:
TB spacer
Devils Own Meth Kit
CF Hood
CF Trunk

2007 Sunburst Orange Metallic
Injen Intake
3rd Gen. Projectors with 6000k HID's
Sun air freshener
Nates 2.9 Pulley

Future:
GMPP Manifold
GMPP Performance Cat Back
Meth Injection
Maybe Injectors and a tune.

http://i337.photobucket.com/albums/n381/Mr_McCabe/1.jpg

http://i337.photobucket.com/albums/n381/Mr_McCabe/7.jpg

http://i337.photobucket.com/albums/n381/Mr_McCabe/8.jpg

http://i337.photobucket.com/albums/n381/Mr_McCabe/9.jpg

how do your stage 2 injectors lke that 2.9? lol

Its not techically on yet... will be tomorrow. From the research I've done, 2.9 is safe with the 42 lbs injectors. Lots of people have it from what I understand.

yah but the injectors go over 100% around 6000 rpm. I thought it was the way to go but I put 60lb injectors to be safe.

ya Zekdemos injectors are @ 110% with Stage 1 only...gm runs the stage kits super rich.....I ran a 2.8 pulley on my stage 2 for 1.5 years with zero issues, you will be fine with the 2.9. I havent seen any balts with stage 2 and 2.9 blow yet and there are tons out there with this setup.

i better not be the on that blows then lol. would be fun to see it happen though.

lol it would suck for sure. But then you would have to build it up.

hey yeah i think i was driving in front of you on sackville drive yesterday !

haha was that you waving at the intersection on cobequid earlier tonight? i wasn't paying attention and my fiance was like.. "why is that guy waving at us.. oh wait.. cobalt"

i assumed it was you, she said it was black with the "big" wing.

hahah yeah seen your car and i was like i wonder if he knows about this website, then i seen your window sticker so i threw a wave