It's been ages since we've actually posted up something new so here goes...

Anyone who's had our Polyurethane CABs know one thing: They're prone to fail. Polyurethane in any combination with the CABs doesn't work. This is something that's evident only over long term, (1 year or so, sometimes less)... Basically, this left a lot of ppl with a useless product and a sour taste in their mouth. Regardless, we offered free swaps to anyone who wanted a new pair, but ultimately that's pretty much in vane because they'll only get another year outta the new pair and be in the same boat again... So the only way out of this vicious cycle is switch back to stock or


>>>> Spherical Bushings, Solid, no P.U.


Anyone interested in such a product? We'll try to keep pricing the same as the existing bushings (http://www.jbodyperformance.com/new/PartDetails.php?partId=925&catId=925&catName=JP0925). Also, if you currently have our old bushings, we're going to offer a discount on these new ones, regardless if you have a receipt or not.

need some pictures

need some pictures

No pics of a product that doesnt exist... Just drumming up interest here.

This helps big time with wheel hop, correct?

This helps big time with wheel hop, correct?

yes, that is correct.

I'm interested

OK, I have the torque damper and it doesn't really do shit at the track. I refuse to get solid tranny mounts or engine mounts because I don't like the vibes at all, even after it's broken in. How much will this help with hop?Any idea?

subscribed.. Interested

Im very interested. I was actually gonna by those bushing from you guys but im glad i didnt now.

im interested, however for street use a spherical rod end must have a rubber dust boot on it. without a way to keep the grit out they will be binding up and worn out faster than the urethane CABs.

id love it if you offer a trade in. i still have a set of junk urethane ones from you that i took out about 6 months after they were installed.

Yea, I am most definitely interested in these....

Interested..

I'd be interested

... a spherical rod end must have a rubber dust boot on it....

Right, We'd have to over come this issue with the design itself. A sealed heim is the only thing that will work.

It seems as though there's a great deal of interest in a matter of one hour. I'll see what we can come up with in the next couple of days. (pricing, design and more information)

No pics of a product that doesnt exist... Just drumming up interest here.

yeah i'm talking like drafting pictures and computer ideas and what not. but i'll give you guys a little bit to come up with some haha

definetly interested in these if you can come up with a sealed unit as i do alot of driving.

what will be used for material?

Interested

Interested!

probably interested

bump for more interest

click...

VERY interested depending on the design and price.

Interested

Interested :twothumbs

Returning customer ! Vortex Header FTW

We're almost done a design. Basically its a outer aluminum shell with the custom spherical bearing inside. By the looks of it, we'll be able to make it a sealed unit, which should alleviate some issues as mentioned with grit, dust and sand. The unit itself will be corrosion resistant.

Please keep up updated! I would love to see some pics of the prototype as well.

any news?

Interested....

Any news?

There isn't any commitment from the public. We've shelved this for now.

I was interested in this product as many other ppl please explain what you mean when you say not enough commitment from the public?

I should rephrase, there's no PAYING commitment. We'd need to see a definite interest with money backing the idea.

well whenever you guys figure out a price ket me know cause I'll be the first to order a set.

very interested

I should rephrase, there's no PAYING commitment. We'd need to see a definite interest with money backing the idea.

Don't blame you guys... the LSJ crowd is a joke when it comes to commitment.
They'll always say "I'd buy it"... then when it comes down to money it's always "too pricey".
I guess that's what happens when the general demographic is kids. :lol:

Don't blame you guys... the LSJ crowd is a joke when it comes to commitment.
They'll always say "I'd buy it"... then when it comes down to money it's always "too pricey".
I guess that's what happens when the general demographic is kids. :lol:

TRUE, but i didn't see a price for these? only a promise for some inof, price and such but no follow up.

only a hundred bucks... nice

TRUE, but i didn't see a price for these? only a promise for some inof, price and such but no follow up.

read the first post....
http://www.jbodyperformance.com/new/PartDetails.php?partId=925&catId=925&catName=JP0925

only a hundred bucks... nice



read the first post....
http://www.jbodyperformance.com/new/PartDetails.php?partId=925&catId=925&catName=JP0925

those ones have the p.u. in them, I was talking about the solid metals one that they were talking about making but decided not too.

Don't blame you guys... the LSJ crowd is a joke when it comes to commitment.
They'll always say "I'd buy it"... then when it comes down to money it's always "too pricey".
I guess that's what happens when the general demographic is kids. :lol:

i dunno, your talking a $100-200 part here, it could go over well. everyone said the same about the tvs blower, when an atractive package was put together (like ott is doing) there is a huge interest, a bunch of people paid in full, a ton of others with deposits, and thats a $1700+ item. the biggest thing i find is people want a solid product that is proven before money is put down, and companies (not just jbp) want people with cash in hand to buy an untested product before they design it.

i dunno, your talking a $100-200 part here, it could go over well. everyone said the same about the tvs blower, when an atractive package was put together (like ott is doing) there is a huge interest, a bunch of people paid in full, a ton of others with deposits, and thats a $1700+ item. the biggest thing i find is people want a solid product that is proven before money is put down, and companies (not just jbp) want people with cash in hand to buy an untested product before they design it.

Same shit... different pile.
The TVS GB is not a good example. The people that got in on that are, for the most part, the more mature crowd around here. I'd safely say that most of them were planning to buy a TVS within the year anyways.

On the same note... to engineer and produce a $1700 blower, is not a large task by any means for a company like Harrop, who deals with this kind of work on a daily basis. Meanwhile, JBP is a small company with a small design team. To design and produce a part like these mounts wold be a gamble if no one would honestly buy it. JBP never asked people to buy a junk product... they asked if people would buy a fully tested product.... something that they have been known to do in the past (find me something that hasn't lived up to a decent standard, and don't fucking mention that header, cause it fits!).

if anyone is still looking for good C A bushings consult GM they have access to solid caputured.... VERY RIDGID! love them

This helps big time with wheel hop, correct?

no. they do not.

any updates, im sick of my pos bushings going out (both sides replaced by gm once) and their doing it again, i have cash and just want a good product... sick of them failing and want a one time fix

any updates, im sick of my pos bushings going out (both sides replaced by gm once) and their doing it again, i have cash and just want a good product... sick of them failing and want a one time fix

x2...ive had both sides done and i heard the left pop again today....shitty design....plz actually pursue this.