Took the car up to Modified by KC's dyno day today, first time i've dynod my car, i am pretty satisfied with the results :).

264whp and 232wtq was the most we saw.

for some reason the dyno sheet didnt get the 264 pull but i do got it on video and took a pic of the screen. here are a couple pics. sorry for the bad quallity :/, but i will try to get the video up tomorrow.

New video and sheet

Pic i took of the screen.

http://i110.photobucket.com/albums/n113/cobalttc05/IMAGE_008.jpg

This doesn't show the 264hp pull but the tq numbers should be right.

http://i110.photobucket.com/albums/n113/cobalttc05/IMAGE_009-1.jpg

Video :)
http://i110.photobucket.com/albums/n113/cobalttc05/th_dyno-1.jpg (http://s110.photobucket.com/albums/n113/cobalttc05/?action=view&current=dyno-1.flv)

better scanned pic of the sheet

http://i110.photobucket.com/albums/n113/cobalttc05/modified.jpg

what r your mods..............

What does a stock Cobalt SS register on that dyno? Any idea?

GM stage 2, 2.9" pulley, CAI, LS4 TB, ZZP header/ D Pipe, 3" mandrel bent cat back exhaust w/ magnaflow muffler, ingalls torque dampner, Area47's modified stage 2 tune, exedy hyper single. i beleive thats all that helped me.

What does a stock Cobalt SS register on that dyno? Any idea?

not sure but its a precise dyno.

nice travis..now save your money and buy LEFT 4 DEAD

lol will do mayne :twothumbs

wow ............was that a mustang dyno.....or a dyno jet............

nice #s...now post that vid! haha

i just recently got dynoed to........................and was amazed.

its a dyno jet. same one that Area, Revhigh, Exsoccer, Elite Cyborg, Batboy, Ralli( i beleive) etc. used

lol i'll get it up tomorrow if i can find the cable.

i have a feeling i will get the BS flag cause the different numbers :lol:

i just recently got dynoed to........................and was amazed.

what did you get out of her

i dyno'd last weekend

what did you put down

183 whp and 186 wtq...BUT that was on a dyno dynamics dyno with psykostevo there tuning he said it was low/off and im actually putting down 215whp with only cai and h/e so its ok i guess, lol its basically just my baseline runs b4 i get all my parts on and tuned

ok i got dynoed on a mustang dyno and i put down 288 whp..........and 255wtq

gm stg2 2.9,jbp vortex header,4in intake,3in catless dp,3in exhaust,ported throttle body,tune,and velocity stock............i couldnt believe it................ the guys at afe engineering couldnt believe it ......i made 18 whp and 18 wtq with there new intake coming out

WTF?!?!?!?! 4" intake???

thats nuts mang!

well its a 4in that goes to a 3

183 whp and 186 wtq...BUT that was on a dyno dynamics dyno with psykostevo there tuning he said it was low/off and im actually putting down 215whp with only cai and h/e so its ok i guess, lol its basically just my baseline runs b4 i get all my parts on and tuned

did he tune your car any?

i told u.................... it was crazy bro

did he tune your car any?

nope, still under "warranty" with the stock tune :) lol

lol oh wellllll, i'd do it ;)

well its a 4in that goes to a 3

i was gonna say, how the hell did they fit that thru the fender well and what did they do with the brake lines haha but i see if it goes back to a 3"

lol oh wellllll, i'd do it ;)

a completely stock '05 that he tuned that day put down 200hp(actually comes out to 235whp) and about 209wtq
that surprised even him lol...we had a stg2 w/a 2.9 that only put down 202hp haha

was the one with the 2.9 tuned as well? or running the stage 2 tuine

no, he was stg2 tune lol and really rich still

ah bummer :lol:. i'm not sure what Bryan did really but i beleive all he did was lean out my afr and work with the timing. was at a steady 11.8-12 across the rpm range.

yeah, even mine flat-lined on 10 after about 3600rpm

what was the 2.9 guys afr

it fits good in the brake line area just in the bumper its a 4 in but when its going back up through the frame it goes to a 3in

Nice numbers my friend :twothumbs

thank you sir :)

i recorded all 3 pulls, but for some reason one of them recorded over the other 2 :(

what was the 2.9 guys afr

i dont remember, but im pretty sure it either hit 10 or got really close still

that sucks! should of gotten it tuned :D, just saying!

is there anyother way to get video from your video camera onto your computer, other then the dv cable? or do i just have to go find one?

good numbers travis you still got 42's on there or did you put 60's in it. to get the video uploaded you could put your sd card in the computer because i lost my stupid cord too and thats how i have to upload pics to computer that way.

thanks mike, i have 42's but have the 60's at home. i tried that but the only thing that popped up was pictures :/

thanks mike, i have 42's but have the 60's at home. i tried that but the only thing that popped up was pictures :/
thats pretty good numbers with 42's man i need that tune i just sold my 2.9 again thats the 2nd or 3rd one i owned just never got around to getting injectors and somebody would need a pulley so i would help them out.:(

you have 42's right?? you can run the 2.9 and 42's and have Bryan fiddle with it a bit, i think all he did with mine was put the stage 2 map on it and then mess with the timing and afr. not sure, but you should give it a shot :)

i guess i'll buy another 2.9 pulley again and give ol' bryan a call did he fiddle with it at the dyno meet last weekend?

nope just dyno'd it, i was the last one there :D.

nice numbers man. Really good for an LSJ.

thank ya sir :). i'll have video as soon as the firewire cable i ordered comes in

video on original post

its a dyno jet. same one that Area, Revhigh, Exsoccer, Elite Cyborg, Batboy, Ralli( i beleive) etc. used

lol i'll get it up tomorrow if i can find the cable.

i have a feeling i will get the BS flag cause the different numbers :lol:



what did you get out of her

nope, I didn't use that dyno. I used a dynojet in Lincoln, NE.

ok i got dynoed on a mustang dyno and i put down 288 whp..........and 255wtq

gm stg2 2.9,jbp vortex header,4in intake,3in catless dp,3in exhaust,ported throttle body,tune,and velocity stock............i couldnt believe it................ the guys at afe engineering couldnt believe it ......i made 18 whp and 18 wtq with there new intake coming out

The dyno operator needs to be shot. Mustang dynos read artificially high if the car weight, Cd, and drum weight are put in improperly. A properly calibrated mustang dyno reads approx 10-13% lower than a dynojet. That would mean you are making 317-325 whp on a dynojet. No way in the world. Go to a different dyno like a dynojet and see what it makes. I am betting around 256 whp 228 wtrq.

nope, I didn't use that dyno. I used a dynojet in Lincoln, NE.

ahh i see i thought i read that you used that dyno my bad.

i ahve a 06 ss/sc i got it tuned and only put 232 whp..my mods front mount, 2.9 pulley, aem intake, 42 lb injectors, gmpp headers and exhaust... should my numbers be higher..please help also text me if you want 18016609135

its all bout the tune, i was tuned by one of the best around. only difference i had was a ls4 throttle body and 3" exhaust