Mark this thread as Unsold
For Sale JL Audio XR series speakers F&R
Thread Starter
Senior Member
Joined: 07-03-07
Posts: 1,966
Likes: 0
From: Upstate NY
JL Audio XR series speakers F&R
I have a full set of BNIB JL Audio XR series speakers for sale. I have the front components and rear coaxial speakers, model #'s XR650-cxi and XR650-csi. I did open the box to check them out but they have never been removed or installed in anything.
I do not want to split these, I'd like to sell them as a whole. However, money talks.
I'm asking $350 SHIPPED.
XR650-CXi Coaxials
Description: Evolution™ XR 6.50 in. / 165 mm Coaxials
1.0 in. / 25 mm Aluminum Dome Tweeter
Grilles Included
Woofers: Mineral-filled polypropylene cone body, 1.0 in. / 25 mm voice coil, low-profile/symmetrical-roll spider, butyl rubber surround.
Tweeters: 1.0 in. / 25 mm aluminum dome tweeter with rubber surround, neodymium magnet, ferrofluid cooled and damped. Adjustable tweeter angle.
Crossover Networks: 2-way network with 1st order low-pass circuit and 2nd order high pass circuit. Premium Mylar Capacitors and Air-Core inductors. 3-position adjustable tweeter output level. 3-position midrange presence control. Polyswitch™ tweeter protection.
Continuous Power Handling: 70 Watts
Rec. Power Range (per channel): 25 - 150 Watts
System Efficiency: 89.5 dB @ 1W/1m
System Nominal Impedance: 4 ohms
System Frequency Response: 48 Hz - 25 KHz ± 3 dB
XR650-CSi 2-Way Component Systems
Description: Evolution™ XR 6.50 in. / 165 mm 2-Way Component System:
6.50 in. / 165 mm Woofer; 1.0 in. 25 mm Aluminum Dome Tweeter
Grilles Included
Woofers: Mineral-filled polypropylene cone body, 1.0 in. / 25 mm voice coil, low-profile/ symmetrical-roll spider, butyl rubber surround.
Tweeters: 1.0 in. / 25 mm aluminum dome tweeter with soft, rubber suspension, neodymium magnet, ferrofluid cooled and damped. Variable mounting system with swivel / rotation capability.
Crossover Networks: 2-way network with 1st order low-pass and 2nd order high-pass circuit. Premium polypropylene film capacitors and air-core inductors. 5-position adjustable tweeter output level. 3-position midrange presence control. Polyswitch tweeter protection.
Continuous Power Handling: 70 Watts
Rec. Power Range (per channel): 25 - 150 Watts
System Efficiency: 89.5 dB @ 1W/1m
System Nominal Impedance: 4 ohms
System Frequency Response: 48 Hz - 25 KHz ± 3 dB
I do not want to split these, I'd like to sell them as a whole. However, money talks.
I'm asking $350 SHIPPED.
XR650-CXi Coaxials
Description: Evolution™ XR 6.50 in. / 165 mm Coaxials
1.0 in. / 25 mm Aluminum Dome Tweeter
Grilles Included
Woofers: Mineral-filled polypropylene cone body, 1.0 in. / 25 mm voice coil, low-profile/symmetrical-roll spider, butyl rubber surround.
Tweeters: 1.0 in. / 25 mm aluminum dome tweeter with rubber surround, neodymium magnet, ferrofluid cooled and damped. Adjustable tweeter angle.
Crossover Networks: 2-way network with 1st order low-pass circuit and 2nd order high pass circuit. Premium Mylar Capacitors and Air-Core inductors. 3-position adjustable tweeter output level. 3-position midrange presence control. Polyswitch™ tweeter protection.
Continuous Power Handling: 70 Watts
Rec. Power Range (per channel): 25 - 150 Watts
System Efficiency: 89.5 dB @ 1W/1m
System Nominal Impedance: 4 ohms
System Frequency Response: 48 Hz - 25 KHz ± 3 dB
XR650-CSi 2-Way Component Systems
Description: Evolution™ XR 6.50 in. / 165 mm 2-Way Component System:
6.50 in. / 165 mm Woofer; 1.0 in. 25 mm Aluminum Dome Tweeter
Grilles Included
Woofers: Mineral-filled polypropylene cone body, 1.0 in. / 25 mm voice coil, low-profile/ symmetrical-roll spider, butyl rubber surround.
Tweeters: 1.0 in. / 25 mm aluminum dome tweeter with soft, rubber suspension, neodymium magnet, ferrofluid cooled and damped. Variable mounting system with swivel / rotation capability.
Crossover Networks: 2-way network with 1st order low-pass and 2nd order high-pass circuit. Premium polypropylene film capacitors and air-core inductors. 5-position adjustable tweeter output level. 3-position midrange presence control. Polyswitch tweeter protection.
Continuous Power Handling: 70 Watts
Rec. Power Range (per channel): 25 - 150 Watts
System Efficiency: 89.5 dB @ 1W/1m
System Nominal Impedance: 4 ohms
System Frequency Response: 48 Hz - 25 KHz ± 3 dB
Thread
Thread Starter
Forum
Replies
Last Post
brickloaf
Electronics, Audio, and Video
19
Sep 25, 2015 09:10 PM