a while back i put an indianapolis colts logo on my back window. it's not a sticker, its one of those where its just a sheet of clear paper/rubberish **** and it sticks to the window with pressure. anyways, it wasn't holding right, so i pulled the sheet off of the rear window and...THE LOGO CAME OFF THE PAPER AND STUCK TO THE WINDOW. now i thought maybe windex could clean it off, but its like paint. the ****** won't come off. i even tried scraping it. i cant get it off. anyone know of a product that will take it off really easy? also, i want to get my windows tinted, but idk if they can tint with this thing painted on my window. do you think tinters have a product to get this off, or they would be able to?


it would suck if i couldnt tint because of this thing

 

The tint company should have a good cleaning solution and likely will not charge too much extra.

If it were me, I'd try Goo Gone and a razor blade.

 

heat it up and use a razor to scrape it off

 

Try a rag and some kerosene.

 

is it inside off the window or outside. let me know i can tell u

 

I know with any stickers or anything I removed from vehicles, brake cleaner works good. Just make sure you clean the surface you used the brake cleaner one well.

 

its inside...sorry! its a real pain in the ass, and i want to get this thing out haha

 

inside...





BUMP

 

are your windows already tinted????

if not take ammonia and a rag and hold it over the spot for a while and then scrape with a good razor blade.

 

not already tinted...ill give it a shot. thanks, if this fails more suggestions ideas would be helpful haha

 

lacquer thinner will work wonders to take anything off .. along with the idea of break fluid... ( be carefull with both they can ruien paint and almost anything elce if u dont clean them off.)

 

laquer thinner, goo gone, wd-40, heat it with any of the previous mentioned. + razor blade.

 

x2 on the laquer thinner, ive seen that stuff take off anything, if not try carb cleaner

 

awesome, thanks! ill give this a shot sometime this week when i'm not feeling too lazy haha

 

laserblue2006 said the answer but dont use a razor blade on the defrost lines.... if not tinted just spray the ammonia overr the sticker ,close the doors and windows then leave it close for abt 3 to 5 hrs open and it be almost off the window just clean it....

 

o yea forgot about the lines....but i guess in the back of my head i figured he would be smart enough not to...

 

yeah, i know that those are a big no-no

 

this is what happens when your a colts fan


haha jk

 

update did this work?

 

havent tried it yet...its been in the upper 80's and low 90's with high humidy this past week, typical indy august weather. i dont wanna be in my car when this hot, when i do it ill let ya know

 

Goo gone and a razor. The razor will NOT scratch the glass. comes right off.

 

i would agree with those who said to heat it up, and then a razor, thats always the way to go!

 

BUMP; UPDATE!


i finally got the damn thing off, i used finger nail polish remover, which is basically paint thinner according to my mom, so i said what the hell and did it. and, yep it worked. it was a bitch...i had to scrub pretty hard and then pull tiny pieces that didnt come off with scotch tape haha.

thanks for all the help

 

well at least you got it off!...haha...

 

yeah, no kidding...i gotta get some tints now