Here is a group purchase we thought about having when they first came out. We are willing to do it, if we see enough interest:

They are available in 4 stages. Also, they have an aluminum flywheel available.

FX100 is an Organic disc that will hold 70% over stock. Retails at $645.
FX200 is a Kevlar disc that will hold 70% over stock. Retails at $775.
FX300 is a Kevlar disc that will hold 100% over stock. Retails at $775.
FX400 is a Ceramic disc, available in 4 or 6 pucks, which will hold 168% over stock. Retails at $745.

These do include the Slave cylinder and throw out bearing.

Flywheel is a light weight aluminum, which retails at $475.

Everyday low pricing will be 5% under retail. However, here is what the group purchase would be:

The % off the website price would be as follows:

4+ Clutches would be 5% off the everyday low price
7+ Clutches would be 7% off the everyday low price
10+ Clutches would be 10% off the everyday low price

Every Flywheel counts as ½ a clutch on the above table. For example, 2 clutch and flywheel combos, would at 3 clutches to the above table.

Shipping is $25 per Clutch and $15 per Flywheel.

Anyone interested in doing a group purchase on clutch masters email Aaron@turbotechracing.com with the subject. "Group Buy Clutch Masters" Include what you are interested in, (what clutch and if a flywheel) also when you would be considering purchasing one. If we get 5+ emails stating memebers are ready now, we will do the group purchase.

This is also on another forum with redlines, so between the two sites we should be able to get everyone good prices :)

are you doing anything with the spec clutches

also your website had different prices that are lower than that group buy price.

So this is for 2.0? I didnt see this listed on Clutchmasters site, sweet if for the 2.0! How do they compare to the Spec Clutches?

Spec is cheaper, but anyone have experiences with clutch master?

are you doing anything with the spec clutches

also your website had different prices that are lower than that group buy price.

As stated in the first post, the % off on the above table comes off of the online price.

Meaning we dont sell at retail for an everyday low price.... We sell at 5% under.....
With this group purchase you take an addition % off the current online price, depending on the number of members in on it.

Spec clutches are as low as we will go. They are the prices online and they are already 10% off. No chance of and specials on them anytime soon.

So this is for 2.0? I didnt see this listed on Clutchmasters site, sweet if for the 2.0! How do they compare to the Spec Clutches?

Spec is cheaper, but anyone have experiences with clutch master?

Yes this is for the 2.0

The SPEC brand clutch only includes the pressure plate and disc. This includes the pressure plate, disc, TOB, etc.

Do you guys price match cause I have found these same clutch kits for $75 less even with your percentage price break.

I have one on the way, so I'll snap a few shots of all the components when it gets here hopefully tomorrow.

Do you guys price match cause I have found these same clutch kits for $75 less even with your percentage price break.
PM us the link to the site. We will look into it.

PM us the link to the site. We will look into it.


PM sent.

Yes this is for the 2.0

The SPEC brand clutch only includes the pressure plate and disc. This includes the pressure plate, disc, TOB, etc.

So spec doesnt give you all the parts to install the clutch you need extra's? thats pretty wack... How much do those parts cost? They are included in a normal clutch install?

The ClutchMasters come with an alignment tool, TOB, pressure plate and clutch disk.

Is the flywheel necassary? I'm not a big guru with trannys.

Is the flywheel necassary? I'm not a big guru with trannys.

fly wheel is not needed, but if you get a light weight one like the one they offer it helps you rev faster, and takes weight off your drivetrain which should make you a bit quicker.

Does the clutch masters clutch have directions as far as install and how to use the to0ls?

also It would be really kool to get a descrition of each, exact specs, pictures, etc.

Something tells me if you do the above this will be much more successful.

IM looking for something that is still streetable but can handle Stage 2 cobalt SS with all bolt ons, and maybe a smaller pulley down the road.

I should've got a 6 puck to begin with. My stg2 spec slips when I get on it after a while. then i have to let it cool down or sometin

From what we now see with spec, we would only suggest the "Plus" + series, they seem to do really well.

Per Clutchmasters website....

http://www.clutchmasters.com/shop/shop_image/product2/acura_stage1.jpe

FX100 (Stage I)
· High performance street system
· Holding capacity 70% over stock
· Heavy-Duty reinforced pressure plate
· Hi-Leverage™ pressure ring design
· Sprung hub/cushioned disc
· Steel backed organic friction material

--------------------------------------------------------------------------------
All Clutch Masters systems come complete with:
Pressure Plate
Clutch Disc
Throw-out Bearing (when applicable)
Pilot Bearing or Bushing (when applicable)
Alignment Tool

http://www.clutchmasters.com/shop/shop_image/product2/acura_stage2.jpe

FX200 (Stage II)
· Extra long life street system
· Holding capacity 70% over stock
· Heavy-Duty reinforced pressure plate
· Hi-Leverage™ pressure ring design
· Sprung hub/cushioned disc
· Steel backed Carbon Kevlar friction material

--------------------------------------------------------------------------------
All Clutch Masters systems come complete with:
Pressure Plate
Clutch Disc
Throw-out Bearing (when applicable)
Pilot Bearing or Bushing (when applicable)
Alignment Tool

http://www.clutchmasters.com/shop/shop_image/product2/acura_stage3.jpe

FX300 (Stage III)

· Heavy-duty street & racing system
· Holding capacity 110% over stock
· Heavy-Duty reinforced pressure plate
· Hi-Leverage™ pressure ring design
· Sprung hub/cushioned disc
· Steel backed Segmented Carbon/Kevlar

--------------------------------------------------------------------------------
All Clutch Masters systems come complete with:
Pressure Plate
Clutch Disc
Throw-out Bearing (when applicable)
Pilot Bearing or Bushing (when applicable)
Alignment Tool

http://www.clutchmasters.com/shop/shop_image/product2/acura_stage4.jpe

FX400 (Stage IV)

· Ultra heavy-duty street &racing system
· Holding capacity 170% over stock
· Heavy-Duty reinforced pressure plate
· Hi-Leverage™ pressure ring design
· Sprung hub/4-button
· Ceramic friction material
· SFI Approved on most race applications.
--------------------------------------------------------------------------------
All Clutch Masters systems come complete with:
Pressure Plate
Clutch Disc
Throw-out Bearing (when applicable)
Pilot Bearing or Bushing (when applicable)
Alignment Tool

http://www.clutchmasters.com/shop/shop_image/product2/flywheel.jpg

Typical benefits of a lightweight flywheel for various engine types:
Reduced mass equals increased acceleration.
A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag.
Increased supercharger efficiency due to less parasitic drag on the crank.
Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel.
CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels.
CM uses High Carbon steel for the friction surface. (Replaceable)
CM uses an OEM steel ring gear secured by bolts.
CM offers a limited lifetime warranty.
CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

I have a nice Fidanza sitting on my floor right now awaiting the FX300 CM Clutch. I'll keep you guys posted on all the details when I get it all in. Hoping by Saturday to have it all in.

i would do this...but clutchmasters clutches arent availiable for the 2.4 are they??..any idea when they might be??

i"m willing on the group purchase i'll be able to buy probably in the next two weeks. Anyone else?

I'm in because my clutch is about gone, but like you, i have to wait until my next check (2 weeks away) so i don't run my self short.

nice... so for a daily system what would you recommend? I dont race but i do accelerate pretty fast

Do Not Buy The Cm Clutch!!!! They Are A Piece Of Shit!!!! Search Under Clutch Masters Problems. Ull Find All Kind Of Stuff On Here As Well As The Rl Forum!! I Am Speaking From Experience I Own The Fx300 And I Can't Shift At High Rpm's!!! A Waste Of Money!!! Search For Your Self's If You Don't Believe Me!!

He's right, i'm looking at the bully lineup to replace my CM FX400 and i even had the newest version.

This thread is about 8 months old now.

But yea, Nothing but bad things about CM. They keep blaming bad installs the reason. They refuse to own up that there is a problem.

whoops my bad then i dont read time staps well