INTENSE would like to spread the word about our brand new polyurethane trans mounts for the LSJ. In order to do so, INTENSE is offering a FREE set of LSJ polyurethane transaxle mounts with every order over $100.00 now through Friday, July 21st, 2006. Our online ordering system will take care of everything automatically just make your choice when you checkout and enjoy these fantastic new mounts on us!

nice I wanna buy some stuff anyway.. glad i waited.

WOW! Nice deal. Thanks.

I'm going to be getting the Ingalls ETD so that works out lovely!

INTENSE. Where are your Ingalls ETD's on your website???? I looked everywhere.

Hmm...whats an Ingalls ETD?

If your talking about the torque dampner we don't sell it, and in facts its not even needed with the control arm bushings and these trans mounts. Rob went back to hist stock brace after installing these.

Yeah i'm talking about the Ingalls Engine Torque Damper.
Wow, I thought you guys sold it.
I might have to go with those controll arm bushings and get the free trans mount.
Thanks bro......

I don't see anything on there that I want, haha.

Do you guys sell Sportlines?

If you only had a ported blower housing in stock......

If you only had a ported blower housing in stock......

We are trying hard to keep up with demand. Cores are coming back slowly from customers so it makes it hard to keep up.

Damn and I just ordered over $500 of parts from u guys recently... That sucks I missed this offer cause I really need em. Look me up name: Joe Sarnicki, 456 Hamilton Dr. Wheaton, IL. 60187... If you could hook me up that would really kick ass cause I always order from you!!!

We are trying hard to keep up with demand. Cores are coming back slowly from customers so it makes it hard to keep up.


I understand.:)

do they fit 04 redline ?

If you only had a ported blower housing in stock......


I feel the same way :nuts:

Damn and I just ordered over $500 of parts from u guys recently... That sucks I missed this offer cause I really need em. Look me up name: Joe Sarnicki, 456 Hamilton Dr. Wheaton, IL. 60187... If you could hook me up that would really kick ass cause I always order from you!!!
Hey me too. I ordered your PCM, Injectors, and wiring harness a little over a month ago. Hook it up! Please.:twothumbs

has Intense tried fitting one of those inserts into a front tranny mount for an 04 Redline? It's a different mount from the one used in the 05/06 models of Redline/CobaltSS

I may just be stupid but i'm a little unsure about where these mounts go. do they just press into where the stock rubber trans mounts are or is this somethign completely different?

also is that $100 before taxes cause all i really need from you is an MPS ($99.99) at least for now.

I just ordered a interceptor gauge last week and it hasnt shipped yet, I shouldve waited :(

Man this sucks I already bought them and put them in. :(

how hard is the install?
how long does it take?

is there any news on the Aeroforce gauge yet, cause I wanna get it, and now would be the perfect time lol

Thanks guys, I just placed my order. :twothumbs

You are by far my favorite vendor. Once again you've gone above and beyond. What a deal!!! :cssNET:

I guess these guys are real busy cuz they never seem to get around to answering emails or following up on forum questions...:thumbsdow

I guess these guys are real busy cuz they never seem to get around to answering emails or following up on forum questions...:thumbsdow


i was up at their shop last friday and everyone one of them are running around like a chicken with their heads cut off :lol: so i guess you could say they are pretty busy

yeah I can imagine they are, they have lots of stuff that everyone wants these days!

We are usually extremely busy and answer emails as promptly as we can and all phone calls within 1 hour of leaving a message. It doesnt always work out that way depending on the demands of the day but it is what we try for.

SO

how hard is the install?
how long does it take?

is there any news on the Aeroforce gauge yet, cause I wanna get it, and now would be the perfect time lol

can I purchase the gauge now, you send me the updated version when you get the from Aeroforce

Dang it! I just ordered my 42.5lb injectors and my casper harness not to long ago too. Shat! I wish you guys did this earlier!! :-(

SO

how hard is the install?
how long does it take?

is there any news on the Aeroforce gauge yet, cause I wanna get it, and now would be the perfect time lol

can I purchase the gauge now, you send me the updated version when you get the from Aeroforce

Install isnt to tough. Hardest part is getting old bushings out.

Install isnt to tough. Hardest part is getting old bushings out.


you already have them in there?

if so what's the ride like from the vibrations?

you already have them in there?

if so what's the ride like from the vibrations?
The vibrations are pretty noticable but only when idleing. Easy solution (if you have HP Tuners) is to bump the idle up a few hundred rpm and almost all of the vibrations go away.

you already have them in there?

if so what's the ride like from the vibrations?

Yes I do I did the preorder when they offered it. Whish I would have waited now though.

Not to much different actually you feel them a little bit more but not a whole lot.

Yes I do I did the preorder when they offered it. Whish I would have waited now though.

Not to much different actually you feel them a little bit more but not a whole lot.

How do these effect shifting in the car? Easier?

so if i buy those JBP control bushing ill get the transaxle bushing free?

if so ill put in my order tomorrow for the controll arm bushings

Yes I do I did the preorder when they offered it. Whish I would have waited now though.

Not to much different actually you feel them a little bit more but not a whole lot.


i read on their site that they were softer than most of the other poly mounts, and that they would not vibrate as much, but i was not going to install them until i got an opinion from someone beforehand. i might put them in one night this week, it looks to be about an hour or so job with a press.

Ordered an Aeroforce Interceptor just a bit ago, wanted to say thanks for the free mounts. :twothumbs

just placed my order yesterday

was just wondering how long these going to take to come to my door?

control arm bushing and transaxles

thanks INTENSE, I just ordered my Aeroforce gauge

I have 2 cobalt SS/SC's. Can I order a set of Poly mounts and something else to make $100+, and still recieve the second set of Poly Mounts for free?

if your bill is over $100 the computer automatically asks if you want them for free.

Just a few days left to get these great transaxle mounts for FREE!

http://www.intense-racing.com/pics/ebay/ctm/ebay_ctm_320.jpg

http://www.intense-racing.com/pics/ebay/ctm/ebay_ctm2_320.jpg

i got my free transaxle bushing just waiting for them to come to my door

ordered a gauge today. someone do a how to on the bushing install, for all us noobs so when ours get here we can do it.

i may do a how to will see maybe ill take some pics for u guys

Thanks for doing this INTENSE, you guys rock.

I can't wait to get the gauge and mounts in :)

do it.

hey, if anyone gets a set and has a spare one left over then I'd like to buy it cuz I only need a single for the front......I already have a billet poly rear mount....
thanks

I got them installed today but it wasn't easy (the 2004 Red Line has a different front mount so it has nothing to do with the product, it is great) The rear one fits fine but the insert on the front 04 mount is a bit smaller then the 05+ mount so it took a little modification, some power tools, and a lot of patience to get the insert in.

We (when I say we, I mean Enufpwr ) had to trim the leading edge on the front of the mount, even then it was pretty difficult to get the insert into the mount. Once it was installed we had to cut about a half inch off the back of the insert so it would fit back on the car. It took a blow torch, razor knife, big ass rubber hammer, vice, and a saws-all to get that front one in, but it's in now and that's all that matters.

Thanks to Enufpwr for spending so much time on my car and to Intense for the free mounts.

http://img.photobucket.com/albums/v284/jmonte345/Forums/DSCN1364.jpg
http://img.photobucket.com/albums/v284/jmonte345/Forums/DSCN1365.jpg
http://img.photobucket.com/albums/v284/jmonte345/Forums/DSCN1366.jpg
http://img.photobucket.com/albums/v284/jmonte345/Forums/DSCN1367.jpg
http://img.photobucket.com/albums/v284/jmonte345/Forums/DSCN1368.jpg
http://img.photobucket.com/albums/v284/jmonte345/Forums/DSCN1369.jpg

nice pics

ill prob be installing mine next weekend if the parts come in this week which im sure they will

hope i dont need to chop and paste like u did tho

Did you guys cut your stock bushings away like the others did in their how to?

Or did you find a better way to remove them?

I will probably be installing mine in the next week or so, just curious

Did you guys cut your stock bushings away like the others did in their how to?

Or did you find a better way to remove them?

I will probably be installing mine in the next week or so, just curious
There is no need to cut them out. Use a big flat head screwdriver between the mount and the bushing and use it to seperate the bushing from the mount.

Someone make a howto before I get them in and f sumthing up.

Someone make a howto before I get them in and f sumthing up.

there's already a ghetto how to that you can use... it get's the job done none the less look through this thread i dont feel like it.

just got my pulley and free transaxle mounts in the mail today..... so sexy! thanx intense and Todd Allan is the shit. i just wanted to verify that for those of you who dont already know.

Someone make a howto before I get them in and f sumthing up.

Pretty simple to install really isnt much you can screw up actually.

Pretty simple to install really isnt much you can screw up actually.


anyone got a few pics of the mounts and where the bolts are to get the out?

found it.. caveman how to. but it works.

http://www.cobaltss.net/forums/showthread.php?t=26621&highlight=transaxle

someone should sticky that

There is no need to cut them out. Use a big flat head screwdriver between the mount and the bushing and use it to seperate the bushing from the mount.

Awesome, I'll try it that way when I do mine, hopefully this weekend if I can find the time.

The how to I found was very well done as far as showing the locations of the bolts in the mounts and such, just a little lacking on the dis-assembly of the stock mounts

found it.. caveman how to. but it works.

http://www.cobaltss.net/forums/showthread.php?t=26621&highlight=transaxle


thats the best how to on the transaxle bushings someone sticky that

found it.. caveman how to. but it works.

http://www.cobaltss.net/forums/showthread.php?t=26621&highlight=transaxle
thats the best how to on the transaxle bushings someone sticky that



Thanks to Enufpwr for spending so much time on my car and to Intense for the free mounts.


No problem Jason :)

Jason, I also posted your pics into that how-to thread above. That way people will be able to find the info faster when needed. :twothumbs