The OFFICIAL Cobalt 1/8 Mile List!
Thread Starter
Senior Member
Joined: 03-30-06
Posts: 3,014
Likes: 0
From: Exit 29, NY
The OFFICIAL Cobalt 1/8 Mile List!
I need a time slip in order to post ur times, PM me.
SS/SC ,STOCK,the way it is from the factory
1.)stg2cobalt, 9.234@ 77.122 w/ 2.186 60Ft
2.)hatrickstu, 9.3312@ 78.71 w/ 2.2931 60Ft
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
SS/SC, MODDED
1.)Bad06SS, 8.606@ 81.61 w/ 1.95 60Ft 2.6"P/T/GMH/CD/DR
2.)hatrickstu, 8.9553@ 81.91 w/ 2.1676 60Ft GM2/E/Ingalls
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, MODDED
1.)Brandon97Z, 9.6672@ 74.01 w/ 2.2814 60Ft Coupe, 5spd,I/E/T
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts,STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts, MODDED
1.)RollOver360, 8.803@5.11(??) w/ 1.877 60Ft coupe, 5spd, I,E
2.)RollOver360, 9.220@61.89 w/ 2.576 60Ft
3.)RollOver360, 9.633@61.64 w/ 3.012 60Ft
4.)RollOver360, 9.703@59.92 w/ 2.933 60Ft
5.)Rollover360, 9.781@59.13 w/ 2.945 60Ft
6.)
7.)
8.)
9.)
10.)
I= Intake
H=Header
GMH=GMPP Manifold
E=Cat-back exhaust
T=Tuning
P=Underdrive Pulley
DR=Drag Radials or Slicks
ST=Street Tires
N02=Nitrous
TK=Turbo Kit
0.0" Will specify pulley size for the SS/SC's
WI=Water/Meth Injection
PB= Ported Blower
GM= GM Stage 1
GM2=GM Stage 2
DP=Aftermarket Downpipe
CD=Cat Delete
SS/SC ,STOCK,the way it is from the factory
1.)stg2cobalt, 9.234@ 77.122 w/ 2.186 60Ft
2.)hatrickstu, 9.3312@ 78.71 w/ 2.2931 60Ft
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
SS/SC, MODDED
1.)Bad06SS, 8.606@ 81.61 w/ 1.95 60Ft 2.6"P/T/GMH/CD/DR
2.)hatrickstu, 8.9553@ 81.91 w/ 2.1676 60Ft GM2/E/Ingalls
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, MODDED
1.)Brandon97Z, 9.6672@ 74.01 w/ 2.2814 60Ft Coupe, 5spd,I/E/T
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts,STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts, MODDED
1.)RollOver360, 8.803@5.11(??) w/ 1.877 60Ft coupe, 5spd, I,E
2.)RollOver360, 9.220@61.89 w/ 2.576 60Ft
3.)RollOver360, 9.633@61.64 w/ 3.012 60Ft
4.)RollOver360, 9.703@59.92 w/ 2.933 60Ft
5.)Rollover360, 9.781@59.13 w/ 2.945 60Ft
6.)
7.)
8.)
9.)
10.)
I= Intake
H=Header
GMH=GMPP Manifold
E=Cat-back exhaust
T=Tuning
P=Underdrive Pulley
DR=Drag Radials or Slicks
ST=Street Tires
N02=Nitrous
TK=Turbo Kit
0.0" Will specify pulley size for the SS/SC's
WI=Water/Meth Injection
PB= Ported Blower
GM= GM Stage 1
GM2=GM Stage 2
DP=Aftermarket Downpipe
CD=Cat Delete
Last edited by RollOver360; Sep 2, 2006 at 11:33 AM.
Premium Member
Joined: 02-23-05
Posts: 863
Likes: 0
From: Florida
Can't seem to make it out to a track, but if you count a run done with my Interceptor gauge, then 8.71 @ 83 mph would be my best so far. Need to practice my launches more and also get to a real track.
If you guys want one, it needs to be organized, like the 1/4 mile list. It would need to be proved by timeslip, you'd need to know what mods, manual or auto, coupe or sedan, etc.
Also, you need to have it where all of the times are updated in the first post, so user's don't have to click through a ton of pages to find their info.
Also, you need to have it where all of the times are updated in the first post, so user's don't have to click through a ton of pages to find their info.
Originally Posted by RollOver360
Alright, u guys that posted times, PM ur slips along with your info like mods, 5spd or auto, coupe or sedan, etc. Thanks Bad06SS for the guidence.
later
later
No problem, the 1/4 mile list that I've been updating has been working great so far, so it should work well for you guys. Also, you'll want to PM a moderator, and ask him to make it a sticky so it's always at the top.
Senior Member
Joined: 07-04-05
Posts: 947
Likes: 0
From: Anniston,Alabama
10.1@69.96 1/8th i got time slip to prove or u can watch video on streetfire....mods are intake and street tires at run ::5 speed:: .....rollover i dont see ur car doing anything below a 10 on the 8th with those mods or is that just a example?
New Member
Joined: 06-05-06
Posts: 37
Likes: 0
From: vancouver island canada
I pulled a 15.1 at 98.74 mph on the 1/4 with a reaction time of.228.I pulled 6.307 at57.821mph reaction time of.679 on the 1/8
bone stock.the temperature and humidity might have something to do with it.
bone stock.the temperature and humidity might have something to do with it.
Originally Posted by collin
I pulled a 15.1 at 98.74 mph on the 1/4 with a reaction time of.228.I pulled 6.307 at57.821mph reaction time of.679 on the 1/8
bone stock.the temperature and humidity might have something to do with it.
bone stock.the temperature and humidity might have something to do with it.
just looked up my best 1/8 time "stock" and it was 9.33 @ 78.71. i will say that i wasnt "as it was from the factory" i had the flowmaster that i am running now, but i have been told from every muffler shop since that this muffler is actually hurting my car because it is not good for a FI car.
Senior Member
Joined: 04-29-06
Posts: 552
Likes: 0
From: charlotte, nc
Senior Member
Joined: 04-03-06
Posts: 7,570
Likes: 0
From: Mesa, AZ
Originally Posted by hatrickstu
just looked up my best 1/8 time "stock" and it was 9.33 @ 78.71. i will say that i wasnt "as it was from the factory" i had the flowmaster that i am running now, but i have been told from every muffler shop since that this muffler is actually hurting my car because it is not good for a FI car.
I'd say stock minus 5 hp!
Thread Starter
Senior Member
Joined: 03-30-06
Posts: 3,014
Likes: 0
From: Exit 29, NY
Originally Posted by 05sedan
10.1@69.96 1/8th i got time slip to prove or u can watch video on streetfire....mods are intake and street tires at run ::5 speed:: .....rollover i dont see ur car doing anything below a 10 on the 8th with those mods or is that just a example?
Also need a time slip for hatrickstu.
Collin also.
Keep it coming guys.
later
Senior Member
Joined: 07-04-05
Posts: 947
Likes: 0
From: Anniston,Alabama
Originally Posted by RollOver360
I need a time slip in order to post ur times, PM me.
SS/SC ,STOCK,the way it is from the factory
1.)hatrickstu, 9.3312@ 78.71 w/ 2.2931 60Ft
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
SS/SC, MODDED
1.)hatrickstu, 8.9553@ 81.91 w/ 2.1676 60Ft Coupe, 5spd, GM2/E/Ingalls
2.)stg2cobalt, 9.234@ 77.122 w/ 2.186 60Ft Coupe, 5spd, GM2
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, MODDED
1.)Brandon97Z, 9.6672@ 74.01 w/ 2.2814 60Ft Coupe, 5spd,I/E/T
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts,STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts, MODDED
1.)RollOver360, 8.803@5.11(??) w/ 1.877 60Ft coupe, 5spd, I,E
2.)RollOver360, 9.220@61.89 w/ 2.576 60Ft
3.)RollOver360, 9.633@61.64 w/ 3.012 60Ft
4.)RollOver360, 9.703@59.92 w/ 2.933 60Ft
5.)Rollover360, 9.781@59.13 w/ 2.945 60Ft
6.)
7.)
8.)
9.)
10.)
I= Intake
H=Header
GMH=GMPP Manifold
E=Cat-back exhaust
T=Tuning
P=Underdrive Pulley
DR=Drag Radials or Slicks
ST=Street Tires
N02=Nitrous
TK=Turbo Kit
0.0" Will specify pulley size for the SS/SC's
WI=Water/Meth Injection
PB= Ported Blower
GM= GM Stage 1
GM2=GM Stage 2
DP=Aftermarket Downpipe
CD=Cat Delete
SS/SC ,STOCK,the way it is from the factory
1.)hatrickstu, 9.3312@ 78.71 w/ 2.2931 60Ft
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
SS/SC, MODDED
1.)hatrickstu, 8.9553@ 81.91 w/ 2.1676 60Ft Coupe, 5spd, GM2/E/Ingalls
2.)stg2cobalt, 9.234@ 77.122 w/ 2.186 60Ft Coupe, 5spd, GM2
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.4 SS, MODDED
1.)Brandon97Z, 9.6672@ 74.01 w/ 2.2814 60Ft Coupe, 5spd,I/E/T
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts,STOCK
1.)
2.)
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
2.2 Cobalts, MODDED
1.)RollOver360, 8.803@5.11(??) w/ 1.877 60Ft coupe, 5spd, I,E
2.)RollOver360, 9.220@61.89 w/ 2.576 60Ft
3.)RollOver360, 9.633@61.64 w/ 3.012 60Ft
4.)RollOver360, 9.703@59.92 w/ 2.933 60Ft
5.)Rollover360, 9.781@59.13 w/ 2.945 60Ft
6.)
7.)
8.)
9.)
10.)
I= Intake
H=Header
GMH=GMPP Manifold
E=Cat-back exhaust
T=Tuning
P=Underdrive Pulley
DR=Drag Radials or Slicks
ST=Street Tires
N02=Nitrous
TK=Turbo Kit
0.0" Will specify pulley size for the SS/SC's
WI=Water/Meth Injection
PB= Ported Blower
GM= GM Stage 1
GM2=GM Stage 2
DP=Aftermarket Downpipe
CD=Cat Delete
im sorry but even with intake and a exhaust a mid 9 in the 1/8th isnt believeable for a 2.2
u had to have something else there or lieing about the times...59-61mph is way to low for a 9 1/8th that mph is more around the times of a 11 1/8th not 9... or the tree wasnt working right...
so im calling bs...please post the whole slip i would like to see it...ill send my slip monday
Senior Member
Joined: 04-29-06
Posts: 552
Likes: 0
From: charlotte, nc
SS/SC, MODDED
1.)hatrickstu, 8.9553@ 81.91 w/ 2.1676 60Ft Coupe, 5spd, GM2/E/Ingalls
2.)stg2cobalt, 9.234@ 77.122 w/ 2.186 60Ft Coupe, 5spd, GM2
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
my friend i was stock back then
no stg 2
1.)hatrickstu, 8.9553@ 81.91 w/ 2.1676 60Ft Coupe, 5spd, GM2/E/Ingalls
2.)stg2cobalt, 9.234@ 77.122 w/ 2.186 60Ft Coupe, 5spd, GM2
3.)
4.)
5.)
6.)
7.)
8.)
9.)
10.)
my friend i was stock back then
no stg 2