Original Response when asked which bumper was which...

gculley@fredbeans.com wrote:

Steven, I'm not exactly sure what you mean. All SS bumpers are the same. So you have lost me here. Gene.

My Response to his email
That's actually incorrect. On Cobalt models using the 2.0L Supercharged motor, the appearance or body kit contains a lip kit, these front and rear bumpers are pre cut, so if you do not have the lip the holes remain exposed. On Cobalt models using the 2.4L motor, the appearance or body kit does not contain a lip kit and no holes are drilled or cut into the bumper.

Here is a picture of both to show the difference.

2.4L
http://www.chevrolet.com/i/pic/cobalt/2007/photogallery/ext_gallery01.jpg

2.0L Supercharged
http://www.chevrolet.com/i/pic/cobalt/2007/photogallery/ext_gallery03.jpg


So I suppose in your response, yes the two bumpers look the same, but one should have slits cut into the bumper to accomidate for the ss/sc lip kit.

Need more info...

I was looking on fred bean for a new 2.4L Front bumper and they have them listed as the SS and the Sport... So i emailed him asking which bumper was which, and thats when he replied that all SS bumpers are the same.

Nevermind, stupid post i guess.

This thread is as http://img.photobucket.com/albums/v446/mkulrey13/supergay.gif as you thinking why this thread was useful.... :lol:

2.0 & 2.4 SS front bumpers are the SAME!!!!!!!!

add the bottom lip to 2.4 bumper to make it FULL 2.0 front bumper

so fred beans is kinda right

Nevermind, stupid post i guess.

yea i would think so, not cool coming out and bashing him

I put a ss 2.4 on my first LS Cobalt. The part number for that is 12336074

2.0 & 2.4 SS front bumpers are the SAME!!!!!!!!

add the bottom lip to 2.4 bumper to make it FULL 2.0 front bumper

so fred beans is kinda right

Yeah but you'd need to cut holes in the 2.4 bumper for the lip to fit. They are 2 completely different parts with different part #'s

Im just curious. Are all the bumpers interchangable. I recently got into a bit of a fender bender and my stock bumper is cracked and skuffed a little and I was thinking about going with a LT or SS bumper on my LS if it would work. Anyone know?

yeah they should fit

lol poor guy who made this post..watch him get harrassed for the next few months...too bad u can't change the title..

i have a 2.4 and there are little mounting tabs on the underside of the front bumper, i assume for the lip kit.

No i made the post, and I made it to find out an answer. I'm not a person that takes internet "flaming" as an insult because it doesn't mean anything.

Everyone appearntly has mixed signals. Yes it's different, no it's not. So who the hell is right?

it's entirely possible that SOME are different.

looking at the underside of mine, it looks like a lip would install with little to no modification. at the most, drilling a few small screw holes.

No i made the post, and I made it to find out an answer. I'm not a person that takes internet "flaming" as an insult because it doesn't mean anything.

Everyone appearntly has mixed signals. Yes it's different, no it's not. So who the hell is right?


Ok heres your definitive answer. There are 6 different Cobalt front ends, below is the list.
We'll start at the base model and work our way up.

1.#19120183 Cobalt LT base model
2.#19120182 Cobalt LT trim level 1
3.#19120179 Cobalt LS
4.#19120181 Cobalt LS w/fog lights
5.#12336074 Cobalt SS levels 1 & 2
6.#19120184 Cobalt SS supercharged

The non SC cars DO HAVE a completely different front end.
The SC cars have 12 retainers part#22688427 that hold the fascia extension part#12336084 to the front fascia. The extension mounts though 12 holes in the fascia that are pre-cut from the factory.

In short they are two completely different front ends. I hope this helps you.

Thank You.. that's what i thought to begin with. I just didn't know the part #'s to back it up.

Thank You.. that's what i thought to begin with. I just didn't know the part #'s to back it up.

If you ever need help with part #'s just PM me. I work at a Chevy dealership in the parts department and have been selling parts for about 15 years now. And if I can't find something I have 10 other guys here at work with me all with years and years of parts experence so between all of us I'm sure we can help you.

That goes for anyone out there, if you need any parts help just PM me and I'll be glad to help you.

How much is the #12336074?

12336074 is 175.00 give or take depending on what dealer you get it from.

Right now there is 11 of them avalible so if you want one DO NOT WAIT AROUND!

This thread is as http://img.photobucket.com/albums/v446/mkulrey13/supergay.gif as you thinking why this thread was useful.... :lol:


:lol: :lol: :lol:

Can you tell me the difference in the base lt and the level 1 lt bumpers?

Sure the base Cobalts front end is all a solid piece with color matched grills that are molded on. A Cobalt level 1 trim has seperate black grill parts.

12336074 is 175.00 give or take depending on what dealer you get it from.

Right now there is 11 of them avalible so if you want one DO NOT WAIT AROUND!


Only 11 in the nation or what.

Only 11 in the nation or what.

Yes, only 11 in the WORLD! I'm sure they'll make more but right now thats it.

Whats up with GM not having parts when my TCM went they had to get one from Canada because it was the only availible one because the other one got ordered the day before mine.

It's GM.... They're Broke.

No they're just cranking out cars as fast as the parts suppliers can make them is all.

Remember GM does not make the parts the cars are built from, their suppliers do.