|
View Full Version : Valve Springs and Retainers are here!!! Dezod 11-16-2006, 05:24 PM http://www.dezod.com/cat_valve_springs_retainers2.cfm Choice of 3 different configurations for any of your needs!!! High Reving HP is now 100x more reliable. These configurations are proven to operate up to 9-10K of revs in testing. cobaltBlackss 11-16-2006, 05:32 PM Sweet!!! Good price! Can you explain the different lb ratings? Ljavy17 11-16-2006, 05:46 PM are these good for the 2.0 Ljavy17 11-16-2006, 05:47 PM nevermind I just saw it, what else would u need to run an 8k redline though. other than this. g5mike 11-16-2006, 05:49 PM how do you think your valve springs compare to JBP and theirs in terms of quality and price,Im installing my stage2 triflow cams this week,educate me. Also by raising the rev line with these due you not risk the chance a floating a valve That Cobalt LT Guy 11-16-2006, 05:49 PM Most likely a timeing change and and a knock guage Ljavy17 11-16-2006, 05:51 PM I guess you woul dhave to take away timing right. Dezod 11-16-2006, 07:03 PM Camshaft profile will determine what VS&R package to choose. Each camshaft will require a particular amount of spring pressure etc. These are VERY high quality and require some forethought before purchasing. beamSS 11-16-2006, 08:44 PM sorry newbie question. can we do this mod with stock camshafts? DWK5150 11-16-2006, 11:21 PM Nice do these come with the smaller seals?? cobaltBlackss 11-18-2006, 12:33 PM Now to find some cams... g5mike 11-18-2006, 12:36 PM Cams www.jbodyperformance.com cobaltBlackss 11-18-2006, 01:02 PM I think I'm gonna wait for the market to get a little bigger, maybe some other vendors will be coming out with cams soon. Dezod 11-21-2006, 10:55 AM We will be offering cams shortly. Dezod 11-28-2006, 10:56 AM Ok guys.........Lemme know what you need. :) 06blackg85ss 11-28-2006, 11:00 AM I should have my list ready for ya in a week or so GTP 11-28-2006, 12:16 PM Ok guys.........Lemme know what you need. :) Any support for us 2.4 guys? Dezod 11-29-2006, 01:11 PM I should have my list ready for ya in a week or so Ok. Will be looking forward to it! Dezod 11-29-2006, 01:12 PM Any support for us 2.4 guys? Not in the valve category yet! cobaltBlackss 11-29-2006, 01:50 PM We will be offering cams shortly. When! Custom grind? Price range? Dezod 11-30-2006, 12:02 PM When! Custom grind? Price range? Not quite sure yet. Still in the prelim stages of discussion. Witt 01-26-2007, 12:51 PM Ordered a set of springs and retainers last night for the stock spring seats. Awesome price with slightly higher spring pressure than ferrea's. BTW, Supertech is a respected name among the import guys, nice to see them come to the domestic compact market. BlackSS/SC 01-26-2007, 12:58 PM Which ones would a guy run on stock cams? Witt 01-26-2007, 12:59 PM One set is made for stock spring seats, the other two have to use aftermarket seats. You really can't beat this deal, it comes with titanium retainers. Dezod 01-29-2007, 01:54 PM Which ones would a guy run on stock cams? A few people ordered these over the last 2 weeks or so! The 78lb one if you want to keep OEM seats: http://dezod.com/pd_supertech_titanium_retainers_stainless.cfm Don't forget about the valves too, which SuperTech has in standard or overbore and choice of material (Stainless or Inconel) http://dezod.com/cat_valves3.cfm |