Problems/Service/Maintenance Do you have problems with your new 2.0, 2.2, or 2.4L? What kind of service did you have done?

key wont come out of the ignition

Thread Tools
 
Search this Thread
 
Old Nov 28, 2006 | 12:35 PM
  #1  
Cipher117's Avatar
Thread Starter
New Member
 
Joined: 06-10-06
Posts: 140
Likes: 0
From: Magnolia, Arkansas
key wont come out of the ignition

my car is in the shop currently but friggin key wont come out of the ignition (which has caused my battery to die) and i've been having off and on problems with the cruise control. sometimes it wants to work and then again, it acts like it has a mind of its on. before people try to flame me on the key part, theres three positions that the key can be in while in the ignition (i dont know the exact name of the positions so i'll just be simple about it). theres the position where you first put it in, then theres the position that says ACC i think and then theres the position where you would crank your engine up. its stuck in the ACC and wont let me turn the key towards me all the way so i can take it out. pissing me off to say the least. anyone else having problems like these?

Last edited by JonyyB; Nov 28, 2006 at 01:07 PM. Reason: Inappropriate title changed
Reply
Old Nov 28, 2006 | 12:39 PM
  #2  
c0baltic's Avatar
Senior Member
 
Joined: 08-05-06
Posts: 1,552
Likes: 0
From: long island
the last week or so my key has been sticking in my ignition.. i realize it is because when i put it in park it is not presing the button that says the car is in park and it's ok to take the key out ..so when i park i just push my shifter forward just a lil more and since then no problesm

-drew
Reply
Old Nov 28, 2006 | 12:43 PM
  #3  
memphisr24's Avatar
Senior Member
 
Joined: 03-20-05
Posts: 6,313
Likes: 1
From: Rutherford, NJ
Did you try turning the steering wheel a bit to the left/right and then trying to take the key out?
Reply
Old Nov 28, 2006 | 12:44 PM
  #4  
JRANGER's Avatar
Senior Member
 
Joined: 06-14-06
Posts: 2,535
Likes: 0
From: Nashville, TN
I have the same problem. Taking it in tomorrow. Pretty much what I do when it wont pull out I just keep putting the shifter in and out of park until the key will come out. Usually just pushit back and fourth 3 or 4 times and it usually will then come out
Reply
Old Nov 28, 2006 | 12:51 PM
  #5  
bluecobaltss06's Avatar
Senior Member
 
Joined: 11-14-05
Posts: 997
Likes: 0
From: Dumont, NJ
it depends on the year of the cobalt. some of them have a shifter problem. if you play with the shifter button untill it properly sits, youll hear it click then you should be able to take the key out. some of them have bad lock cylinders. if you take a mallet and hit the key with the mallet so its pushing it inward lightly you will eventually be able to take it out, also shake violently when trying to turn it off
Reply
Old Nov 28, 2006 | 01:08 PM
  #6  
lightningfast5's Avatar
Senior Member
 
Joined: 09-21-06
Posts: 1,294
Likes: 0
From: Kenowhere, Wisconsin
if you look in your car manual it tells you how to get the key out if its stuck. im not exact but there is a rubber piece under the wheel and u pop that out and there is a button i there u press while turning the key. Something like that. The manual tells exactly and even shows a picture or 2.
Reply
Old Nov 28, 2006 | 01:19 PM
  #7  
Goat07's Avatar
New Member
 
Joined: 12-17-05
Posts: 23
Likes: 0
From: Medina, Ohio
My key was sticking in mine i took it to the dealer and they replaced the shifter took like 2 hours i think. My key hasn't stuck since.
Reply
Old Nov 28, 2006 | 01:24 PM
  #8  
c0baltic's Avatar
Senior Member
 
Joined: 08-05-06
Posts: 1,552
Likes: 0
From: long island
i just looked it up.. check your user manulethe page is 2-18.. you need to take the rubber protecttor off below your ignition and stick your finger up into the hole and twords the door there will be a button press that while turning the key to Lock position'

-drew
Reply
Old Nov 28, 2006 | 03:42 PM
  #9  
Bandit2941's Avatar
Senior Member
 
Joined: 10-28-05
Posts: 589
Likes: 1
From: Upstate NY
Originally Posted by Cipher117
my car is in the shop currently but friggin key wont come out of the ignition (which has caused my battery to die) and i've been having off and on problems with the cruise control. sometimes it wants to work and then again, it acts like it has a mind of its on. before people try to flame me on the key part, theres three positions that the key can be in while in the ignition (i dont know the exact name of the positions so i'll just be simple about it). theres the position where you first put it in, then theres the position that says ACC i think and then theres the position where you would crank your engine up. its stuck in the ACC and wont let me turn the key towards me all the way so i can take it out. pissing me off to say the least. anyone else having problems like these?
If the battery is dead the key won't come out of the ignition. It's likely that the battery went dead first thereby locking they key in the ignition.
Reply
Old Nov 28, 2006 | 03:48 PM
  #10  
Jackalope's Avatar
Senior Member
 
Joined: 08-12-06
Posts: 12,764
Likes: 1
From: here
Its a problem with some Cobalts and due to it the shifters are now on back order waiting for a replacement for the original. The HHR's have the same issue according to my service dept.
Reply
Old Nov 28, 2006 | 08:54 PM
  #11  
Cipher117's Avatar
Thread Starter
New Member
 
Joined: 06-10-06
Posts: 140
Likes: 0
From: Magnolia, Arkansas
when it first happened, i pushed back and forth on it and then cranked the car up again hoping that it would come out. that worked at first but then i had to try other things like turning the steering wheel and i even tried shifting through all the gears (dont know how that would have helped but it worked once). its happened numerous times. i dont think the battery was dead when it happened the first few times but it sure as hell was when i tried to go to class this morning. i called my local dealership and they towed it with no charge to there and are working on it right now. on the way home, i stopped by to see if they had made any headway and i noticed that, when i looked inside of it, they had taken out the shifter (auto) and left a naked hole with wiring and stuff and that they had taken off the bottom part of the steering column. the guy said that i had a faulty wiring harness, from my guess, in something to do with the shifter. very interesting about the manual though, im going to have to look that up.
Reply
Old Nov 29, 2006 | 10:24 AM
  #12  
JRANGER's Avatar
Senior Member
 
Joined: 06-14-06
Posts: 2,535
Likes: 0
From: Nashville, TN
well mine is in getting worked on. I hope it done today but the people in the service department said if its not Our 36,000 mile warranty covers a rental car.
Reply
Old Dec 4, 2006 | 12:53 PM
  #13  
Cipher117's Avatar
Thread Starter
New Member
 
Joined: 06-10-06
Posts: 140
Likes: 0
From: Magnolia, Arkansas
my car got fixed in 2 days. i looked at the the repair bill that i didnt have to pay, hehehe, and it said that there WAS a faulty something or nother with the shifter. wiring in there wasnt registering or something. so if anyone else has this problem, since im not the first, take it to your dealership and tell them to check there first because thats probably where the problem is.
Reply
Old Dec 4, 2006 | 10:14 PM
  #14  
linz's Avatar
New Member
 
Joined: 11-09-06
Posts: 3
Likes: 0
From: Lethbridge, Alberta
Probably the Solenoid (dont know if thats the right spelling). Thats what they replaced in mine and the shifter cause you cant order just the solenoid. Apparently its the thing that tells your ignition that your car is in park and therefore to unlock/let you remove the key.
Reply
Old Dec 16, 2006 | 04:04 PM
  #15  
Firstnaplesbalt's Avatar
New Member
 
Joined: 11-27-06
Posts: 7
Likes: 0
From: Naples, Fl
the problem with the ignition is common in chevy cobalts they will replace the shifter under warranty becasue gm has put out a tsb for the problem its labeled 066-07-30-004c
Reply
Old Dec 31, 2006 | 12:51 PM
  #16  
Trey6417's Avatar
New Member
 
Joined: 11-29-06
Posts: 41
Likes: 0
From: Tennessee
wow, you guys really rock. I love this site now. I just got my cobalt maybe a month ago and have been looking at this site off and on. Then I had this problem with the key getting stuck yesterday and I could feel the dollar bills flying out of my pocket thinking of what it'll cost to get this fix. But the jiggling the key and shifter thing works! Thanks to you guys.
Reply
Old Dec 31, 2006 | 01:02 PM
  #17  
Tung's Avatar
Senior Member
 
Joined: 10-10-06
Posts: 658
Likes: 0
From: Maple Ridge, BC, CANADA
ya same thing happened to me yesterday
Reply
Old Jan 2, 2007 | 08:13 AM
  #18  
skitzianist's Avatar
New Member
 
Joined: 04-03-06
Posts: 95
Likes: 0
From: Maryland
Originally Posted by c0baltic
the last week or so my key has been sticking in my ignition.. i realize it is because when i put it in park it is not presing the button that says the car is in park and it's ok to take the key out ..so when i park i just push my shifter forward just a lil more and since then no problesm

-drew

mine just started doing it too... this cobalt is turning into a lemon... i still have to get my blower bearings replaced
Reply
Old Jan 2, 2007 | 08:51 AM
  #19  
cobaltssTH's Avatar
Senior Member
 
Joined: 08-13-06
Posts: 1,983
Likes: 0
From: cincinnati
if you pump the brake pedal the key will come out
Reply
Old Jan 8, 2007 | 09:07 PM
  #20  
zach ls/ss's Avatar
New Member
 
Joined: 07-05-06
Posts: 176
Likes: 0
From: Pittsburgh
had to get my whole shifter handle replaced also... working good ever since
Reply
Old Jan 8, 2007 | 11:15 PM
  #21  
Yikes12345's Avatar
Senior Member
 
Joined: 04-26-05
Posts: 905
Likes: 0
From: Pennsylvania
Same problem here. Took it in and they're ordering a new shifter for it. Very common problem so it seems.
Reply
Old Jan 14, 2007 | 11:09 PM
  #22  
kairi02's Avatar
New Member
 
Joined: 01-14-07
Posts: 1
Likes: 0
From: michigan
I've had the same problem. It started last month... my key would turn half way towards me and then it would stick and I couldn't pull it completely out. I though maybe there was a problem with the shifter not realizing it was in park. I brought it into the dealer and they ordered a part.. it took them a WEEK to fix it and when I got it back it was still doing it. I made another appointment at the same dealership to have them look at it again and they said there was nothing wrong with it !!! A month later and it is still continuing to stick. I found that if you shift the car in and out of park a few times it will eventually let the key come out. I have an appointment tomorrow at a different dealership so I decided to look up and see if this was just a freak kind of thing, but obviously many others are having the same problem! good to know !
Reply
Old Jan 14, 2007 | 11:24 PM
  #23  
curley b's Avatar
New Member
 
Joined: 11-27-06
Posts: 96
Likes: 0
From: whitehouse,tx
i had this problem too

Originally Posted by Cipher117
my car is in the shop currently but friggin key wont come out of the ignition (which has caused my battery to die) and i've been having off and on problems with the cruise control. sometimes it wants to work and then again, it acts like it has a mind of its on. before people try to flame me on the key part, theres three positions that the key can be in while in the ignition (i dont know the exact name of the positions so i'll just be simple about it). theres the position where you first put it in, then theres the position that says ACC i think and then theres the position where you would crank your engine up. its stuck in the ACC and wont let me turn the key towards me all the way so i can take it out. pissing me off to say the least. anyone else having problems like these?
they fixed it by replacing the shifter has something to do with the linkage
Reply
Old Jan 19, 2007 | 01:08 AM
  #24  
roccobladr's Avatar
Senior Member
 
Joined: 06-23-06
Posts: 2,160
Likes: 0
From: Broomall, PA
does this happen with automatics as well? i have an auto and i had the same problem.
Reply
Old Jan 19, 2007 | 01:23 AM
  #25  
theboy16's Avatar
New Member
 
Joined: 10-06-06
Posts: 89
Likes: 0
From: houston
my balt it did it for the last 2 months i had it, mine was an auto. it was a major pain in the ass, the easy way to get your key out is to put your car in park with your foot on the brake let off the brake and let your car move then apply the e-brake then try and take your key out

i noticed that mine did the most when i parked on a slope and doing this decreased the amount of time it did it by A LOT
Reply



All times are GMT -4. The time now is 11:01 PM.