Hi everyone,
I've been approached by a member for setting up a GB on FLOW MATCHED 60LB injectors and a tune to go along with it.

Depending on how many are interested I will work out a price.

1. Matty
2. Meatball
3. SSpartan
4.

Free bump , Mel helped me soo much with my 60's and 2.79 i recommend them to everyone :)

too bad i already have them

too bad i already have them

werent u haveing an issue with your tune Tag tunes are great good horse power no JSJ go BOOM !!!

im definately interested but a tune for a 2.6 ?????

i can vouche for good tunes from them:)

you should do a group buy for 60 lbers a 2.6 and a tune

you ready for cooling mods aswell?

Can I get in on the GB for the 60#'ers only?? I don't need a tune or anything

i could go just for a tune, lol

i could go just for a tune, lol

We'll split up the cost and I'll send you the tune ;)

hmmmmm, well see lol, i need to visit my buddy first

werent u haveing an issue with your tune Tag tunes are great good horse power no JSJ go BOOM !!!

actually we found out it was the 3 broken spark plugs in my car that was not letting the car get richer lol

I need 60s and a tune. sign me up

you ready for cooling mods aswell?

yeah all you need is a cobra heat exchanger , right?????????? I can find one for less than a 100 , or do you need the dual pass ic also , or meth injection

interested. i have something in the works but if it falls through i'd be in

with a 2.6 both mods would be great, but im noticing a trend where the dual pass works the best out of the 2, i will be installing the gm dual pass endplate (option B) at tag in the spring to compare temps, but with the heat a 2.6 generates, its good to have some supporting cooling mods before you start to get on her:)
if that isnt the route you wanna go check out tags water/meth kit, it drops intake temps and gives you an increase in power.

im interested.

what kind of price?
Am i going to have to send you my PCM for the tune?

Am i going to have to send you my PCM for the tune?

Nope. He sends it to you, you plug it in with HPTuners, datalog it, send that back to him and they tweak it (if needed) and send it back.

Price depends on how many are willing to go through with this (a bunch I hope :) )

i want a 2.6 pulley 60lbers and a tune tomorrow so im out

we can send you a 2.6" tune if you wish.

We prefer everyone to send their own PCM's in, this way we don't have to do the whole core charge thing and you don't have to go get harassed by the dealer to get a case learn.

But if you absolutely can't have any downtime we can send you one of our PCM's on a core exchange.

Can I get in on the GB for the 60#'ers only?? I don't need a tune or anything

yes you can

We prefer everyone to send their own PCM's in, this way we don't have to do the whole core charge thing and you don't have to go get harassed by the dealer to get a case learn.





yes you can

So you don't send the tune but need the PCM ? I was under the impression we could flash our own with HPT with a tune sent to us. Then a little back and forth tweaking.

I think as long as u have hpt they can send u the log file

I think as long as u have hpt they can send u the log file

Thats what I figured.:)
Thanks.

yeah they can send you the log file like you said matty they send it you see if you like it if not send it back and theyll fix it

yeah they can send you the log file like you said matty they send it you see if you like it if not send it back and theyll fix it

So are you in? They have a bunch of tunes in their data bank for various pulley sizes.

i wanna see the price , because i wanted to order my injectors and stuff tomorrow

I would also like a price for a 2.6 with the 60's if reasonable i'm down

Alert! Noob question...

So how would this whole process work... I really cannot have any down time, the cars my daily driver... So what would be my options...

Also what kind of gains would we see ontop of a 2.8" w/ a gm stage 2 tune.

Thanks,
Rich

I'm interested to know ho wmuch I'd be looking at to join the GB for just the injectors, PM me an estimate please :) Another member said they'd want the tune if you would split our purchase up

Mel, book me in for March 17...I'll bring the DD's - 60lb and tune for 2.7" -just like my hero, Mike :lol:

hahahahahaah^^
glad i can give you some inspiration.;P

hahahahahaah^^
glad i can give you some inspiration.;P

BTW...is $249.95 USD a good price for the GMPP Extrude Honed Manifold? Do I need to buy the gasket as well??

Thanks,
Ang

thats a good price ang.
get the gaskets for peace of mind, i did and I only had 5000km at the time.

I thought for sure there would be more interest in this. :(

There is, kinda. I REALLY want a good deal on the 60's w/ a harness :)

There is, kinda. I REALLY want a good deal on the 60's w/ a harness :)

Maybe if it were just a GB on the 60's there would be more guys interested?

Maybe if it were just a GB on the 60's there would be more guys interested?

Possibly. I know if I could get the 60's w/ harness for 200 shipped I'd take a loan out if I had to. Lightningperformance.com has them for 240 shipped w/ harness. Beat that and I'm in. Trying to support a vendor before going outside the forum

Possibly. I know if I could get the 60's w/ harness for 200 shipped I'd take a loan out if I had to. Lightningperformance.com has them for 240 shipped w/ harness. Beat that and I'm in. Trying to support a vendor before going outside the forum

I would be in for $200 shipped. That $240 is a great price. Are they Flowmatched?

Im interested, but I would like to know the total price for the 60's, 2.79" pulley, and the tune (can't send my pcm because its my daily driver).

very interested, but need tune for 2.7

Dont expect a pcm for months if ur not sending them one!!! Not trying to bash on TAG but i paid them mid january and they keep telling me they cant find an extra pcm!!! If you can send them a pcm then do that unless u want ur parts in may!!!!!!!!

Dont expect a pcm for months if ur not sending them one!!! Not trying to bash on TAG but i paid them mid january and they keep telling me they cant find an extra pcm!!! If you can send them a pcm then do that unless u want ur parts in may!!!!!!!!

It not easy finding PCM for these cars

you can throw me up on that list. i am planning on a tag racecraft tune and 60lbers and have been for awhile

I would be in for $200 shipped. That $240 is a great price. Are they Flowmatched?

Not 100% sure but I believe so. Any more info TAG??

It's a very nice tune but I would have to say it was more than conservitive, which I like.

New Era Performance has the 60lb injectors and harness for $199. Im not sure about shipping though. Here is the thread.

http://cobaltss.net/forums/showthread.php?t=44405