Hey MRZ,

I would love a sexy, one-piece billet bowtie for the front of my car. Anyone else? If so post, and let's show MRZ there is some interest :twothumbs

yea I would most deff do that..

yea I would most deff do that..

Hah looks like we're the only ones. Maybe I should have posted this in the Appearance forum, gotten some peeps on board and then suggested it to MRZ... lol.

I would buy one for sure :twothumbs

We will take your project into consideration and we had other members asking for the billet bowties so this would be something possible. As soon as we have some spare time(pretty rare right now) we'll take a closer look at it :cssNET:

Thank for your interest in our products and for submitting your idea :twothumbs

Bump for Billet! I would definately get one if you make them. I know alot of other people on here would as well.

Bump for Billet! I would definately get one if you make them. I know alot of other people on here would as well.

yep. I'm in.:twothumbs

^^Maybe we can push this along a little. Come on people! Sign on! We know you want these! :cssNET:

I love my CF bowties :)

Come on MRZ!!!!!! Do It Do It Do It!!!!!!!!!!!

that would b tight

I have no interest in this project and I would rather see MRZ spend there time making a few other projects first. :)

^^Thanks for the support! :blah:

^^Thanks for the support! :blah:

lol, anytime.

Sounds good to me ...!

I have no interest in this project and I would rather see MRZ spend there time making a few other projects first. :)

BTW, what kind of other stuff are you hoping for? :)

I'm in for billet bowties!

Actually I would like to see the park break lever. Now that would be sweet as the one in our cars is soooo bulky.

Actually I would like to see the park break lever. Now that would be sweet as the one in our cars is soooo bulky.

I was waiting for one but I decided to wrap my in carbon fiber instead.


BTW, what kind of other stuff are you hoping for? :)


I'm waiting for the brushed strut bar to come out although if they did a group buy on the polished version I'd be all over that. :) (hint hint)

I'd also like to see some really cool billet pedals. I have some Tenzo R pedals but the quality on this is sucky.

I was waiting for one but I decided to wrap my in carbon fiber instead.





I'm waiting for the brushed strut bar to come out although if they did a group buy on the polished version I'd be all over that. :) (hint hint)

I'd also like to see some really cool billet pedals. I have some Tenzo R pedals but the quality on this is sucky.

Pedals would be pretty sweet as well. I'd be up for both the bowtie and a set of pedals. :twothumbs

Any update on this becoming possible?

i would defenitly be interested in a billet bowtie. it would go great with all the billet items i am about to buy from them along with my billet grill i already have. Now i wish i had the guts to try and wrap my ebrake handle in CF.

Anodized Black would be sweet! Damn MRZ! You make me spend all my money LOL

ya im down for a polished one too, and if there the same ill take 2 for the front and back

I'm in.

no updates?

Bump for updates.

so whats the deal with the billet bow tie?? i've been waiting for one for a year and nothing has come around. update !?

anodized orange would be sweet

I'll probably just end up painting mine. A billet bowtie would probably end up being way too pricey to justify at this point.

lol the pt cruise pwnt the RSX the first run lol

lol the pt cruise pwnt the RSX the first run lol

Que?


http://cobaltss.net/gallery/files/4/0/7/6/bunny.gif (http://www.cobaltss.net/gallery/showimage.php?i=3071&c=searchresults&searchid=11275)

i want one now

I'm tired of waiting. im gonna have one made locally.

no to take business away from MRZ but have you guys checked out 24designs.net i got a billet one from them.

show me.

***************************/

on the third page of cobalt stuff there is a design your own badge link click that. you can have whatever you want.

no i wanna see yours

its in the mail when it gets here you can.

***************************/

on the third page of cobalt stuff there is a design your own badge link click that. you can have whatever you want.

I like some of those designs but I'll be patient and wait to see what MRZ comes up with. ;)

I like some of those designs but I'll be patient and wait to see what MRZ comes up with. ;)

You realize it's been over a year since this post was created right? I don't think MRZ has commented anymore on it since then...

i bought the billet bowtie withthe black SS emblem

You realize it's been over a year since this post was created right? I don't think MRZ has commented anymore on it since then...

Yes I know that but I'm not in any hurry. :) I did order the 2.4 ECOTEC badge though.

ooo.. if they came out with one that looked exactly like stock (3d) and i could have them engrave SS in it i would be down. The 24 desgins ones look sorta odd flat

ooo.. if they came out with one that looked exactly like stock (3d) and i could have them engrave SS in it i would be down. The 24 desgins ones look sorta odd flat

Thats what I thought too.

i bought taht ecotec 2.4 one too. its goin under my SS badge on the trunk

i bought taht ecotec 2.4 one too. its goin under my SS badge on the trunk

Same here :lol:

We are not going to produce th billet front bowties due to several reason, the most obvious would be the cost since this is a 3D piece and it would require a lot of machining and finishing to be perfect. We're sorry about it, I would have like to help you more with this situation but be sure we keep putting effort on making new stuff for the Cobalt owners ;)

so basically, you're not going to make anything worth a shit? Just fuse block covers and door sill plates?

so basically, you're not going to make anything worth a shit? Just fuse block covers and door sill plates?

:confused:

well that was settle lol

I don't think it needs to be Billet... but something to replace the stock piece of crap would be nice.

This is what mine looks like with the Gold Piece missing (it fell off)... it looks good, IMO. But up close... it looks like shit because of the crappy quality... and it's not made to be on top. That ugly Gold Bow-Tie is.

http://i138.photobucket.com/albums/q268/USMCFieldMP/PhotoShoots/20070905031.jpg

all the stuff mrz makes is really nice stuff.. our bow ties are kinda complex bein there not like the ones on the chevy trucks which are flat. basically what they are sayin is that it would take to much of an investment in man time and machine work to make it worth them selling..

so basically, you're not going to make anything worth a shit? Just fuse block covers and door sill plates?

What? :nono: :thumbsdow

Its just basic economics, thats all.

yeah its just not worth the money they would have to put in it. but to say they dont make anythin worth a shit isnt right cuz they make some of the best quality stuff you can buy. and some of its functions just as well as it looks (ie the strut tower brace).. btw thanks for the group buy on that mrz...

yeah its just not worth the money they would have to put in it. but to say they dont make anythin worth a shit isnt right cuz they make some of the best quality stuff you can buy. and some of its functions just as well as it looks (ie the strut tower brace).. btw thanks for the group buy on that mrz...

Agreed! Thanks MRZ. :)

so basically, you're not going to make anything worth a shit? Just fuse block covers and door sill plates?

stfu fool mrz stuff is the shit

who said it had to be 3d? i'd settle for a flat one like the ones on the trucks. in fact it would probably look better. Considering theres a billet bow tie made for a chevy truck that consumers obviously purchase since i see about a dozen of them a day, i fail to see how it wouldnt be "worth the money" to make one for a cobalt.

I guess thats just my opinion. If door sill plates, oil caps, and injector covers are working for you, then more power to ya.

who said it had to be 3d? i'd settle for a flat one like the ones on the trucks. in fact it would probably look better. Considering theres a billet bow tie made for a chevy truck that consumers obviously purchase since i see about a dozen of them a day, i fail to see how it wouldnt be "worth the money" to make one for a cobalt.

I guess thats just my opinion. If door sill plates, oil caps, and injector covers are working for you, then more power to ya.

He kinda has a point...wouldn't a "billet" bowtie pretty much work on any newer chevy with the gold bowtie(s)...?


Well, in review....maybe there aren't that many apps for a 3D (?) version....

the ones on the trucks are way bigger and they are flat.. they could make a flat one for the balt but flat just doesnt look as good as the 3d one..

it would look better than whats on it.

well ask for a flat one then. im pretty sure that they have thought everyone wanted one that was 3d like the orignal bowtie.

can you read? look at the post above don's.

well stat a new thread about it then. i dont think they even check this thread anymore after they said they wasnt gonna make one..