just got the mount in my car today. It is the front trans mount for the auto trannys and i just got it on my 2.2 ..... this is a prototype that scott from Cobalt Performance Parts sent me and let me say this thing is bad ass... i will post up more tomorrow i hope (launches and some good ole tire smoke maybe.... for now heres some pics.... notice the stock mount (black) has 2 rips in it, my car only has just under 23K on it and my mount was all torn up

 

Interested....

 

I was supposed to get the first prototype you noob!

 

also interested...how much to auto tranny mounts usually run?

 

Your prototype is going to be on its way soon hack. An extra mount (metal part) has been taking forever to get in.

 

may i ask the benifit for haveing this on a auto tranny?

 

Less engine/tranny movements. Power to the wheels quicker. The stock bushings are cracking in a lot of low mile cars. The stock bushings also seem to put odd pressure points on the stock housing and the housings have been known to fail.

 

Hey guys i have both the tranny bushings and TTR motor mount and i can personally say that if you want more power to the wheels the i recomend these you will deff notice a difference no more waiting for the the engine and tranny to roll back cause the power is instantly to the wheels you will be surprised

 

ugh it sux its all rainy out so it would be pointless to do launches itlll just break em loose, ill see if i can film anything but i g2 tell u i drove on the highway and city today, this thing is awseome lol...... given im on contenentals for now and it was a bit wet but i was screwing around with a grand prix today and i could do about 40, then mash it, and it would downshift and break the front end loose, never could do this before, i cant wait for more dry pavement

 

Good to here. I'm glad its working great for you. We have one more tester waiting for his mount. (Hackabuse) After we get that one out and tested we will begin to market the bushing.

 

im interested as well, would like to see some updates after dry weather

 

can u just buy the insert without the mount? what about the back mount?

 

If someone sends us a back mount we can start on that one as well. Otherwise we have to wait for our rear mounts to get here for testing.

 

Very nice Scott, keep up the great work.

 

Thank you for showing some love for us autos! I was starting to think that nobody would make the mounts for us.

 

ok thanks, what about just getting the poly inserts?

 

The plan is just to have the inserts. However with the current way it has to be done on a core charge basis.

 

This is great to hear because I have been waiting for this for months now. How long till they're available and what are they gonna cost. Oh and if you need another test car I'd be glad to do it

 

sorry i havent taken vids yet, shitty weather still

 

Ok the second test front mount is on its way out today. I am going to either overnight it to you hack or 2nd day air. We are doing the rear mounts as well. They should be out by late next week and out for testing.

 

ok vids should be done today, great weather and i calld off work what do you guys wanna see? launches?

 

A big burnout!!!

I did poly inserts on mine, noticed a huge difference in launching and shifting, also had the stock mounts starting to come apart with only about 25K miles. ******* GM with its cheap rubber.

 

vids r taken, and will be uploaded tomorrow and i will have a new thred({ i wanna do it all at once, pics, report, vids) look foward to it

 

I'm gonna beat you to it, Bio! haha

Mines being installed today at 3pm, and I will have a full review and probably some videos shortly thereafter

 

And the race begins lol. Thanks for testing these out guys. Im glad your taking your time to do the review process correctly.