Check out this oil filter (56k beware)
I just changed this filter(20,000 km at 5000 km intervals )and Just want to show this.
The filter was purchased from Napa and I left it with the parts supplier so they can give me a answer.
When I removed the oil filter cap it was not attached to it like it is normally and must of been spinning around in the reservoir.
What do you guys think, inferior product, or is are oil pressure that high .
The filter was purchased from Napa and I left it with the parts supplier so they can give me a answer.
When I removed the oil filter cap it was not attached to it like it is normally and must of been spinning around in the reservoir.
What do you guys think, inferior product, or is are oil pressure that high .
Last edited by Coblasts; Apr 27, 2007 at 05:53 PM. Reason: First photo post
I've been using Fram every oil change and I have never had a filter look like that. I havent' changed the oil every 3k miles either, I follow the oil life meter on the DIC, so I usually change it around 5-6k.
Have you changed your own oil !
Also there isnt enough room when inserted to put it in wrong,you would not be able to start the threads without the point and O-ring dropping in the proper spot.
I did it myself and the first few oil changes I used oem filters and this did not happen.
Last edited by Coblasts; Apr 28, 2007 at 05:09 PM.
Its easier to change if u ask me... less time and less mess. it took like 10 or 15 minutes to change my oil the first time i did it.
Thread
Thread Starter
Forum
Replies
Last Post



