I am buying some bulbs for them and was wondering how they come off. Or do I have to go from the inside.

 

for my fog lamps in the ss s/c front bumper you have to take them out from the inside. they kinda pop right in there. so in order to take them you u just have to pull them out.

but since ur only replacing the bulp i believe if u take your headlamps u can reach down and just unplug it then put the new light in. then plug and /or twist pack into place.

 

you can either go from under neath and remove the plastic molding form the bumper back to the wheel well, or you can take out the headlight the and the plastic brackets underneaht the head light and they are right their. i would take the headlights out its easier(4 bolts on each side ) and same size and you wont have to jack the car up... shoould take less then ten mins

 

Bought some H11 from jasonaudio yesterday (I live in mn, and he operates 30 min from my work) and I got home, took off my headlights and had it all done (taking bulbs out, putting new ones in, put headlights back in.) in about 10 minutes.

If you're talking about replacing the whole housing for the foggies, I have no idea!

 

i've never taken them out.. but a screw is plainly visible to me when I've washed the car, its right at the top of the fog light.. I'll bet thats the only one, and then some sort of clip on the inside.

 

Im buying the h11 fog lights from jasonaudio and was basically wondering whats involved. Im glad to hear that it will take only a few minutes.

 

If it is the screw you see when looking up and in the foglight why trying to get all the water out it is an allen screw for adjusting them.

 

Yeah just remove the headlight, reach down and twist, quick and easy.

 

i did one side from the headlight..the other from underneith cause i didn't feel like taking out the headlight, pretty easy tho..took me like 5 min