I Had an Idea if your going with the Twin Screw kit and are going to sell your stock blower then post up if you have one for sale.
This will help potential 2.4l supercharger swap guys out.

Please only post what you have for sale and what pulley's it has on it, and how many miles on it and of course it's condition.

anyone who needs an m62, ive got one with a 2.6 pulley, 3k miles on it. 330 OTD, anyone interested PM me

Moza Post has nothing to do with the topic Please remove!

Stock M62 for sale. Treated well. PM me eh

Great M62 for sale here. PM me as orignal buyer changed his mind. I would like to have it sold by August 15th.

$410 shipped with stock pulley!

I have a supercharger and 2.0 stock exhaust manifold.

Got an M62 Supercharger with stock pulley, belt and fuel inectors for a low price!!! PM me or post on here for any questions??? Thanks

Ok I would like to aquire a stock blower not ported, 3" (GM stage II) pullye, intake manifold, stage II injectors.......BUT I AM GOING TDY AND WILL NOT BE ABLE TO BUY IT TILL MID SEPTEMBER PLEASE PM ME YOUR PRICES FOR THESE ITEMS ONLY

subscribing

Those of you that have these items available..
Could you provide pics, prices, mileage on units availablity?

PM me with your quotes... thanks

Henry

I have a stock M62 off of my car. I am asking $850 shipped to your door. The only reason Im asking this high is as follows. To start the blower has at most 2k miles on it. I just put brand new supercharger rotors in the blower, I just put a Intense Racing coupler in it, new oil, new bearings, new grease, and of course the main reason is... the blower is ported. The snout is also machined and it comes with the intense hub and a 2.5 and 2.6 pulley!

I still have a stock pulley if needed and I will have the intake manifold for sale also!

Offers accepted!

M62 with original pulley / 26,xxx miles. Looks Brand new. No throttle body, nothing done to supercharger. $500 firm. Would swap with someone with brand spanking new clutch if possible or will take a set of halos and other trade. PM for details. Can ship ASAP, reliable seller.

-Mike

P.S I am not in any big hurry to move this. I was planning on using it eventually when I had funds to port/polish the unit to be put on my car.

Here are the pictures.

http://cobaltss.net/gallery/files/1/1/7/3/IMGA0536.JPG
http://cobaltss.net/gallery/files/1/1/7/3/IMGA0535.JPG
http://cobaltss.net/gallery/files/1/1/7/3/IMGA0534.JPG
http://cobaltss.net/gallery/files/1/1/7/3/IMGA0533.JPG
http://cobaltss.net/gallery/files/1/1/7/3/IMGA0532.JPG
http://cobaltss.net/gallery/files/1/1/7/3/IMGA0531.JPG

im in need of a stock supercharger with stock pulley on it....... anyone willing to take 450-500 shipped let me know i Need it ASAP cause im tryin to get warranty work on my car cause the trans blew and im short on money......

lesson learned dont let friends drive your car

Im also will be selling mine with:
intake manifold
supercharger (only 3000 miles on it)
Stock pulley
Injectors with stock harness
OE serp belt
Heat exchanger
intercooler pump
all hoses and clamps
OEM intake with filter housing

I will not be able to sell for 2 months. Its here as a feeler. Im going to use a custom intake manifold.

Just PM offers please.

chevy tech how much for intake manifold?

sorry i want to sell it as a whole.

thanks

Gotta sell mine within 2 weeks!
Stock pully or billetflow 2.9" never overspun... 30k

Twinscrew should be at my door next week...
PM offer

chevytech how much for everything?

Id like to get my hands on a supercharger, PM me, if anybody knows any other ideas cool, i can assume we could order them from a dealership or GM ? Expensive ?

i am interested in a supercharger for my 2.2. Anyone selling a used m62 supercharger that will fit on a 2007 2.2 if i get the 2.4 intake manifold swap. I am insterested in paying $300 for one with some low miles on it. Let me know.

Josh

anyone?

i am interested in a supercharger for my 2.2. Anyone selling a used m62 supercharger that will fit on a 2007 2.2 if i get the 2.4 intake manifold swap. I am insterested in paying $300 for one with some low miles on it. Let me know.

Josh

I dont think anyone will get rid of there m62 with low miles for only 300 bucks. and its the lsj manifold you need.

Ok guys, I have a few parts for sale.

Brand new Stage 2 pulley (bought it from J. Bika), stock ss/sc pulley,stock belt and stock gasket used for 12K miles belt - $40 shipped OBO.


Here's the thread
http://www.cobaltss.net/forums/showthread.php?t=73315

I just wanted to ask, if we have the 2.2 we can use these as well right? what all would we need?

I dont think anyone will get rid of there m62 with low miles for only 300 bucks. and its the lsj manifold you need.


okay. I have seen a few go for that before. I might not go supercharged on my car i might just build the motor and go nitrous.

I want to buy a stock m62 s/c and a stock ss s/c intake manifold

bump, my supercharger is still for sale. Low low miles, PM if interested. $400

looking to buy M62 w/ stock pulley, and LSJ intake manifold. Also want to buy pretty much anything else I need for supercharger swap. PM me, and let me know.

Anyone here still have a supercharger for sale?

I have a kit for sale, let me post the parts...

1800 OBO

Parts List
• Parts List:
• Eaton M62 Supercharger
• Supercharger Gasket
• Stock LSJ Intake Manifold
• Intake Manifold Bottom Mount
• Intake Manifold Gasket (Part #12597855)
• 2.5 Bar Map/Intake Temp Sensor (on upper left of LSJ manifold)
• 2.5 Bar Pigtail (Part #88988320)
• Bosch/LSJ Intercooler Pump
• Intercooler Pump Mounting Bracket (rebelautoworx.com)
• Cobra Heat Exchanger (Used from a 03 Mustang Cobra)
• Cobra Heat Exchanger Brackets (custom or bwoodyperformance.com)
• 42.5# Injectors (recommended)
• Injector Harness
• Wideband Air/Fuel Ratio Gauge (THIS IS NOT AN OPTIONAL ITEM!!!)
• Boost/Vacuum Gauge
• Stage 2 Belt (Part# 12597993; requires one rib be cut off)
• Custom Idler Pulley with Mounting Bracket (rebelautoworx.com)
• Extended Upper Radiator Hose
• Coolant Reservoir Tank (Cobalt or Ion Recommend)
• NGK Copper Spark Plugs (Part#)
• SS/SC intake
• 10ft. x ¾” I.D. Hose
• 10ft x ¼” I.D. Hose
• 4ft. x ½” I.D. Hose
• Small and Large Hose clamps.
• 3 x 1/8th NPT ¼” Barb Fittings
• Self Tapping Sheet Metal Screws (Mounting H/E brackets)
• 6M 25mm Bolts
• 6M 90mm Studs with Locking Nuts
• 8M 50mm Bolts
• Water Wetter Coolant
• 1/8th NPT Drill Tap
• 21/64th Drill bit (for the 1/8th tap)
• Zip Ties
• Electrical Tape
• Plastic Wiring Sleeves

wow that's the full beck kit, isn't it? i wish i had the money right now, save it for me for a month =]

First one to buy it, gets it, my buddy pulled all the parts, i got he list from beck himself :) Hes been giving me alot of pointers.

i got a few parts for sale... pm me for picks
could do combo deals
prices as stated or best offer
prices don't include shipping

ported blower with intense shaved snout for smaller pulleys about 8,000 miles semi polished 750$
GM hub 45$
stage 2 pulley 40$
stock pulley 40$
2.9 pulley 40$
lsj stock belt 40$
lsj stock injectors 4,000 miles 60$
lsj throttle body 50$
lsj stock intake tube and airbox with new filter 50$
lsj aem intake and filter with about 4 thousand miles on it 75$
http://i230.photobucket.com/albums/ee159/quadracer0387/IMG_0100.jpg

bah wunsick you're killing me haha you're not going to part it out, right? also, i dont see the lsj throttle body on hat list, does beck's setup work with the LE5 throttle body fine?

THat im not sure man, if that will work, but i doubt it, the 2.4L TB gets maxed out pretty quick. And no part out as of yet...

haha well dont part it out. if you keep it as a set, theres a better chance of you still having it in a month when i can afford it

^ YEah, plus a part out, ill have a better chance of making my money, and a better chance of the end user getting everything they need, so its a win win.

so, does that mena you are parting out? or keeping a kit? haha either way bump for a good deal

Yeah ill keep it as one full kit, unless absoltely nessisary. I got every part from a buddy who i absoltely trust with my life. He pulled em all for me. I was going to supercharge my 2.4L and see if i could eventually go twin screw or something next year, but i think im going LNF and going to start fabricating stuff.

i want like 1800 to 2000, I might put up its own thread if it gets parted out.

well you have a sale in a month or so, but im not asking you to hold it or anything

If you are around and have the cash, its yours.

cool thanks

Damn anybody still got their SC for Sale? PM if so with price shipped and pics if possible, thanks guys...

second anybody selling there s/c or the hole kit ????????

I'm selling SC with stock pulley or no pulley
http://www.cobaltss.net/forums/showthread.php?t=94259

2.9 intense pulley for sale still
ported M62 with stock intake, tb, stock pulley, rebuilt with new parts oil and grease
pm for details

subscribed. i want to look further into this

M62 for sale, 1000 miles on it, my old charger died and it was replaced under warranty when I got stage 2

Blower is 450, stage 2 kit 400, or buy them both for 750, shiiping is additional

anyone else selling a m62 supercharger, lsj manifold, pulley?

jsut the charger here

bringing this thread back.

selling m62 supercharger. 12,000 miles. in absolutely mint shape. asking 290USD+ shipping obo. it needs to go.

link:

http://www.cobaltss.net/forums/showthread.php?t=150859