2.2L L61 Performance Tech 16 valve 145 hp EcoTec with 155 lb-ft of torque

Dyno'd my auto. Thought I'd actually start a thread about it . lol

Thread Tools
 
Search this Thread
 
Old Aug 9, 2007 | 02:06 AM
  #1  
RedBaseBolt's Avatar
Thread Starter
Senior Member
 
Joined: 08-28-05
Posts: 2,862
Likes: 1
From: Oshawa, ONT
Dyno'd my auto. Thought I'd actually start a thread about it . lol

Well I don't have the chart scanned yet but I guess I'll finally make a thread about my dyno results. I made 129.9 whp and 132.5 wtq.

The car was dyno'd with all mods currently in my sig. Also it's an auto.

To stop all your comments right now. It isn't limited until 122mph for some reason. I didn't have any trouble dynoing it with the auto and I was very happy with the results.
Reply
Old Aug 9, 2007 | 01:18 PM
  #2  
Vin's Avatar
Vin
New Member
 
Joined: 01-27-07
Posts: 148
Likes: 0
From: New Brunswick, CANADA
Not bad I'd like to see the chart though.

You say your not limited to 122 MPH? Theres no limit?
Reply
Old Aug 9, 2007 | 01:22 PM
  #3  
OrngBalt's Avatar
Senior Member
 
Joined: 05-10-07
Posts: 5,890
Likes: 1
From: West Babylon, NY
No... he said he IS limited to 122... I am guessing you have the upper LT model then?
Reply
Old Aug 9, 2007 | 01:24 PM
  #4  
reed's Avatar
New Member
 
Joined: 01-14-07
Posts: 102
Likes: 0
From: Indiana
Originally Posted by RedBaseBolt
Well I don't have the chart scanned yet but I guess I'll finally make a thread about my dyno results. I made 129.9 whp and 132.5 wtq.

The car was dyno'd with all mods currently in my sig. Also it's an auto.

To stop all your comments right now. It isn't limited UNTIL 122mph for some reason. I didn't have any trouble dynoing it with the auto and I was very happy with the results.


Do you feel any lag with the 2.5" exhaust on it?
Reply
Old Aug 9, 2007 | 01:25 PM
  #5  
3fo893013L's Avatar
Banned
 
Joined: 03-30-05
Posts: 6,980
Likes: 0
so.... without those mods you were maybe 120whp?

what type of dyno?
Reply
Old Aug 9, 2007 | 01:26 PM
  #6  
wdsoccer's Avatar
Senior Member
 
Joined: 06-02-06
Posts: 10,510
Likes: 0
From: Corpus Christi, TX
nice numbers. i shold put a lil more down than that.

ur sig says driver mod. you dont need much of that with an auto. lol
Reply
Old Aug 9, 2007 | 01:28 PM
  #7  
SSCobalt~SSZ24's Avatar
Senior Member
 
Joined: 05-17-06
Posts: 2,418
Likes: 0
From: Columbus,Ohio
Originally Posted by wdsoccer
nice numbers. i shold put a lil more down than that.

ur sig says driver mod. you dont need much of that with an auto. lol
Reply
Old Aug 9, 2007 | 01:51 PM
  #8  
Vin's Avatar
Vin
New Member
 
Joined: 01-27-07
Posts: 148
Likes: 0
From: New Brunswick, CANADA
Originally Posted by OrngBalt
No... he said he IS limited to 122... I am guessing you have the upper LT model then?
Damn governor!
Reply
Old Aug 9, 2007 | 07:17 PM
  #9  
shawn672's Avatar
Senior Member
 
Joined: 05-07-07
Posts: 1,847
Likes: 0
From: Rochester, NY
i always thought driver mod meant the driver lost weight LOL
Reply
Old Aug 9, 2007 | 08:11 PM
  #10  
Schultzay's Avatar
Senior Member
 
Joined: 02-25-07
Posts: 817
Likes: 0
From: Portland, OR
Originally Posted by shawn672
i always thought driver mod meant the driver lost weight LOL
lol in that case i have driver mod lol i'm only about 150 lbs
Reply
Old Aug 9, 2007 | 08:16 PM
  #11  
g5mike's Avatar
Senior Member
 
Joined: 03-17-06
Posts: 17,268
Likes: 0
From: Moncton Newbrunswick Can.
Originally Posted by Schultzay
lol in that case i have driver mod lol i'm only about 150 lbs
must be nice, no driver mod for me,Im a plump 200.LOL!!!
Reply
Old Aug 9, 2007 | 08:20 PM
  #12  
Schultzay's Avatar
Senior Member
 
Joined: 02-25-07
Posts: 817
Likes: 0
From: Portland, OR
lol i always swore my car was faster than everyone says the 2.4s are and now i know why haha
Reply
Old Aug 9, 2007 | 09:05 PM
  #13  
th0ughtless's Avatar
Member
 
Joined: 07-28-07
Posts: 213
Likes: 0
From: Houston, TX
MUAHAHAHA, I got you all beat! 140!
Reply
Old Aug 9, 2007 | 09:12 PM
  #14  
HackAbuse's Avatar
Senior Member
 
Joined: 11-16-05
Posts: 11,137
Likes: 1
From: Central NY
Originally Posted by RedBaseBolt
Well I don't have the chart scanned yet but I guess I'll finally make a thread about my dyno results. I made 129.9 whp and 132.5 wtq.

The car was dyno'd with all mods currently in my sig. Also it's an auto.

To stop all your comments right now. It isn't limited until 122mph for some reason. I didn't have any trouble dynoing it with the auto and I was very happy with the results.
122? are you sure?

CarandDriver had their Auto 2.2 up to 124, and I personally have seen 126.

Also, how did you keep your car in a single gear to dyno?

Last edited by HackAbuse; Aug 9, 2007 at 09:12 PM. Reason: Automerged Doublepost
Reply
Old Aug 9, 2007 | 09:35 PM
  #15  
HunterKiller89's Avatar
Senior Member
iTrader: (1)
 
Joined: 07-20-06
Posts: 11,183
Likes: 4
From: Los Angeles
you can keep it in 2nd by putting it in "I", or 1st with "L", though i cant imagine 1st is a good dyno gear, and even 2ndisnt optimal....
Reply
Old Aug 9, 2007 | 09:36 PM
  #16  
HackAbuse's Avatar
Senior Member
 
Joined: 11-16-05
Posts: 11,137
Likes: 1
From: Central NY
Originally Posted by HunterKiller89
you can keep it in 2nd by putting it in "I", or 1st with "L", though i cant imagine 1st is a good dyno gear, and even 2ndisnt optimal....
3rd is best. it's a perfect 1:1 ratio
Reply
Old Aug 9, 2007 | 10:24 PM
  #17  
cobalt9123's Avatar
Senior Member
 
Joined: 05-22-07
Posts: 1,271
Likes: 0
From: Winder, GA
jeez..130 seems low to me with all those mods you have...
Reply
Old Aug 9, 2007 | 10:29 PM
  #18  
RedBaseBolt's Avatar
Thread Starter
Senior Member
 
Joined: 08-28-05
Posts: 2,862
Likes: 1
From: Oshawa, ONT
It was done in third, the guy just held it in 2nd and then hammered it and shifted so the car went to third and stayed there until 122 mph approx. I only say 122 because I've personally had the car up to 198 km/h but I have no idea how fast that is in mph.. I'm thinking 122 is close though.

And driver mod in my case means I'm only 140 lbs and I know how to properly launch an auto unlike most stomp and go drivers out there.

Originally Posted by cobalt9123
jeez..130 seems low to me with all those mods you have...
It's auto... and over 120,000 kms...

Last edited by RedBaseBolt; Aug 9, 2007 at 10:29 PM. Reason: Automerged Doublepost
Reply
Old Aug 9, 2007 | 10:34 PM
  #19  
monkeiboy's Avatar
Senior Member
 
Joined: 11-30-06
Posts: 3,505
Likes: 0
From: West Memphis, AR
"L" is first and second gear with no traction control
"I" is first, second, and third with traction control
"D" is first second, third, and the overdrive gear.

"I" is probably your best bet for Dyno. 3rd Gear would put down your highest numbers.
Reply
Old Aug 9, 2007 | 10:43 PM
  #20  
VeNoM0713's Avatar
Senior Member
iTrader: (1)
 
Joined: 06-09-05
Posts: 2,136
Likes: 0
From: Buffalo, NY
Originally Posted by RedBaseBolt
It was done in third, the guy just held it in 2nd and then hammered it and shifted so the car went to third and stayed there until 122 mph approx. I only say 122 because I've personally had the car up to 198 km/h but I have no idea how fast that is in mph.. I'm thinking 122 is close though.

And driver mod in my case means I'm only 140 lbs and I know how to properly launch an auto unlike most stomp and go drivers out there.



It's auto... and over 120,000 kms...
how do you properly launch an auto? im one of those stomp and go drivers lol.. but im really interested what the right way of doing it is.
Reply
Old Aug 9, 2007 | 10:48 PM
  #21  
RedBaseBolt's Avatar
Thread Starter
Senior Member
 
Joined: 08-28-05
Posts: 2,862
Likes: 1
From: Oshawa, ONT
Originally Posted by VeNoM0713
how do you properly launch an auto? im one of those stomp and go drivers lol.. but im really interested what the right way of doing it is.
Brake Stand it. You hold one foot on the brake, the other on the gas, press the brake all way down press gas and release brake asap before you burn out your tranny. 1 second = 100+ degrees in the tranny or so. you gotta be quick.
Reply
Old Aug 9, 2007 | 11:16 PM
  #22  
HackAbuse's Avatar
Senior Member
 
Joined: 11-16-05
Posts: 11,137
Likes: 1
From: Central NY
Originally Posted by RedBaseBolt
It was done in third, the guy just held it in 2nd and then hammered it and shifted so the car went to third and stayed there until 122 mph approx. I only say 122 because I've personally had the car up to 198 km/h but I have no idea how fast that is in mph.. I'm thinking 122 is close though.

And driver mod in my case means I'm only 140 lbs and I know how to properly launch an auto unlike most stomp and go drivers out there.



It's auto... and over 120,000 kms...

In that case, I have an auto, I weigh 107 lbs, and I know how to launch pretty well, so I guess i have uber-driver mod!
Reply
Old Aug 10, 2007 | 12:15 AM
  #23  
RedBaseBolt's Avatar
Thread Starter
Senior Member
 
Joined: 08-28-05
Posts: 2,862
Likes: 1
From: Oshawa, ONT
Originally Posted by HackAbuse
In that case, I have an auto, I weigh 107 lbs, and I know how to launch pretty well, so I guess i have uber-driver mod!
Whats your best 1/4 Hack?
Reply
Old Jan 8, 2008 | 07:57 PM
  #24  
YSUsteven's Avatar
Senior Member
 
Joined: 07-19-06
Posts: 1,381
Likes: 0
From: North Carlonia
Originally Posted by RedBaseBolt
It was done in third, the guy just held it in 2nd and then hammered it and shifted so the car went to third and stayed there until 122 mph approx. I only say 122 because I've personally had the car up to 198 km/h but I have no idea how fast that is in mph.. I'm thinking 122 is close though.

And driver mod in my case means I'm only 140 lbs and I know how to properly launch an auto unlike most stomp and go drivers out there.



It's auto... and over 120,000 kms...
198kph is 123 mph, or if your interested, 106 knots
Reply
Old Jan 8, 2008 | 08:02 PM
  #25  
XM15's Avatar
Senior Member
 
Joined: 05-16-06
Posts: 6,298
Likes: 0
From: CT
106 Knots
Reply



All times are GMT -4. The time now is 10:19 AM.