let me know, this was at the track last weekend. I was running one of 06blackG85ss tunes for my car. first little bit is the burnout, then you can see where the run commences. I dont understand why im only getting 88% at the TPS when my foot is buried in the floorboard

http://i24.photobucket.com/albums/c37/hatrickstu/11-2.jpg

mods are GMPP stage 2, GMPP manifold, full 2.5 catless exhaust, K&N intake. this was my new street tire PB run, 11.28 in the 1000

i'll send you a config file that i use.

i'll send you a config file that i use.

ok, 06black tried to do that yesterday but my car wouldnt log the run, maybe because his is an 06 and mine is an 05?

ok, 06black tried to do that yesterday but my car wouldnt log the run, maybe because his is an 06 and mine is an 05?

doesn't matter, you just have to let it load up the parameters. i have used mine on, well my car, and 06's

When 06blackG85ss did my tune my foot was to the floor and it would say that sometimes.

I can't tell where your KR is. Do you know if you were getting any knock?

doesn't matter, you just have to let it load up the parameters. i have used mine on, well my car, and 06's

hm ok, will i be able to load this data file under your config, or will i need to make another pull?

you has mail

When 06blackG85ss did my tune my foot was to the floor and it would say that sometimes.

I can't tell where your KR is. Do you know if you were getting any knock?

dont know, im assuming one of his or area's configs will have that in there

you will have to do another pull to get all of it to read. no biggie, you can load it, and it might or might not show up the whole thing

you has mail

sorry man as much as id love to look at it right now im on a school computer so i cant do anything with it. i will reply asap

read on hptuners forum. theres a description there.

normal throttle position sensor reads 0-5v
but apparently GM used 0-4.6 volts.

your throttle is wide open, its just a misreading on the part of HPtuners.

you will have to do another pull to get all of it to read. no biggie, you can load it, and it might or might not show up the whole thing

well damn, its pouring here so i wont be able to get a pull in. im also taking my car into the shop today for who knows how long because they messed up on some body repairs....

if i cant get it logged today or in the next couple days i will get it ASAP and i really appreciate your and 06's help

read on hptuners forum. theres a description there.

normal throttle position sensor reads 0-5v
but apparently GM used 0-4.6 volts.

your throttle is wide open, its just a misreading on the part of HPtuners.

makes sense, i figured it was something along those lines

ill dig up the link so im not paraphrasing. 1 sec

http://www.hptuners.com/forum/showpost.php?p=32069&postcount=2

there ya go

ill dig up the link so im not paraphrasing. 1 sec

http://www.hptuners.com/forum/showpost.php?p=32069&postcount=2

there ya go

thanks man

not a problem stu. we are here to help. to a degree
:D

not a problem stu. we are here to help. to a degree
:D

hey, I JUST WANNA GO FAST!

The ETC is what you wanna read for throttle position. I have mine set to read ETC and it reads 100% at WOT.

hey, I JUST WANNA GO FAST!

if you had an 07, i could send you a retarded map that requires 110 octane to run
:D

yeah I sent him the right config file, he just needs to relog it then send it onn back to me
`

Looks good from what I can see, but my eyes are really straining to tell what the hell is going on!

thanks guys, and again big thanks to 06blackg85ss and area47

thanks guys, and again big thanks to 06blackg85ss and area47

not a problem d00d

Area47 has been a big help with me and my car! So Props to my boy Area!

06black your the shit too man!