Hey Ark..i've seen some Pulley you made for the Tiburon's..

Want to know if you guys could make a lighter ones for our cars..?

also the short shift if its posible

Thanks
r0k0

Hey Ark..i've seen some Pulley you made for the Tiburon's..

Want to know if you guys could make a lighter ones for our cars..?

also the short shift if its posible

Thanks
r0k0

YES. We do.

But As per our reseach, Cobalt is very sensitive with harmonic balance. We're doing some reseach about pulley setting with cobalt.

And also, Short shifter under development. The ARK Strut Bar coming soon. :twothumbs

Ohh Nice.. Then i guess i'll be waiting for the Strut bar.. and the short shift also :D

Ohh Nice.. Then i guess i'll be waiting for the Strut bar.. and the short shift also :D

hahha... COOL !! :twothumbs

Any news about the strut bar?

Any news about the strut bar?

We're currently working on Coilover system , STS, Lowering Spring. Developing takes time... :cssNET:

Strut Bar almost done.:guns:

i was under the impression the cobalts crank pulley was not a harmonic balancer pulley?

it is a balancer in away

the pulley will give us the juice taken away by the SC.. so making it easier to get in RPM..! :)

Cant wait for this beauty to come out tho.. haha

i had one won on ebay but the damn guy aint responding on sending me the shipping amount..

oh well..

though luck dude XD

Cant wait for that Lowering Kit...!

and strut bar.. just gotta find a way for money to come in still for the DT-S... :(

We're currently working on Coilover system , STS, Lowering Spring. Developing takes time... :cssNET:

Strut Bar almost done.:guns:

how about a 3" N2 exhaust for us balts.............. for those who need something bigger than 2.5" but dont like the look of the only three 3" exhaust out

jbp makes a lightweight crank pulley for our cars

yeah for almost 200$..

Can any one donate Crank pulley? later we can send you Lightweight pulley for exchange.
Does anyone work on Chevy dealer?

yeah for almost 200$..


no one seems to have a problem throwing that out for an intake..... not trying to argue just saying

jbp makes a lightweight crank pulley for our cars

do you have link?

do you have link?

x2. ive been toying with the idea of changing these out to a lightweight one

http://www.cobaltss.net/forums/showthread.php?t=78239

I was supposed to be a test vehicle but they didnt accept anything accept international money orders which seems to be a shortage of in new england, or a wire transfer that even my bank was having problems with. I gave up. I could still buy it off their website but being in canada and whatnot id just rather get it done thru the states. Nothing against them they still make great products and whatnot just seemed like alot of hurdles that werent needed...

Can any one quote me OE part number? We're going to do this project.

i'll go ask later at my dealer for the part number

wait a minute. lol. this would be only for the lsj's?? or all model cobalts?

jbp makes a lightweight crank pulley for our cars

So does Z-spec.

ati also makes one

can you guys post link ? and those Crank pulley lightweight or UD crank?

lightweight

JBP Pulley
http://www.jbodyperformance.com/new/PartDetails.php?partId=706&catId=706&catName=JP0706

JBP Pulley
http://www.jbodyperformance.com/new/PartDetails.php?partId=706&catId=706&catName=JP0706

That ones only for the LSJ though. The Z-spec one fits the 2.2's and 2.4's.

JBP Pulley
http://www.jbodyperformance.com/new/PartDetails.php?partId=706&catId=706&catName=JP0706

The problem that everyone over looks is that that pulley is ONLY a pulley. The factory crank pulley is also a harmonic dampener. Its job is to absorb HARMFUL frequencies produced by the rotating assembly. Installing just a pulley in its place can and will lead to significantly shorter bearing and crankshaft life.

Heres the Z-Spec. Not alot of details, and its only $40........hmmm....

http://www.z-spec.com/catalog.htm

can you guys post link ? and those Crank pulley lightweight or UD crank?



here is a link...but I don't like that price:thumbsdow:thumbsdow
http://http://www.crateenginedepot.com/store/Balancers-and-Pulleys-C135.aspx

http://www.z-spec.com/catalog.htm

dont know about quality but it looks pretty:-D

here is a link...but I don't like that price:thumbsdow:thumbsdow
http://http://www.crateenginedepot.com/store/Balancers-and-Pulleys-C135.aspx

Link didn't work but here it is

http://www.crateenginedepot.com/store/Ecotec-Billet-Crankshaft-Pulley-88958631-P330C135.aspx

The problem that everyone over looks is that that pulley is ONLY a pulley. The factory crank pulley is also a harmonic dampener. Its job is to absorb HARMFUL frequencies produced by the rotating assembly. Installing just a pulley in its place can and will lead to significantly shorter bearing and crankshaft life.

Heres the Z-Spec. Not alot of details, and its only $40........hmmm....

Again the Z- spec is just a pulley

Heres the Z-Spec. Not alot of details, and its only $40........hmmm....

http://www.z-spec.com/catalog.htm

What does Z-spec mean?

40.00 for Crank pulley? is that correct item? other link shown 300 ~ 600.00 ?

getting confuse...

Heres the Z-Spec. Not alot of details, and its only $40........hmmm....

http://www.z-spec.com/catalog.htm

Wow, thats a great site if you want to submit your order info, cc, exp date, and cv number over the clear in text.


Zspec = RSM

Sorry to bump a year+ old post but I'm curious as to what if anything is going on with the pulley.