NEW!! CHEVY COBALT 2dr GRAPHICS STRIPES YENKO STYLE

https://www.revolution-motorsports.com/photos/CobaltYENKOSTYLE-2.jpg

With each graphics package you order, you'll receive the following:

driver's side graphic
passenger's side graphic
detailed installation instructions
installation squeegee

Much thought is given to the installation process when designing our graphics. Therefore, when following our detailed instructions, you'll find that installing your new graphics will be a quick and simple process. The only tools you'll need will be a tape measure, some masking tape, and a new single-edged razor blade (for trimming the graphic at the door edges).

https://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=CobaltYENKOSTYLE

I can custom make these any color and any logo you like in them. Just pm me!!

Thanks

neat..do u think its possible to replace the chevy symbol at the end of the cobalt with a "SS"?

neat..do u think its possible to replace the chevy symbol at the end of the cobalt with a "SS"?

Yes sir, no problem.

If you would like you can order the on our our site them pm me your info and I will custom make yours.

We don't have a notes section yet on our site.

Thanks

:lol: love that it's shown on a G5...

Anywho, looks good. I think it would look better if it was raised to the actual upper curve (above the handle) and the end, instead of being on top of the line, put it under.

:lol: love that it's show on a G5...

Well you get the picture....;)

good stuff revo.

on my car, i have two 8.75" racing stripes going down the middle. what do you think i could put on the side that would flow with that??

:lol: love that it's shown on a G5...

Anywho, looks good. I think it would look better if it was raised to the actual upper curve (above the handle) and the end, instead of being on top of the line, put it under.

I can fill that little piece for the handel cutout then you can install it wherever you like. Higher Lower etc.

Just an idea.:)

good stuff revo.

on my car, i have two 8.75" racing stripes going down the middle. what do you think i could put on the side that would flow with that??

^^^^^^

good stuff revo.

on my car, i have two 8.75" racing stripes going down the middle. what do you think i could put on the side that would flow with that??

As long as we stick with the Gloss black we can do anything you want. I would stick with a strip kit of some kit. No tribal or flames with the rally stripes.

Mabe a made to fit one of these kits we have for the SRT-4

http://www.revolution-motorsports.com/photos/SRT-4111Stripe-2.jpg

http://www.revolution-motorsports.com/photos/Dodge%20SRT-4102Stripes-2.jpg

As long as we stick with the Gloss black we can do anything you want. I would stick with a strip kit of some kit. No tribal or flames with the rally stripes.

Mabe a made to fit one of these kits we have for the SRT-4

http://www.revolution-motorsports.com/photos/SRT-4111Stripe-2.jpg

http://www.revolution-motorsports.com/photos/Dodge%20SRT-4102Stripes-2.jpg

now that is a kit i would buy... hint hint....

Can i get this kit in a flat black?

http://www.revolution-motorsports.com/photos/SRT-4111Stripe-2.jpg

Can i get this kit in a flat black?

http://www.revolution-motorsports.com/photos/SRT-4111Stripe-2.jpg

Yes sir you can. I will make you a button for them right now. That is our #111 kit give me a second or two.........

Can i get this kit in a flat black?

http://www.revolution-motorsports.com/photos/SRT-4111Stripe-2.jpg

Here is the link. I will re-size these to fit the Cobalt.

https://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=CVCBT%23111

If you send me a pic I will send you a Free window decal or Eyelids....

Sound good?

now that is a kit i would buy... hint hint....

Same for you my friend, did you want the #111 or the other #102?

Humm, I'm not a big fan of this double post merge thing.....

wow it keeps on doing it no matter what I say..........................

I can make any of these kits Say G5 instead of Cobalt also just pm me!!

I added a G5 Option for you guys.....

http://www.revolution-motorsports.com/photos/CobaltYENKOSTYLE-3.jpg?455.7399

Select kit #2 for this one.

that's not bad looking at all. i'm generally not into vinyl, but that's sharp

Could you make the Grand Sport fender stripes(red) like these? .....

http://cobaltss.net/gallery/files/1/4/7/9/9/S6300601.JPG
Thanks to redecotecss for the pic.....

Sure, I believe the ones on Corvettes are 3.5 with 1" space. Those look 4" to 5" with about 1/4" space

I could do them...say $25 shipped

Let me know

Here is a pic of some Vett ones from one of my partners

http://www.autotrimdesign.net/servlet/com.beantree.catalog.GalleryImageRetrieveServlet?i mageId=40158

yeah, they are. they're between 4 and 5" with 1/4" of space. good call, Revo..

Revo, did I hear something about free window decals or eyelids? :) lol. I'm a sucker for free shit.

Also, do you do any sponsoring? I'm a big fan of vinyl decals (call me ricey... idc). I'd be glad to advertise for you and everything.

yeah, they are. they're between 4 and 5" with 1/4" of space. good call, Revo..

Revo, did I hear something about free window decals or eyelids? :) lol. I'm a sucker for free shit.

Also, do you do any sponsoring? I'm a big fan of vinyl decals (call me ricey... idc). I'd be glad to advertise for you and everything.

I think I will do that on this site....Any New kit that I do not have a pic for I will send you a free windshield decal or eyelids.

Now if I have a pic already that will not work for.

What do you think?

Sounds like a good plan to me. It'll really get customers trying to come up with new stuff for you. Haha. It's a good thing though.

Did you say if you had any advertising/sponsorship positions available? Check out my previous post. :thumb:

Sounds like a good plan to me. It'll really get customers trying to come up with new stuff for you. Haha. It's a good thing though.

Did you say if you had any advertising/sponsorship positions available? Check out my previous post. :thumb:

Pm sent

You should just sell the vette ones I like those ......I checked the out on you partners site. PM me and we'll work something out.....

just posting now to come back later to see the site

I will put up the Vett one now but list them for the cobalt............

Here you go that kit listed for the cobalt

https://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=ATD%2DCHVCRVTGRPH1

NEW!! CHEVY COBALT 2dr GRAPHICS STRIPES YENKO STYLE

https://www.revolution-motorsports.com/photos/CobaltYENKOSTYLE-2.jpg

With each graphics package you order, you'll receive the following:

driver's side graphic
passenger's side graphic
detailed installation instructions
installation squeegee

Much thought is given to the installation process when designing our graphics. Therefore, when following our detailed instructions, you'll find that installing your new graphics will be a quick and simple process. The only tools you'll need will be a tape measure, some masking tape, and a new single-edged razor blade (for trimming the graphic at the door edges).

https://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=CobaltYENKOSTYLE

I can custom make these any color and any logo you like in them. Just pm me!!

Thanks

now just a fyi, the picture u have their isnt a cobalt, its a G5, hence the rear taillights. ;);););) but i like how u tried to make it look like a cobalt with different rims. almost had me for a sec :twothumbs:twothumbs:twothumbs:twothumbs better luck next time.

yep...I tried. That was the best side pic I had.

well if u wanna "redo" that on a REAL cobalt then let me know. send me the decal and we can work something out. im located in 48360 lake orion, michigan so let me know.

well if u wanna "redo" that on a REAL cobalt then let me know. send me the decal and we can work something out. im located in 48360 lake orion, michigan so let me know.

I tried to pm you but your box is full.

On a REAL Cobalt? Whats the difference between the G5 body and the Cobalt body? Not much. Maybe the rear taillights and front grill? As far as the sides go, nothing..

I tried to pm you but your box is full.

my apologies. box was full from PM's about the Cobaltss.net Calender that im in as well (month October ftw). box has space

November is better. :)

http://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=ATD%2DPNTG5GRPH1

if you could change it to cobalt. i think it would look sick

PM Sent!

http://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=ATD%2DPNTG5GRPH1

if you could change it to cobalt. i think it would look sick

Done, if you want it just order the reg kit and I will cutom make yours for you.:)

http://www.revolution-motorsports.com/ProductDetails.asp?ProductCode=ATD%2DPNTG5GRPH1

if you could change it to cobalt. i think it would look sick

Replied!!

Needs the hood stripes IMO and you'd have a winner on your hands.

Needs the hood stripes IMO and you'd have a winner on your hands.

What ever you need just let me know...

Bump on these....trying to revive out Coblat graphics for the new year!!!!

Any input??????

Bump bump on this kit, put in the code 10forum and get an extra 10% off