Im thinking it has to do with the wiring heres the deal

When i throw the fogs on the passenger one comes on and the driver maybe 80% of the time wont. In that case i go outside the car and i lightly hit my bumper cover and it comes on. Sometimes it doesnt then that means i go into my bottom grill open the little thingy in there and reach for the wire and wiggle it and it comes on.

I have Luminics JDM Yellow Bulbs, how do i fix this.

Let me add something, when i changed the bulbs once before the inside of the harness was burnt on one of the prongs on the bulbs.

Help guys thanks!!!

i have the same problem....

oo so im not the only person, thank god!!! did you fix it? i really dont wanna take it to the stealership, first of all it cant!!!!

i find that if i push the bulb in it works...and then it loosens and wont work anymore...ive had it like this for a while as im too lazy to fix it right now lol....did you hit a pothole by chance? thats what i did lol

i dont even have mine in. hell the filter is right behind it

It has to be a wiring problem, I have that same thing, but with my DRL's (turn signals). Every so often the bulb will stop working, and one of the prongs will be burnt, and the plastic on the bulb melted. I have a bag of at least 10 bulbs that have been blown.

i had those luminics bulbs. they have a higher wattage than stock. it burnt up my passenger side harness for the fog. it wont even work with the stock bulb

oo dam, i knew they were higher wattage than stock, how would HID's be in them fogs? i might throw a cheap set in the fogs but 3000K

If its a problem with the wattage of the bulb they make adapters to go between the bulb and harness so you dont burn up your stock harness. Just a thought:twothumbs

nah imma just take em out and i guess do something with em, and get that set of HID's

i found out the problem, the old Nokya Artic Whites i had in before the JDM yellows melted the plastic on the plastic and it burnt the metal inisde the harness to connect to the fog light, well i pulled the jdm yellow one out just now and noticed practically the whole plastic harness was gone and finished and all the metal is burnt and done, i left the headlights out and left the fog lights in so imma try and find a new fog light harness and put HID's instead with a lower wattade draw, and also the passenger side one is perfectly fine.

Same situation i'm in on driver's side as well. check for moisture in the harness also.

yeah did it had some, where can i get a new harness? i searched ebay and gmpartsdirect and cant find nothing, these things cant be that much money and i dont feel like bringing the car to the dealer