G'day ...

I need some help.
I have been making some design changes to further improve the intake flow to our new HTV1320 (TVS-based) supercharger, however I need some images of the standard Eaton M62 as factory-installed. I have browsed the image gallery and can find lots of pix when viewed from the top, however I need to know what is under the "intake snout" of the M62 ... the area between the throttle-body-flange and the bypass-port.
Keep in mind that we do not have the Cobalt in Aussie ... I am working entirely from GM CAD data which does not necessarily show everything.

Specifically ... I am contemplating moving the bypass actuator to the opposite side of the snout (to the front of the engine), and also moving the shaft downwards ~8mm. Some of the images show a bracket attached to the supercharger that appears to hold a coolant filler/hose ... ???? Can this filler/hose be moved/flexed forward at all, and if so, how much?
What is "under" the snout - the are between the bypass port and the throttle body?

I would be very grateful if some photos of the area can be emailed to me (ken@harrop.com.au). The more shots the better ... especially if they are from various angles and indicate any space/options available.

Cheers ... Ken.

 

these are the best i got for now

 

Thanks ... But I really meant on the outside, as fiited to the car. (I have the supercharger, but not the car).
I need to know if there is anything (wires/pipes/brackets etc) "under" the supercharger inlet.
Whats under here ...
https://www.cobaltss.net/gallery/sho...hp?i=27663&c=3

 

Nothing is there as far as I know. Just space under the blower.

 

****, somebody get on this! We need to help him out as much as possible!

I want that TVS/HTV charger...

 

that coolant filler/hose is for the Water to air intercooler fill. Also right behind and lower than the supercharger is the oil filter housing (the ecotec has a cartridge filter as i'm sure you know) also there is a few coolant lines down there for the intercooler.. i suppose i could try to take pictures later

 

the coolant filler has about a 3 inch radius before a line gets kinked somewhere in the system.

there is nothing but open space under the blower inlet.

 

Also the connectors for the Throttle body live in that area. The coolant filler neck can be moved quite a bit forward when unbolted. As a potential customer of this new blower I would please ask you not to put anything underneath of that area as it will make changing the oil in these things harder if not impossible without removing the supercharger.

 

bump?

 

I have stage 3 so no intercooler viewfinder there anymore

 

Shitty cell phone pic (sorry) but this is all I have. Hope it helps.

 

i know this is an old thread, but here's some more pics to help out if you need them

 

Those are great images ... Thanks.
I have all we need now.

Cheers ...