The Billet Seat Brace is a new innovative part that will look amazing in your Cobalt! :cssNET:

The MRZ Performance seat braces are made out of High Strength 6061 T6 Billet Aluminum. They are CNC machined and hand brushed or polished to a mirror finish, you can get them in the finish of your choice. The unique design of this new part is made to fit perfectly on the headrest of your Chevrolet Cobalt or Pontiac G5. The seat brace is a 100% safe and will not affect any safety feature of your car. Easy to install in a minute, remove headrest, insert the MRZ Billet Seat Brace and put headrest back on seat, you're done!

Those billet seat braces are real eye catchers in car shows, these are perfect items to have a custom emblem engraved. You can have them with many different engravings (OEM emblems, MRZ emblem and custom emblems) or simply leave them plain. We can also anodize them in various colors.

The billet seat braces come in pair to fit both front seats. Approximate size is 1 1/2" x 1/2" x 6".

http://mrzperformance.vstore.ca/product_info.php/cPath/23_24_29/products_id/114

http://mrzperformance.vstore.ca/product_info.php/cPath/23_24_29/products_id/115


If you have any questions, feel free to email us at sales@mrzperformance.com :twothumbs


Brushed with the SS emblem:

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_SS.JPG

Polished with the SUPSERCHARGED emblem:

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_Supercharged.JPG

Here it is installed in a Cobalt SS coupe 2.4

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_SS__Installed.JPG.JPG

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_Supercharged__Installed.JPG

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_SS__Installed2.JPG

Thanks for looking and Happy Holidays to all of you!

Also check our new website at www.mrzperformance.com not fully completed but will be soon! ;)

wow thats actually a neat idea.

group buy? lol..

threads merged. no need for duplicate threads.

group buy can be made if we have enough interest ;)

Thanks for the comments!

Sexy!!!

??? another thread ???

they only question i really have with these is do they touch the back of ur neck at all? in wisconsin when its 10*F outside cold alum on ur neck isnt too nice.

Those are very impressive. Is there anyway you would make ones for the pontiac g5.




The Billet Seat Brace is a new innovative part that will look amazing in your Cobalt! :cssNET:

The MRZ Performance seat braces are made out of High Strength 6061 T6 Billet Aluminum. They are CNC machined and hand brushed or polished to a mirror finish, you can get them in the finish of your choice. The unique design of this new part is made to fit perfectly on the headrest of your Chevrolet Cobalt or Pontiac G5. The seat brace is a 100% safe and will not affect any safety feature of your car. Easy to install in a minute, remove headrest, insert the MRZ Billet Seat Brace and put headrest back on seat, you're done!

Those billet seat braces are real eye catchers in car shows, these are perfect items to have a custom emblem engraved. You can have them with many different engravings (OEM emblems, MRZ emblem and custom emblems) or simply leave them plain. We can also anodize them in various colors.

The billet seat braces come in pair to fit both front seats. Approximate size is 1 1/2" x 1/2" x 6".

http://mrzperformance.vstore.ca/product_info.php/cPath/23_24_29/products_id/114

http://mrzperformance.vstore.ca/product_info.php/cPath/23_24_29/products_id/115


If you have any questions, feel free to email us at sales@mrzperformance.com :twothumbs


Brushed with the SS emblem:

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_SS.JPG

Polished with the SUPSERCHARGED emblem:

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_Supercharged.JPG

Here it is installed in a Cobalt SS coupe 2.4

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_SS__Installed.JPG.JPG

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_Supercharged__Installed.JPG

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_SS__Installed2.JPG

Thanks for looking and Happy Holidays to all of you!

Also check our new website at www.mrzperformance.com not fully completed but will be soon! ;)

If I didn't keep my headrest low I'd buy them... I think this would make it too high... I dunno the picture just makes it look high up

Looks awesome How about an SS Supercharged one?

http://mrzperformance.vstore.ca/images/custom/Seat_Brace/Cobalt/Seat_Brace_Supercharged__Installed.JPG

I'm in for a group buy

i would be in also.

they only question i really have with these is do they touch the back of ur neck at all? in wisconsin when its 10*F outside cold alum on ur neck isnt too nice.

The brace is far from touching to the neck, if it would be close to toch it would be dangerous to use but the way the headrest is made, the rod from the hearest are far away from the neck to avoid any contact, the brace being installed at the same location, it is completely safe and you wont toch it for sure ;)

Those are very impressive. Is there anyway you would make ones for the pontiac g5.

We can make some for the G5 people for sure if we get enough interest for them... I'll get the the G5 forums in the next days to see what people think about them there :twothumbs

If I didn't keep my headrest low I'd buy them... I think this would make it too high... I dunno the picture just makes it look high up

It may look high but it make the headrest at about the first click and you can also remove the seatbelt plastic guide with will remove about 1/2 inch from the height. Most people remove it to get a better access to rear passengers, it also look better without these IMO.

SS Supercharged one?

Is there any way you can make some for the back headrests for that length since we cant adjust those?

or would it be this length anyway

The brace is far from touching to the neck, if it would be close to toch it would be dangerous to use but the way the headrest is made, the rod from the hearest are far away from the neck to avoid any contact, the brace being installed at the same location, it is completely safe and you wont toch it for sure ;)



We can make some for the G5 people for sure if we get enough interest for them... I'll get the the G5 forums in the next days to see what people think about them there :twothumbs



It may look high but it make the headrest at about the first click and you can also remove the seatbelt plastic guide with will remove about 1/2 inch from the height. Most people remove it to get a better access to rear passengers, it also look better without these IMO.

i hate when people remove it...lol thats what stops me from riding with my buddy luke cuz his is so quick to lock up and choke the living shit outta me without it

SS Supercharged one?

No problem, if you want a set of these we can make it :twothumbs

Is there any way you can make some for the back headrests for that length since we cant adjust those?

or would it be this length anyway

We have not tested them for the back but I'm pretty sure we can make some that fits there also, maybe thiner to not have the back headrest to high and cut the vision... we'll keep you posted when we have some done for the back ;)

looks great!

I'd like one which says "GT" in the stock GM font.

however I feel it's easily $15-20 too pricey for what it is...

it should cost less than the sills IMHO, I know it's good quality but still..

looks great!

I'd like one which says "GT" in the stock GM font.

however I feel it's easily $15-20 too pricey for what it is...

it should cost less than the sills IMHO, I know it's good quality but still..

There is probably as much metal in them as in the sills so I can see the price justification.

There is probably as much metal in them as in the sills so I can see the price justification.

metal is that expensive? it's not gold plated, dayum!

metal is that expensive? it's not gold plated, dayum!

All metal prices are higher these days..I know cuz I work in a gold mine myself...:D

i have a question for u guys (MRZPerformance)...how about some tripods that attach to the bars on the head rest for camcorders...that would be sick

metal is that expensive? it's not gold plated, dayum!

metal really is that expensive right now. It's gone nuts lately.

i have a question for u guys (MRZPerformance)...how about some tripods that attach to the bars on the head rest for camcorders...that would be sick

That is an awesome idea Raven. I know I would like something like that cause my fiance can't keep the camera steady at all when I'm on and off the throttle...

I would want the head rest to be able to go all the way down though, or at least, mostly down.

As for all our other products, we can make custom emblems or any OEM emblems... just contact us via email at sales@mrzperformance.com or via PM over here ;)

These parts may seem pricey but there is a lot of CNC work involved in making them even if they are small parts and the finishing process can only be done by hand to get a perfect look. As people said, all metal prices have been rising out of control...

We'll get a group buy started on these pretty soon ;)

Is there any way you can make some for the back headrests for that length since we cant adjust those?

or would it be this length anyway

They cannot be made for the rear since the rods that hold the headrest are bent and the lower end making the seat brace impossible to slide in... Sorry about this :(

That is an awesome idea Raven. I know I would like something like that cause my fiance can't keep the camera steady at all when I'm on and off the throttle...

I would want the head rest to be able to go all the way down though, or at least, mostly down.

I guess the best thing would be to have sime kind of camara attachement or tripod to screw directly in the seat brace... if you guy have one of these thing we can help you out, just PM me if you want to realize this project :twothumbs

I guess the best thing would be to have sime kind of camara attachement or tripod to screw directly in the seat brace... if you guy have one of these thing we can help you out, just PM me if you want to realize this project :twothumbs

Would you be able to leave a piece extending out between the two seats, or make one that could screw in? I have a universal perch sitting around that I could send to you so that you could play around and try to figure out how to mount it to an aluminum arm. I'm sure we could figure something out. Let me know, I can PM you...

As for all our other products, we can make custom emblems or any OEM emblems... just contact us via email at sales@mrzperformance.com or via PM over here ;)




hum I sent ya an email through the website almost a week ago and still haven't got any reply from you yet?

so where's that group buy?

hum I sent ya an email through the website almost a week ago and still haven't got any reply from you yet?

something must have not worked out, I juts check back and no email from you :( I'll PM you in the next minute ;)

I would be interested in these at a group buy depending on the price.

We'll be posting a group buy for these tomorrow ;)

Regulare price is $59,95USD

10% off ($53.95) with 10-20 people
20% off ($47.95) with 20+ people

Shipping approx. $10

We'll keep you posted ;)