Any Newfoundlanders!?!?!?
#76
Should have known be easier talking to a ******* wall than getting any advice or info sooner leave this forum and stick it right in my computers trash bin better off nothing of ******* use on this ******* thing hope this gets my account banned so i dont have to do it myself
#78
New Member
central nl here 08 lnf, currently a build project. I have Gen 3 lnf block with 94k, and a bunch of new parts on order :
ottp billet shifter cable clamps
ottp short shifter
ottp weighted hybrid delrin/ss shift knob
ottp stage 2 transmission mounts
ottp shifter base bushings
zzp 3" catless dp with angled o2
MAF relocation harness
front end:
Moog upper and lower ball joints
Moog lower control arm bushings
Moog sway bar links
Moog inner and outer tie rods
anything else in the front end that is shot will be replaced as well. I am expecting something as I have a clunk going on up forward. also I am pending purchase on a used zfr 6758.
looking to get some black Friday deals from zzp as the Canadian dollar is **** right now, I am in need of charge pipes, blow off valve and a shim for the stock one, zzp catch can, new o2 sensor and some other odds and ends. also I am waiting to purchase 1" wheel spacers, bc coilovers, 2step/wot box, Ky or zzp clutch, custom projectors from riceburner, Moog rear lca bushings and I'm unsure of what else.
ottp billet shifter cable clamps
ottp short shifter
ottp weighted hybrid delrin/ss shift knob
ottp stage 2 transmission mounts
ottp shifter base bushings
zzp 3" catless dp with angled o2
MAF relocation harness
front end:
Moog upper and lower ball joints
Moog lower control arm bushings
Moog sway bar links
Moog inner and outer tie rods
anything else in the front end that is shot will be replaced as well. I am expecting something as I have a clunk going on up forward. also I am pending purchase on a used zfr 6758.
looking to get some black Friday deals from zzp as the Canadian dollar is **** right now, I am in need of charge pipes, blow off valve and a shim for the stock one, zzp catch can, new o2 sensor and some other odds and ends. also I am waiting to purchase 1" wheel spacers, bc coilovers, 2step/wot box, Ky or zzp clutch, custom projectors from riceburner, Moog rear lca bushings and I'm unsure of what else.
#81
New Member
Bump, anyone still on this from st.john's area? im 35 minutes outside there, i have to use the computer for the next 6 months or so for college from covid-19, so i will be using this forum site more often...posting up build forum later.
2008 Cobalt LT 2.2L SC 3.1"
2008 Cobalt LT 2.2L SC 3.1"
Thread
Thread Starter
Forum
Replies
Last Post