no sound after installing clarion nz500 radio
#1
New Member
Thread Starter
Join Date: 06-01-14
Location: bothwell
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
no sound after installing clarion nz500 radio
I bought the radio back a few years and decided to install it in my SC 2005 cobalt. The aftermarket wiring harness took care of the main harness which included the power wires, speaker wires and such. There is a second radio plug. Can someone tell me what to hook to this harness and what in HE>> IS THE WIRES FOR and do? I'm certain this is why I have no sound. The car orig. had a pioneer system, and the radio was removed before I bought the car. I have run wiring for power amps and have aftermarket speakers and such. I would like to run both sets of speakers if possible. I used a similar system in my crown vic. and it sounded awesome. I did upgrade the factory speakers though. The second plug is black with gray ears, 5 wires, Pink, green, orange, brown, and black. There are second colors on these wires, but those are the main colors. I'm sure there is an easy fix. I just havn't found it. Please help
#3
New Member
Thread Starter
Join Date: 06-01-14
Location: bothwell
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Great, I'm sure your right. this is a stock factory pioneer system. I'm not quite sure as to what wire it is ,but i'll try and trace it. Were did they hide the amp in these cars ? And did they feed 12v or do I need to cut back the volts to a lesser amount?
Thread
Thread Starter
Forum
Replies
Last Post
agentirons
Electronics, Audio, and Video
2
10-16-2015 02:11 AM