Back in the game, picked up a 2nd lnf
#1
New Member
Thread Starter
Join Date: 12-14-11
Location: Jacksonville, NC
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Back in the game, picked up a 2nd lnf
I've been on here before with 2 LNF's, but sold one along with my procharged heads/cam GTO for a truck when the wife and I had a baby. Found this steal and got it this past weekend!
'09 85k miles original owner, paint looks immaculate!
-ZFR 6758 (13k miles)
-Built trans w/4.45 final drive (10k) miles
-Dejon hot/cold side
-3" Hahn DP and exhaust
-275/40/17 Nitto 555's on the front, 255's on the rear on some Team Dynamic wheels
-Mpx catch can
-3 bar map sensors
-Drag bags for the rear
-Different suspension/springs front and rear
Got it for 10k with a clean car fax an not one major issue in the past.
Currently in the process of getting it remote tuned on E47 and hopefully will see some good results! Any fellow members with near identical mods want to post their numbers the achieved with this setup on E47?
'09 85k miles original owner, paint looks immaculate!
-ZFR 6758 (13k miles)
-Built trans w/4.45 final drive (10k) miles
-Dejon hot/cold side
-3" Hahn DP and exhaust
-275/40/17 Nitto 555's on the front, 255's on the rear on some Team Dynamic wheels
-Mpx catch can
-3 bar map sensors
-Drag bags for the rear
-Different suspension/springs front and rear
Got it for 10k with a clean car fax an not one major issue in the past.
Currently in the process of getting it remote tuned on E47 and hopefully will see some good results! Any fellow members with near identical mods want to post their numbers the achieved with this setup on E47?
#2
Senior Member
iTrader: (13)
nice pick up man!! seems like all the work was done properly! also HOLY **** 275 on the front!!!
as far as your numbers go check this out here. id say you can be around 450whp easy man.
https://www.cobaltss.net/forums/dyno...2015-a-304260/
as far as your numbers go check this out here. id say you can be around 450whp easy man.
https://www.cobaltss.net/forums/dyno...2015-a-304260/
#4
New Member
Thread Starter
Join Date: 12-14-11
Location: Jacksonville, NC
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
nice pick up man!! seems like all the work was done properly! also HOLY **** 275 on the front!!!
as far as your numbers go check this out here. id say you can be around 450whp easy man.
https://www.cobaltss.net/forums/dyno...2015-a-304260/
as far as your numbers go check this out here. id say you can be around 450whp easy man.
https://www.cobaltss.net/forums/dyno...2015-a-304260/
Thanks for the link!
Its growing on me!
#8
New Member
Thread Starter
Join Date: 12-14-11
Location: Jacksonville, NC
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
I don't have any additional fueling mods. The injector offset has to be adjusted as well as the fuel trims for the MAF, it's all tuning from there. Certain limitations before the stock fuel system maxes out of course.
#10
New Member
Thread Starter
Join Date: 12-14-11
Location: Jacksonville, NC
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post