North Dakota ?? Anyone else here??
08-09-2006, 08:03 PM
#1
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
North Dakota ?? Anyone else here??
Just wonderin' if ther any other cobalt playas in da state?? if ya is....where at guys or gals? me chilin' in Bismarck, came from da Cities in MN tho 
!!
!!
10-01-2006, 12:17 PM
#3
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Another LSJ nearby!
Well hey thats kule....a buddy of mine in the the RE club down here was sayin he saw another one at an autocross meet up there a while back!! could be that one! there is an autocross meet at BSC 2day, maybe we'll meet up later!
10-01-2006, 12:29 PM
#5
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Finally another SS is found!
It's Black '06 Recaro G-85 bonestock so far, with shorty antenna
i'm actually goin to the BSC AutoX here in a lil bit, i'm not entering but i know the guyu with the Red MX6 and the girl with the 300ZX with shitty exhaust
**** i thought i was only one in ND that has an SSC....there a kid in town that gotz a look a like SSC, but it shitty 2.2 auto....and then of coarse base SS 2.4 around!! What you all got on yours?
i'm actually goin to the BSC AutoX here in a lil bit, i'm not entering but i know the guyu with the Red MX6 and the girl with the 300ZX with shitty exhaust
**** i thought i was only one in ND that has an SSC....there a kid in town that gotz a look a like SSC, but it shitty 2.2 auto....and then of coarse base SS 2.4 around!! What you all got on yours?
10-01-2006, 12:33 PM
#6
Senior Member
Join Date: 07-03-06
Location: Minot
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Not much suspension mods, and an airbox mod. I know that there are two more SS/SC's in Minot. One red one and a black one here on base. I have a black non G85'ed SS/SC, evenutally this winter I will run GM Stage 2 with a 2.9-3.0 pulley. Plans for yours?
10-01-2006, 12:36 PM
#7
Senior Member
Join Date: 07-03-06
Location: Minot
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I know which cars you were talking about. We were going to come down there for Saturday's event by my ass went home and got my springs installed. Is there any more events this year or was that the last of them? I wanna try out the new springs real bad.
10-01-2006, 12:53 PM
#8
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Last one i think!
I plan on doin' the GM stage II also, but i may just go aftermarket for higher yields right away! I plan on sumwhere round 350-400hp n i'll quit with the engine but first i need to get the motor mounts n suspension, the LSD makes her jump if you really get on it low end....right now i'm tryin' to get my system goin that i had in my '01 Cavalier Z24. Exhaust n intake n all that **** will be nice also But te meet starts here in 10 minutes dude, gotta go check these guy out!!
But te meet starts here in 10 minutes dude, gotta go check these guy out!!
10-01-2006, 02:04 PM
#9
Senior Member
Join Date: 07-03-06
Location: Minot
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Good luck with 350 probably won't get there unless you go Twincharge or a full turbo. There is a 296 whp Ion Redline but thats with a 2.5" and all supporting mods. 300 hp is about the maximum I think you can go with the supercharger without it self destructing.
10-03-2006, 03:18 PM
#10
New Member
Join Date: 09-09-06
Location: Minot ND
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
How was the meet??? Maybe we could all get together and have an LSJ meet. I am curious if all the AutoX events are over. I Would like to go to one more b4 winter hits.
10-03-2006, 07:56 PM
#11
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
LSJ Meet in ND Kule!
Hey what up guys!
Ya all the meets are done for the year according to the SCCA guy! THis last weekend here that white MR2 with 4 drags slicks around whooped ass on his last run, his first 4 runs his throttle cable fucked up and he had to shut her down! The Lotus Exige was second and can't remember what got the rest!
I gotz a book on how to the build the 2.0 EcoTec Supercharged! It tells ya for cams, boost, injectors, pistons, crank, rings, intake manifold setups, everything...according to GM you can get around 500hp with the internals before diggin to deep in the motor and pocketbook!
Igotz 2 get the suspension...upfront especialy tightened up! but firstme gon try to get the DVD system goin....damn wire harness and all the install crap is spendy for these *******!...rite now i got sum engineering goin' on from the 6x9's into RCA adapter with a kill switch on the amps, but that just aint doin' for me need my 4000watts of Fury ya know!! After i get that goin then i'll focus on gettin a CAI, Pulley, Injectors, etc.
Sumwhere in between that i'll get small suspension parts for the front of it anyways!
How does that ingalls dampener work?..i wasn't sure if i should get that or the Poly's upfront first...i know the poly's helped quite abit on my '01cavalier, but didn't quite get that far with that motor to put a dampener on it!
Ya all the meets are done for the year according to the SCCA guy! THis last weekend here that white MR2 with 4 drags slicks around whooped ass on his last run, his first 4 runs his throttle cable fucked up and he had to shut her down! The Lotus Exige was second and can't remember what got the rest!
I gotz a book on how to the build the 2.0 EcoTec Supercharged! It tells ya for cams, boost, injectors, pistons, crank, rings, intake manifold setups, everything...according to GM you can get around 500hp with the internals before diggin to deep in the motor and pocketbook!
Igotz 2 get the suspension...upfront especialy tightened up! but firstme gon try to get the DVD system goin....damn wire harness and all the install crap is spendy for these *******!...rite now i got sum engineering goin' on from the 6x9's into RCA adapter with a kill switch on the amps, but that just aint doin' for me need my 4000watts of Fury ya know!!
After i get that goin then i'll focus on gettin a CAI, Pulley, Injectors, etc.Sumwhere in between that i'll get small suspension parts for the front of it anyways!
How does that ingalls dampener work?..i wasn't sure if i should get that or the Poly's upfront first...i know the poly's helped quite abit on my '01cavalier, but didn't quite get that far with that motor to put a dampener on it!
11-07-2006, 09:54 PM
#13
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
GM Stage II w/2.8p. CAI, n Exhuast.....HELLZ YES!!!
I just got the Stage II GM kit on my car 2day.....i put the injectors in myself and took the car to the gm shop (no SES lights at all), then had them put the pulley hub, n reprogram the computers!! they only charged me $200 n i paid $645 for the kit!! i got the 2.8 aftermarket pulley for the GM Stage II and put that on, she boostin to 18psi!!!! i have a K&N Cold Air Intake comin' in the mail, and exhuast is goin' on 2maro!!! she already screams, can't wait to see what it does after all that!! gonna need sum suspension work now, engine bay most specifically!
11-12-2006, 09:33 PM
#15
Senior Member
Join Date: 07-03-06
Location: Minot
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
The torque dampener works great, and you can adjust it. Took me 10 minutes to install, about your stage 2. Your injectors are going static every time you go past like 6200 RPM. That means they are going to stick open, dumping raw fuel in. Your engine is going to blow up, I can guarentee you that. You probably went with pulley boys GM stage 2 look a like right? Well good luck I did weeks and weeks of research I have decided that the GM injectors are no good for the 2.8. They are a **** ton of threads proving this with AF Ration graphs, you can see them max out. If I were you I would change that **** out and go with the stock 3". Go with some 60 lbs/Hptuners if you decide to keep the 2.8". Its going to blow up the question is when. Sounds like your Chevy dealership doesn't blow dick like Minot's they ******* hate me here. They know me by name because I have so many problems. Whats the Bismarck dealership you go to? Ryan Chevrolet wants like almost 1k for an installed GM stage 2, I laughed and walked out.
11-14-2006, 08:14 PM
#16
New Member
Thread Starter
Join Date: 02-15-06
Location: Bismarck, ND
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
gotta push the limits rite!
i generally don't take it over 6k and if i do i only go to 6500 or so! i don't hit the rev limiter......mostly the car is driven in town, not taken over 60...which is 2nd!!! but the mid-range improvement is great! i eventually am goning to go past "Stage III" with 60lbers or more n NOS, more coolers n such with all the good fun stuff...............just as soon as the warrenty go off, but for now this is probably all i'm gonna do for another year or two (engine)!!!
12-13-2006, 01:19 PM
#22
Senior Member
Join Date: 07-03-06
Location: Minot
Posts: 669
Likes: 0
Received 0 Likes
on
0 Posts
Jrenner you ever been in Minot? There is a red SS/SC with some tint. I think I saw your car when I was on my way home. Out on highway 2, looks good. I had the black one without the gay ass wing.
02-23-2007, 01:02 PM
#23
New Member
Join Date: 02-01-07
Location: Sykeston
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
hey im from sykeston, haha probly dont know where that is, but it is kinda by carrington in central nd. i just got a 05 ss/sc a few weeks ago. i am ordering an intake for it but havnt done anything else to it yet. once i start working this summer i am going to put an exhaust on and stage II.
