06blackg85ss

iTrader: (1)

dude;; it's probably the most simple thing to do... your coolant is hotter than your tranny fluid should be. hence the separate radiator for the tranny. If you can't tackle this, well...

blck05cavi

as i say.. everything comes with instructions..lol..

so im so bored i started to search on line and i found out that the stage 1 turbo kit from hahn will put me at 235hp at 8psi.. but with my mods + a lil more mods and tuning at 8psi i think 250-260 is possible.. =) this is totally out of no where sorry..

iLLmaTic3s

yes that wud b nice...haha how much money for the kit..i cant only imagine.

blck05cavi

idk how much but i found these as well =)

http://www.andysautosport.com/chevro..._kits/vortech/


i just dont know what anyof that info on there means.. lol
Vortech Cavalier=).. haha

BlackSS05

ok havent been on since friday night. on the way home me an andy the supra got stuck with a svt ligtning. supra runs him and pulls HARD 2-3 cars. So i pull up to see what i can do we go from 80-120 and its dead even. Next run was the 3 of us 3 wide from 60 i pulled 1 car on the svt and stayed with my nose on the supras bumper. I was very happy dunno what you guys think but that is a fast truck.

RedlineBrian

Nice run. Chris.

Me and Mezzano had a little quickie run. 40 to about 90ish, i think, i wasn't really looking.
Lid and Cat-Back M6 Z28 vs. BCP 2.6 Cobalt

Camaro by 1.5-2. I was very impressed with Mike's car. That thing pulls like a mother ******. Fast ******' Cobalt.

Mike, get a full exhaust on that thing. BCP FTW!

mezzanno

yeah that was upsetting. Thought the cobalt had more in it. The camaro jumps out real hard. Anyway since that loss I decided to stop modding the balt after the ported blower go's in. Gonna just concentrate on getting money for axles, clutch and a rear end brace for the vette. Then a 175 shot.

BlackSS05

thanks bri. tomorrow i might have the ls1 out. maybe if you come we can get a quick run in to see. its a 2002 z28 m6 with catback. i also wanna run the supra to see have to talk 2 my mom when she comes home but ill probably have it.

06blackg85ss

iTrader: (1)

aaah man... lol Remember though that camaro has almost 100lb/ft of tq at the wheels more than ya. I dunno I jumped on that srt-4 that dyno's 335/330 and took him by a car up to 140mph from a 40 roll. might as well hook up the vette though. Much better platform to work with.

RedlineBrian

Z06 FTW!

I gotta start getting some **** done to the Camaro too.

CJ BadBlackSS

Hmmm I need to change my air filter when I do my pre-track overhaul. Paul whats the K&N filter our cars use? E1009 or something similar?

mezzanno

Im not giving up on the cobalt. Just after the blower swap and solid engine mount it's goiing on the back burner for awhile. Have to hook the vette up a bit more and then pay these damn cars off. I want my money to be my money again.

RedlineBrian

I know what you mean with the my money thing. I can't wait for that to happen, but that's gonna be a while for me. haha

CJ BadBlackSS

Yeah same here. Only 5 more years of payments. I think depending on my raise this July I might step up my payments $50 a month. That should cut off a bit of my 6 year term.

06blackg85ss

iTrader: (1)

yeah I use an E-1009 filter for the airbox mod.

I know you won't give up on the balt mike, but just get those mounts and I"ll have the blower finished soon for ya and just pay the things off make some double payments, just remember to put the 2nd one straight to the principal. I'm taking a break on the balt to do that myself. Trying to finish paying it off this year soon. still owe 17k on it, but I should be able to knock it out. Specially once I get my quarterly bonus soon.

mezzanno

Im getting an overnight job soon. Also starting that enginerring job in late summer and I'm gonna try to freelance meat cut on the weekends. If it all works out I should be able to pay 3k a month on the vette. After that the cobalt. Hopefully I'll be debt free by 1/1/09

06blackg85ss

iTrader: (1)

nice man... hopefully you still got friday nights free

CJ BadBlackSS

What kind of engineering job?

And that's able to mount using a clamp?

06blackg85ss

iTrader: (1)

yeah just gotta cut out the air box, or drill a hole in the side to get to the clamp

CJ BadBlackSS

OK cool. Couldn't really tell from all the pics I saw online. Ok here's a question, why choose that one when there's one made specifically for our cars? Not passing judgement on your knowledge...just curious.

06blackg85ss

iTrader: (1)

well I use the K&N E-1009 when I cut the airbox out I doubt it will really fit in the stock airbox

CJ BadBlackSS

Oh ok. I was just wondering. Guess I'll order one this week so I can get it in before the 30th.

06blackg85ss

iTrader: (1)

well if you want to keep the stock airbox intact, go with the dropin replacement... if you want to do the airbox mod, get the E-1009

CJ BadBlackSS

I'm gonna do the mod. Not like I have a warranty anyways and my stocker is wide open on the bottom. Might as well jsut cut the thing up.

06blackg85ss

iTrader: (1)

sounds good man ... let me know if ya need a hand

this is what it comes out like