Problems/Service/Maintenance Do you have problems with your new 2.0, 2.2, or 2.4L? What kind of service did you have done?

Middle of a Rebuilding a Crashed Balt

Thread Tools
 
Search this Thread
 
Old 02-23-2017, 06:22 PM
  #51  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by SS_MuNky
That's where I would start.

But before you go replacing it (its part of the hub/bearing) I would go over the harness and make sure that everything is tight and intact.
it's 280 dollars to replace the stupid sensor I'm going to kill auto correct pretty damn soon
Old 02-23-2017, 06:58 PM
  #52  
New Member
 
COBALTace's Avatar
 
Join Date: 01-26-14
Location: Canada
Posts: 128
Received 1 Like on 1 Post
Same here! I got a 05 Ion for 2700$ all in after getting a parts car and putting the engine and trans in the new one. 142xxxKM on the body 9000KM on engine and F35 trans. Gonna be awesome this winter or next summer once i get it supercharged and all tuned up to be running decent on 93 premium gas and get those fe5 and yyz suspension parts into it. Also needs driver side seat like nobodys business!! Buddy who owned it since new drove it to work and home thats it. Mostly highway (Halifax to Enfield, NS) but he sat waaay the hell over by the door so the entire side of the seat got eaten by his arsehole i assume. Ill post a picture in the AM...but hot damn like an 1/8 the seat is missing !!!!
Old 02-23-2017, 07:13 PM
  #53  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by COBALTace
Same here! I got a 05 Ion for 2700$ all in after getting a parts car and putting the engine and trans in the new one. 142xxxKM on the body 9000KM on engine and F35 trans. Gonna be awesome this winter or next summer once i get it supercharged and all tuned up to be running decent on 93 premium gas and get those fe5 and yyz suspension parts into it. Also needs driver side seat like nobodys
business!! Buddy who owned it since new drove
it to work and home thats it. Mostly highway (Halifax to Enfield, NS) but he sat waaay the hell
over by the door so the entire side of the seat got
eaten by his arsehole i assume. Ill post a picture
in the AM...but hot damn like an 1/8 the seat is
missing !!!!
lol that's pretty damn funny haha I'm in to balt around 1700 dollars so far that's not including the stupid body kit I paid for an decided not to use

Last edited by WillisW; 02-24-2017 at 12:11 PM.
Old 02-24-2017, 12:09 PM
  #54  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Got the new end linkage hope I got the right one got the 13 inch the other is a 10 inch so we shall see how that fits
Old 02-24-2017, 02:54 PM
  #55  
New Member
 
COBALTace's Avatar
 
Join Date: 01-26-14
Location: Canada
Posts: 128
Received 1 Like on 1 Post
Thats the one you want! 13" end links in the Base models the SS lnf take the shorter ones. Ill go get a picture of them seats now. Today was a busy day. I stripped the back end of the Ion and put marine grade caulking around all of the seams in the driver side wheel well and along the rear windscreen...somehwere was leaking and pooling at the bottom of the trunk. Figured its be better to do it now before i go frigging around and installing a plywood floor and subwoofers :-P
Old 02-24-2017, 02:59 PM
  #56  
New Member
 
COBALTace's Avatar
 
Join Date: 01-26-14
Location: Canada
Posts: 128
Received 1 Like on 1 Post


Hardly pressing with force.......



Pervious owner must've stored his drugs down there...... Idfk..moat of the thigh support isnt there the fabric just keeps its shape. When i drive i have to scootch ontop of the armrest just to sit level...LOL
Old 02-24-2017, 04:48 PM
  #57  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by COBALTace
Thats the one you want! 13" end links in the Base models the SS lnf take the shorter ones. Ill go get a picture of them seats now. Today was a busy day. I stripped the back end of the Ion and put marine grade caulking around all of the seams in the driver side wheel well and along the rear windscreen...somehwere was leaking and pooling at the bottom of the trunk. Figured its be
better to do it now before i go frigging around and installing a plywood floor and subwoofers :-
P
so what your saying is I got the wrong one cause I got the 13 inch an if there shorter I need the 10 inch which they have to order in
Old 02-24-2017, 04:49 PM
  #58  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by COBALTace;7640728
[i
Hardly pressing with force.......[/i]



Pervious owner must've stored his drugs down there...... Idfk..moat of the thigh support isnt there the fabric just keeps its shape. When i drive i have to scootch ontop of the armrest just
to sit level...LOL
lol worst part is the seats are ugly as well upgrade the interior haha
Old 02-24-2017, 05:32 PM
  #59  
New Member
 
COBALTace's Avatar
 
Join Date: 01-26-14
Location: Canada
Posts: 128
Received 1 Like on 1 Post
Yeah. I am undecided on buying a few cans of blacl paint and doing it the first nice week in June or May. (I live in Nova Scotia and today was the first nice day we had since before christmas sooo....) but theres also a good lot of used quad coupes in the province so i coukd just save up 100 bucks and try to find someone with panels that havent had 2 dofferent children puke and **** all over them and espically if there no dog toenail scratches. It seems every god damn ion ive looked at for parts the owner has got some great dane beast that got into a 6 pack of Monster energy while it wa sleft in the car!

Ahh the life. I do love it. But im starting to pull hair...
Old 02-24-2017, 05:56 PM
  #60  
New Member
 
COBALTace's Avatar
 
Join Date: 01-26-14
Location: Canada
Posts: 128
Received 1 Like on 1 Post
Originally Posted by WillisW
so what your saying is I got the wrong one cause I got the 13 inch an if there shorter I need the 10 inch which they have to order in
Forgot to mention the bit about the end links. You mean to say the 13" one doesn't fit?

The 13 inch is for base and 2.4 i believe. There a 9.6" for lnf i know...was looking for some a week or so ago
Old 02-26-2017, 12:36 AM
  #61  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by COBALTace
Forgot to mention the bit about the end links. You mean to say the 13" one doesn't fit?

The 13 inch is for base and 2.4 i believe. There a 9.6" for lnf i know...was looking for some a week or so ago
well I will pull out the broken one an measure it an see if it's wrong
Old 02-27-2017, 11:59 AM
  #62  
New Member
 
SS_MuNky's Avatar
 
Join Date: 11-21-16
Location: Kitchener, ON
Posts: 181
Received 37 Likes on 31 Posts
$280 for a wheel bearing/hub?? Are you getting it gold plated?
The most expensive one on RockAuto is $209 CAD, it is an SKF rear.
Old 02-27-2017, 12:21 PM
  #63  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by SS_MuNky
$280 for a wheel bearing/hub?? Are you getting it gold plated?
The most expensive one on RockAuto is $209 CAD, it is an SKF rear.
Glad I didn't get it then sounds like I would get screwed over if I buy it from Napa
Old 02-27-2017, 01:08 PM
  #64  
Senior Member
 
cluelessk's Avatar
 
Join Date: 06-10-12
Location: Manitoba, Canada
Posts: 2,886
Received 63 Likes on 61 Posts
Originally Posted by WillisW
Glad I didn't get it then sounds like I would get screwed over if I buy it from Napa
Napa is consistently the most expensive parts store in my area.
Old 02-27-2017, 01:22 PM
  #65  
New Member
 
SS_MuNky's Avatar
 
Join Date: 11-21-16
Location: Kitchener, ON
Posts: 181
Received 37 Likes on 31 Posts
I've got a couple places locally where I can get good deals on parts I need NOW, but if I ever have notice before ordering, I get it from Rock Auto. I tend to order parts along with a friend to save on shipping. He almost always needs something.
Old 02-27-2017, 08:39 PM
  #66  
Member
 
bahoodle's Avatar
 
Join Date: 11-01-16
Location: Western NY
Posts: 271
Received 10 Likes on 10 Posts
thats alot for a bearing lol i think their like 125 for rears n 80 for fronts at autozone

Last edited by bahoodle; 02-27-2017 at 08:47 PM.
Old 02-27-2017, 09:26 PM
  #67  
Senior Member
iTrader: (6)
 
ECaulk's Avatar
 
Join Date: 07-19-10
Location: Houston, Texas
Posts: 26,574
Received 836 Likes on 733 Posts
Originally Posted by bahoodle
thats alot for a bearing lol i think their like 125 for rears n 80 for fronts at autozone
$CA vs $US
Old 02-27-2017, 11:12 PM
  #68  
Senior Member
 
cluelessk's Avatar
 
Join Date: 06-10-12
Location: Manitoba, Canada
Posts: 2,886
Received 63 Likes on 61 Posts
Originally Posted by ECaulk
$CA vs $US
Plus things just cost more here. Just cause.
Old 03-01-2017, 09:04 AM
  #69  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by cluelessk
Plus things just cost more here. Just cause.
I noticed things cost more here an I'm not going to go to Napa anymore just to stupid of prices
Old 03-07-2017, 08:30 PM
  #70  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by WillisW
I noticed things cost more here an I'm not going to go to Napa anymore just to stupid of prices
well the car is very moody an figured out why the right front speaker isn't working cause it's not even ******* there an it's moody cause it doesn't want to start sometimes but starts other times abs light is still on won't go away sub wires are cut from the previous owner can somebody tell me what wires go to the sub an the right speaker so I can get them working
Old 03-09-2017, 05:57 PM
  #71  
New Member
 
COBALTace's Avatar
 
Join Date: 01-26-14
Location: Canada
Posts: 128
Received 1 Like on 1 Post
Originally Posted by WillisW
well the car is very moody an figured out why the right front speaker isn't working cause it's not even ******* there an it's moody cause it doesn't want to start sometimes but starts other times abs light is still on won't go away sub wires are cut from the previous owner can somebody tell me what wires go to the sub an the right speaker so I can get them working
What have you got done so far?
Old 03-09-2017, 06:08 PM
  #72  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by COBALTace
What have you got done so far?
besides sticking the aftermarket radio in nothing I've been trying to find a wiring schematic for the ss but can't find one I had one for my 05 with everything on it but can't remember if the wiring is different between the years I know the radio hook ups are different but I don't know if the amp wiring is the same or different

Last edited by WillisW; 03-09-2017 at 06:28 PM.
Old 03-09-2017, 08:26 PM
  #73  
New Member
 
alchargo's Avatar
 
Join Date: 10-11-16
Location: Sioux City, Iowa
Posts: 22
Likes: 0
Received 1 Like on 1 Post
This is what I could find on Alldata, hopefully it helps.
Attached Thumbnails subwoofer-uq3.gif   right-front-door-uq3.gif   power-ground-uq3.gif   amplifier-uq3.gif  
The following users liked this post:
WillisW (03-10-2017)
Old 03-09-2017, 08:33 PM
  #74  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by alchargo
This is what I could find on Alldata, hopefully it helps.
​​​​​​​okay thank you that should help
Old 03-10-2017, 12:39 PM
  #75  
New Member
Thread Starter
 
WillisW's Avatar
 
Join Date: 11-17-16
Location: Near the middle BC Canada
Posts: 82
Received 0 Likes on 0 Posts
Originally Posted by COBALTace
Willis you want a good stereo with bluetooth cd and auxiliary get a JVC KDR780BT. I have a 720 and the one im talkig about is bascially the 720's big sister stereo

https://www.crutchfield.com/S-1QfBo1...KD-R780BT.html
the aftermarket radio I just bought is the kenwood kdc-BT565U bought it specifically because It has the mic hook up an steering wheel controls an has the port for satellite radio as well I paid just under 300 dollars for it


Quick Reply: Middle of a Rebuilding a Crashed Balt



All times are GMT -4. The time now is 01:03 AM.