Regular Meet # 1: Sunday, October 5th 4:00 PM
Thread Starter
Senior Member
Joined: 06-17-07
Posts: 966
Likes: 0
From: Bonnyville OIL COUNTRY, AB
Damn, I'd love to hear custom exhausts, I have to figure out one for my 2.0 and my cousin's 2.4 
By the looks of it I'll be underneath the car instead of driving it, so I don't think I can make it. If the res. cost you anything let me know and I'll get you back for it.
PS: Anyone have a transmission mount bracket for the SS/SC? For the rear mount. Carter Chev wants me to wait a month or more and GM Parts Direct won't email me back
By the looks of it I'll be underneath the car instead of driving it, so I don't think I can make it. If the res. cost you anything let me know and I'll get you back for it.
PS: Anyone have a transmission mount bracket for the SS/SC? For the rear mount. Carter Chev wants me to wait a month or more and GM Parts Direct won't email me back
You're only in Maple Ridge, there will be a few people passing thru there!!!!!
Member
Joined: 03-02-08
Posts: 270
Likes: 0
From: Kingston, ON
I'm not sure if it's a different part on the 2.2/2.4s or not, mine was an auto. I'll have a look though, thanks
I'll be firing a refurbished axle in, I'm pretty sure the problem was caused by the rear mount pulling the engine back. If I'm done in time, hells yeah, if not, next month. Cruises are no fun in the snow though.
I'll be firing a refurbished axle in, I'm pretty sure the problem was caused by the rear mount pulling the engine back. If I'm done in time, hells yeah, if not, next month. Cruises are no fun in the snow though.
but i dont have time coz im paintballing tomorrow
....so sunday must study!oh and as always, more pictures the better!
Member
Joined: 03-02-08
Posts: 270
Likes: 0
From: Kingston, ON
Off-topic, but did anyone have a yellow SS/SC at the 7/11 in Port Moody the other day? I would've been the construction worker in the green hat eye-raping your car Sounded pretty good if it was anyone on here, intake at least, exhaust maybe.
To the garage I go, I'll take no less than 125,000 test fits and torques of the engine to see if it stays straight. If it does the axle goes in.
Sounded pretty good if it was anyone on here, intake at least, exhaust maybe.To the garage I go, I'll take no less than 125,000 test fits and torques of the engine to see if it stays straight. If it does the axle goes in.
Senior Member
Joined: 10-14-06
Posts: 3,623
Likes: 1
From: Vancouver, BC
unless they ask you about it..i had a guy in his what looked like mid 30's pull up beside me in like a 90's bmw saying he was thinking of buying one for his kid and asked me a bunch of questions about it a few months ago hha...and i was in work clothes too haha...oh the yellow balt was it a mexican lookin dude?
Senior Member
Joined: 06-15-08
Posts: 4,339
Likes: 0
From: Maple Ridge, B.C Canada
BTW, the meet is a no for me, im going to work at 6 am tomorow, i wont be back until late late that night unless we have unit problems, then we just give out 10 hours notice and be off by 4 pm lol
Thread Starter
Senior Member
Joined: 06-17-07
Posts: 966
Likes: 0
From: Bonnyville OIL COUNTRY, AB
ok well this is still a go for me for anyone who is going... I will be there and I will reserve the spots at the restaurant lets say for 10 people... if people show, great, if not then you're missing out. I'm thinking lets try and be like the ontario cobalt/pontiac club and do bi-weekly meets instead of just monthly... if anyone is down for that???
Senior Member
Joined: 06-15-08
Posts: 4,339
Likes: 0
From: Maple Ridge, B.C Canada
ok well this is still a go for me for anyone who is going... I will be there and I will reserve the spots at the restaurant lets say for 10 people... if people show, great, if not then you're missing out. I'm thinking lets try and be like the ontario cobalt/pontiac club and do bi-weekly meets instead of just monthly... if anyone is down for that???
Thread Starter
Senior Member
Joined: 06-17-07
Posts: 966
Likes: 0
From: Bonnyville OIL COUNTRY, AB
Anyone in agreeance... even if it is just a few people? Lets build this up!!!
Thread Starter
Senior Member
Joined: 06-17-07
Posts: 966
Likes: 0
From: Bonnyville OIL COUNTRY, AB
Anyways.. It'll be great to see most of you there.. for anyone who thinks they'll be late... I've reserved a table at the springs for 4:20... So be there at 4:00 and gather, we'll head in about 4:15... after general bullshit and eating, should be done there approx 6'ish.. maybe do some cruising around back roads then after that's done, Castle Fun Park .
.
Member
Joined: 10-17-07
Posts: 318
Likes: 0
From: vancouver
why dont u do like a bi-weekly thing and alternate.........
poco/co/langley .....then vancouver.....then langley/mission again?
i'll be down for the vancouver ones....plus cypress mtn is a great place for pictos or QE park parking lot.. lots of lights at night super bright!
poco/co/langley .....then vancouver.....then langley/mission again?
i'll be down for the vancouver ones....plus cypress mtn is a great place for pictos or QE park parking lot.. lots of lights at night super bright!
Thread Starter
Senior Member
Joined: 06-17-07
Posts: 966
Likes: 0
From: Bonnyville OIL COUNTRY, AB
you guys all suck.... seriously.. wth! lol.
So here's all showed to the meet:
1- myself
2- Fastone
3- icemaid
4- oomikey
& the winner of mini golf was oomikey
At this rate, you can forget the bi-weekly meets, someone else can organize them... I may think about doing monthly but bi-weekly I'll leave that in someone else's hands or think about organizing major meets only.
So here's all showed to the meet:
1- myself
2- Fastone
3- icemaid
4- oomikey
& the winner of mini golf was oomikey
At this rate, you can forget the bi-weekly meets, someone else can organize them... I may think about doing monthly but bi-weekly I'll leave that in someone else's hands or think about organizing major meets only.
Senior Member
Joined: 06-15-08
Posts: 4,339
Likes: 0
From: Maple Ridge, B.C Canada
wow that sucks, i had a legititmate excuse for not going, what about the other 7-8 people?
sorry i couldnt be there rob, hopefully next time i wont have work and i have the car!! lol
sorry i couldnt be there rob, hopefully next time i wont have work and i have the car!! lol
Senior Member
Joined: 10-14-06
Posts: 3,623
Likes: 1
From: Vancouver, BC
at least i said i probably couldn't make it ..i ended up having to do family stuff so i couldn't but i wish i coulda gone ..not to mention i found out i was laid off from one of my jobs so that didn't help either lol
but i wish i coulda gone ..not to mention i found out i was laid off from one of my jobs so that didn't help either lol
Member
Joined: 03-02-08
Posts: 270
Likes: 0
From: Kingston, ON
Eh, I spent the day working on the car and coming to the realization that my problems were probably caused by the horrible mechanic I have. You know the one that totally isn't me, nope, no way. 
If we go again I'll be there. Sorry again, hope you all had fun anyway. I'll carjack the black G5 next time if I have to.
If we go again I'll be there. Sorry again, hope you all had fun anyway. I'll carjack the black G5 next time if I have to.