Parts Buy and sell your parts
Mark this thread as Unsold

FS: ZZP 2.2/2.4 supercharger kit, spare m62, pulley, hub

Thread Tools
 
Search this Thread
 
Old 11-20-2016, 09:49 PM
  #1  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
FS: ZZP 2.2/2.4 supercharger kit, spare m62, pulley, hub

First up is a ZZP supercharger kit for the 2.2/2.4. Kit was purchased new and was only used for appx 1k miles. Blower, lsj throttle body, and manifold were purchased used with appx 70k on them. Kit comes complete with everything listed on the zzp site.....I made a harness for the I/c pump to make it easier for install....I also used the LSJ intercooler pump bracket and hoses instead of the stuff zzp sent. Kit comes with 60lbs injectors, 3.1 pulley. Only things you will need are a tune and some colder spark plugs.

Asking 1000 o.b.o....plus shipping. Due to all the stuff there will probably be 2 or 3 boxes being sent.

Next up is an M62. bought this as a spare to polish...got about half way through and lost interest. There is no oil in this one, so you will need oil. SCIP port has also been tapped and plugged since the 2.2 doesn't use that sensor. Does already have a ZZP modular hub on it...can include a pulley for the right price. I have never run this blower, but everything appears to be in good condition.

asking 125 o.b.o. plus shipping

Next up is a zzp 2.9 pulley.......SOLD

Hub and pulley 35 shipped........hub and 2.8 SOLD
pulley 20 shipped

Any questions feel free to shoot me a message.
Attached Thumbnails 20161119_161048_resized.jpg   20161119_161118_resized.jpg   20161119_161131_resized.jpg   20161119_164608_resized.jpg   20161119_164631_resized.jpg  

20161119_165226_resized.jpg  

Last edited by Sunburst_SS; 11-29-2016 at 09:16 PM.
Sunburst_SS is offline  
Old 11-21-2016, 09:29 AM
  #2  
Member
iTrader: (2)
 
jmix's Avatar
 
Join Date: 11-03-14
Location: Virginia
Posts: 287
Received 11 Likes on 11 Posts
I'd like to get the 2.9 hub and pulley. Pm sent.
jmix is offline  
Old 11-21-2016, 12:35 PM
  #3  
New Member
 
CobiJack's Avatar
 
Join Date: 10-27-16
Location: INDIANA
Posts: 106
Likes: 0
Received 1 Like on 1 Post
Do you have the bypass or any of the plugs for the halfway polished m62?
CobiJack is offline  
Old 11-21-2016, 01:14 PM
  #4  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by CobiJack
Do you have the bypass or any of the plugs for the halfway polished m62?
Yes, i have the bypass. Which plugs are you talking about?
Sunburst_SS is offline  
Old 11-21-2016, 01:37 PM
  #5  
New Member
 
CobiJack's Avatar
 
Join Date: 10-27-16
Location: INDIANA
Posts: 106
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Sunburst_SS
Yes, i have the bypass. Which plugs are you talking about?
Pressure sensor, the black one just after the throttle body
CobiJack is offline  
Old 11-21-2016, 01:45 PM
  #6  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by CobiJack
Pressure sensor, the black one just after the throttle body
No, do not have it. I tapped and plugged that hole.
Sunburst_SS is offline  
Old 11-22-2016, 11:13 AM
  #7  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Bump
Sunburst_SS is offline  
Old 11-22-2016, 09:39 PM
  #8  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump bump
Sunburst_SS is offline  
Old 11-23-2016, 04:43 PM
  #9  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Bump
Sunburst_SS is offline  
Old 11-24-2016, 10:13 AM
  #10  
New Member
 
CobiJack's Avatar
 
Join Date: 10-27-16
Location: INDIANA
Posts: 106
Likes: 0
Received 1 Like on 1 Post
Originally Posted by Sunburst_SS
No, do not have it. I tapped and plugged that hole.
How plugged? Is it unpluggable?
CobiJack is offline  
Old 11-24-2016, 05:46 PM
  #11  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by CobiJack
How plugged? Is it unpluggable?


Drilled, tapped, and pipe plug. You can take the plug out, not sure if the SCIP sensor will seal properly though
Sunburst_SS is offline  
Old 11-24-2016, 06:21 PM
  #12  
Senior Member
iTrader: (1)
 
Sharkey's Avatar
 
Join Date: 10-27-07
Location: Abbotsford BC, Canada
Posts: 5,683
Received 263 Likes on 222 Posts
you could put a pipe thread to hose barb fitting in there and run a piece of hose to the sensor
Sharkey is offline  
Old 11-26-2016, 08:24 PM
  #13  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Bump
Sunburst_SS is offline  
Old 11-28-2016, 08:31 PM
  #14  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Bump
Sunburst_SS is offline  
Old 11-29-2016, 09:16 PM
  #15  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 11-30-2016, 11:06 AM
  #16  
Member
iTrader: (2)
 
thewafflesareburnt's Avatar
 
Join Date: 05-15-15
Location: Boise, Id
Posts: 250
Received 8 Likes on 8 Posts
Pm'd
thewafflesareburnt is offline  
Old 11-30-2016, 10:25 PM
  #17  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 12-03-2016, 10:51 PM
  #18  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 12-06-2016, 10:20 PM
  #19  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
buy this stuff
Sunburst_SS is offline  
Old 12-14-2016, 10:57 AM
  #20  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 12-15-2016, 10:10 PM
  #21  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 12-18-2016, 11:58 AM
  #22  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 12-25-2016, 11:07 PM
  #23  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
bump
Sunburst_SS is offline  
Old 12-25-2016, 11:18 PM
  #24  
Member
iTrader: (1)
 
bubba_jay's Avatar
 
Join Date: 11-17-09
Location: North Carolina
Posts: 251
Likes: 0
Received 6 Likes on 5 Posts
bump for a cool guy. He sends cookies and fruit roll ups when you buy his stuff!! :P
bubba_jay is offline  
Old 12-27-2016, 07:47 PM
  #25  
Senior Member
Thread Starter
 
Sunburst_SS's Avatar
 
Join Date: 04-08-06
Location: Charlotte, NC
Posts: 2,397
Likes: 0
Received 3 Likes on 3 Posts
Originally Posted by bubba_jay
bump for a cool guy. He sends cookies and fruit roll ups when you buy his stuff!! :P
Haha thanks man!
Sunburst_SS is offline  



All times are GMT -4. The time now is 05:36 AM.