09 SS/TC, hesitation / ABS issue ???
10-23-2017, 11:23 AM
#4
This may sound weird but add:
A couple things I would double check:
Purge Valve Selenoid
Intake and Exhaust Camshaft actuators
I had a bad hesitation in upper RPMs like I was hitting a gust of wind. My actuators were very dirty and fixed my issue when replaced.
Not saying that's your issue, but I seem to remember the actuators randomly setting T/C or ABS light for a few people.
Really need codes to determine a good path to fixing.
A couple things I would double check:
Purge Valve Selenoid
Intake and Exhaust Camshaft actuators
I had a bad hesitation in upper RPMs like I was hitting a gust of wind. My actuators were very dirty and fixed my issue when replaced.
Not saying that's your issue, but I seem to remember the actuators randomly setting T/C or ABS light for a few people.
Really need codes to determine a good path to fixing.
10-24-2017, 12:16 PM
#6
New Member
Thread Starter
Join Date: 06-19-06
Location: Ont, Canada
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
No codes, just a cold air intake. Both rear wheel bearings just replaced, fronts were done a couple of yrs. ago.
Brought to 4 different garage's incl. dealer, no one seems to know what's wrong with it.
Had the valve's scoped and look dirty. Brand new pads and rotors 2 yrs. ago, brand new rear calipers 1 yr ago.
Brought to 4 different garage's incl. dealer, no one seems to know what's wrong with it.
Had the valve's scoped and look dirty. Brand new pads and rotors 2 yrs. ago, brand new rear calipers 1 yr ago.
