2.0L LNF Performance Tech 260hp and 260 lb-ft of torque Turbocharged tuner version.

Treadstone Performance LNF Bolt on's, and Stage Kits

Thread Tools
 
Search this Thread
 
Old Oct 19, 2010 | 10:07 PM
  #1  
Treadstone's Avatar
Thread Starter
Former Vendor
iTrader: (2)
 
Joined: 08-30-07
Posts: 352
Likes: 0
From: Miami
Treadstone Performance LNF Bolt on's, and Stage Kits

Treadstone Stage Kits-Included in this package is a map that will allow you to run 20psi low boost, and 25psi high boost with the flick of a switch!
-This will come with a Trifecta cable, if you return the cable, we will credit you $200 from purchase price. Or you can keep the cable for future tuning and re-mapping.
Trifecta tuning: With our tuning options from Trifecta, each map is custom tailored to your vehicle and set up. Atmospheric conditions, changes in bolt on products you may have, are all taking into consideration. We can specify target boost levels, map switching, and even boost per gear for those wanting to run lower boost levels in 1st or 2nd gear.

-Trifecta licenses are $310, and cables are $200. We sell Trifecta Licenses and email tuning sessions for $310, call us up for any Trifecta Tuning needs, we are an authorized dealer for them....

All LNF Parts are 15% of retail price for a limited time!

Stage 1 $770
  • Custom Trifecta Tune
  • Trifecta OBD2 Cable
  • Treadstone Cold Air Intake


Stage 2 starting at $1495
  • Custom Trifecta Tune
  • Trifecta OBD2 Cable
  • Treadstone Cold Air Intake
  • Treadstone Catback Exhaust System
  • Treadstone Catless Downpipe


Stage 3 Starting at $2495
  • Custom Trifecta Tune
  • Trifecta OBD2 Cable
  • Treadstone Cold Air Intake
  • Treadstone Catback Exhaust System
  • Treadstone Catless Downpipe
  • Treadstone Front Mount Intercooler Kit
  • Turbosmart Blow off Valve, with OEM Block of PLate


Stage 4 kit
Precision 5857 Ceramic Ball Bearing Turbocharger
Turbonetics Cast 304 Tubular Manifold
Turbosmart Wastegate
304 Stainless Downpipe/Dump tube
Starting at $2000
Approx release date 2 months.....



Treadstone Cold Air Intake, $280
Powder Coated Black, 3" Mandrel Bent Aluminum, Intgrated MAF sensor...


Treadstone Catback Exhaust System, Starting at $325
Fully customizable, no muffler, resonator, Stainless, Aluminized


Front Mount Intercooler Kits, starting at $740
Black Powder Coating, Turbosmart BOV Flange, 500hp Intercooler


Treadstone Catless Downpipe, $299.95
Highest Quality downpipesyou can buy, made in the USA!


OEM Diverter Block off Plate $39.95
Used when running an external blow off valve


Treadstone Radiator Hoses $72
Available in blue black or red, perfect for dressing up your engine bay and silicone color matching!



Stage 4 Turbo Manifold, soon to be released!
304 Stainless Cast Tubular Manifold..


You can contact us directly at 888-789-4586
Treadstone Performance Inc, Turbo Kits, Intercoolers, Turbo manifolds, Silicone hose
Reply
Old Oct 19, 2010 | 10:27 PM
  #2  
RYRO14's Avatar
Senior Member
iTrader: (1)
 
Joined: 10-27-08
Posts: 1,754
Likes: 2
From: Lithia, FL
Nice cant wait for that turbo kit to come out!
Reply
Old Oct 19, 2010 | 10:28 PM
  #3  
09sscalicobalt's Avatar
Senior Member
iTrader: (1)
 
Joined: 01-07-10
Posts: 10,914
Likes: 2
From: ca all day
damn thats a good deal heard good stuff about you guys so far just wish the intake was carb aproved california sucks
Reply
Old Oct 19, 2010 | 11:08 PM
  #4  
Chandler's Avatar
Member
 
Joined: 12-03-08
Posts: 335
Likes: 0
From: Nashville,TN
Curious: what defects does the stock manifold have that would lead you to make a new design?
Reply
Old Oct 19, 2010 | 11:32 PM
  #5  
Wangspeed's Avatar
Senior Member
iTrader: (2)
 
Joined: 10-22-09
Posts: 3,145
Likes: 2
From: Northern Virginia
Isn't this what the vendor forum is for? You guys have already made multiple posts on this forum, which isn't even a marketplace forum. It was interesting the first time when you made the initial announcement, now it's getting annoying.
Reply
Old Oct 20, 2010 | 12:11 AM
  #6  
dncalvillo2's Avatar
Banned
 
Joined: 09-04-09
Posts: 163
Likes: 0
From: Rio Grande Valley, Tx
^^^Buzkill!

what kind of numbers are you guys expecting for the stage 4 kit?
Reply
Old Oct 20, 2010 | 12:51 AM
  #7  
Chandler's Avatar
Member
 
Joined: 12-03-08
Posts: 335
Likes: 0
From: Nashville,TN
^^
not really, if the guy wants to put a flame to a company for asking someone to spend that kind of money , this is the place to do it.IMHO
Reply
Old Oct 20, 2010 | 01:10 AM
  #8  
dncalvillo2's Avatar
Banned
 
Joined: 09-04-09
Posts: 163
Likes: 0
From: Rio Grande Valley, Tx
hey we should welcome all vedors. they're puting the time and effort into our cars and when they release new stuff wouldnt you want to know about it ASAP? i would. so i like that they post here cuz honestly how much do you look at the vendor pages?
Reply
Old Oct 20, 2010 | 01:23 AM
  #9  
09BlueBaltSS's Avatar
Senior Member
 
Joined: 05-13-09
Posts: 2,951
Likes: 0
From: Davie, Fl
Originally Posted by Chandler
Curious: what defects does the stock manifold have that would lead you to make a new design?
That manifold is for the turbo swap. Not the stocker


Id rather them post it here. I dont normally go looking in the vendor section. Thanks Treadstone!!
Reply
Old Oct 20, 2010 | 09:47 AM
  #10  
blackvette101's Avatar
Junior Member
 
Joined: 09-27-08
Posts: 436
Likes: 0
From: delray beach, florida
do you have to remove the crash beam with that big intercooler
Reply
Old Oct 20, 2010 | 10:25 AM
  #11  
Treadstone's Avatar
Thread Starter
Former Vendor
iTrader: (2)
 
Joined: 08-30-07
Posts: 352
Likes: 0
From: Miami
Originally Posted by 09BlueBaltSS
That manifold is for the turbo swap. Not the stocker



Id rather them post it here. I dont normally go looking in the vendor section. Thanks Treadstone!!

yes, thats why we post here, who looks at a vendor section when a company is just releasing new parts.

The stock manifold is restrictive and not capable of supporting over 400whp efficiently. Ours will have larger runners, and is able to support much larger turbos, up to 67mm compressor wheels.
Reply
Old Oct 20, 2010 | 10:26 AM
  #12  
Treadstone's Avatar
Thread Starter
Former Vendor
iTrader: (2)
 
Joined: 08-30-07
Posts: 352
Likes: 0
From: Miami
Originally Posted by blackvette101
do you have to remove the crash beam with that big intercooler
You do not have to remove the crash been with either of the intercooler options. If you wanted to run a 4.5" Thick TR1245 intercooler then you would.
Reply
Old Oct 20, 2010 | 10:43 AM
  #13  
BooSSted's Avatar
Senior Member
iTrader: (3)
 
Joined: 11-07-05
Posts: 3,247
Likes: 0
From: Bantario
Hey Jason, I e-mailed you back last night.
Reply
Old Oct 20, 2010 | 12:30 PM
  #14  
kidcrash603's Avatar
Senior Member
iTrader: (2)
 
Joined: 10-12-08
Posts: 1,617
Likes: 0
From: Manchester, NH
It's interesting that it's $80 MORE to buy a stage 2 kit than it would be to buy the pieces in the kit individually...

and all the pieces in the Stage 3 kit would cost $2195 individually, except the blow off valve isn't listed here, so that means that BOV would cost $300?

I'm excited that there are more companies offering options for our cars, and I understand that innovation costs money, but some of this pricing is confusing to me.
Reply
Old Oct 20, 2010 | 12:33 PM
  #15  
cardelino18's Avatar
Senior Member
iTrader: (3)
 
Joined: 10-15-08
Posts: 2,637
Likes: 0
From: florida
Originally Posted by dncalvillo2
^^^Buzkill!

what kind of numbers are you guys expecting for the stage 4 kit?
we are working on the tuning... hopefully this week well be done with tuning and post up the #s and chart... expecting ~450+/-...
Reply
Old Oct 20, 2010 | 01:53 PM
  #16  
dncalvillo2's Avatar
Banned
 
Joined: 09-04-09
Posts: 163
Likes: 0
From: Rio Grande Valley, Tx
sounds good! keep up the good work. im in it to see what results you guys get. very interested in upgrading my turbo.

Originally Posted by cardelino18
we are working on the tuning... hopefully this week well be done with tuning and post up the #s and chart... expecting ~450+/-...
Reply
Old Oct 20, 2010 | 02:04 PM
  #17  
ramrod1337's Avatar
Senior Member
iTrader: (1)
 
Joined: 06-19-10
Posts: 4,098
Likes: 0
From: dayton ohio
how much are the kits without the trifecta
Reply
Old Oct 20, 2010 | 03:44 PM
  #18  
RYRO14's Avatar
Senior Member
iTrader: (1)
 
Joined: 10-27-08
Posts: 1,754
Likes: 2
From: Lithia, FL
Originally Posted by Wangspeed
Isn't this what the vendor forum is for? You guys have already made multiple posts on this forum, which isn't even a marketplace forum. It was interesting the first time when you made the initial announcement, now it's getting annoying.
If you have problems with vendors posting products for SS/TC's in the the SS/TC section you have problems. Who the hell ever goes to the vendor sections anyways? They have much more audience in this section and Treadstone knows that. Dont get so butthurt about it.
Reply
Old Oct 20, 2010 | 03:52 PM
  #19  
SuperchargedSS's Avatar
Senior Member
 
Joined: 09-07-05
Posts: 3,532
Likes: 0
From: Canada
Originally Posted by Wangspeed
Isn't this what the vendor forum is for? You guys have already made multiple posts on this forum, which isn't even a marketplace forum. It was interesting the first time when you made the initial announcement, now it's getting annoying.
Oh shuddup.
Reply
Old Oct 20, 2010 | 04:19 PM
  #20  
wantedSS/TC's Avatar
Senior Member
iTrader: (1)
 
Joined: 02-25-09
Posts: 11,759
Likes: 0
From: Aston, PA
Originally Posted by kidcrash603
It's interesting that it's $80 MORE to buy a stage 2 kit than it would be to buy the pieces in the kit individually...

and all the pieces in the Stage 3 kit would cost $2195 individually, except the blow off valve isn't listed here, so that means that BOV would cost $300?

I'm excited that there are more companies offering options for our cars, and I understand that innovation costs money, but some of this pricing is confusing to me.
Vendor bashing?

You know what that gets ya.

Let them offer their products.
Reply
Old Oct 20, 2010 | 04:24 PM
  #21  
Treadstone's Avatar
Thread Starter
Former Vendor
iTrader: (2)
 
Joined: 08-30-07
Posts: 352
Likes: 0
From: Miami
basically, are adding $500 to the price of any Stage Kit and that includes a Trifecta Cable, and License.
You can subtract this amount from any stage kit, if you are already a Trifecta user.
So, stage 1 kit is just a cold air intake $270
Stage 2 is actually DP $300, CAI, $270, Catback $425 =- $995, add Trifecta gives you $1495

If you return the cable, you get $200 back on any stage kit.
Reply
Old Oct 20, 2010 | 04:26 PM
  #22  
ramrod1337's Avatar
Senior Member
iTrader: (1)
 
Joined: 06-19-10
Posts: 4,098
Likes: 0
From: dayton ohio
says catback is starting at 325 what is this? that would make the stage 2 without trifecta like 900
Reply
Old Oct 20, 2010 | 04:29 PM
  #23  
ramrod1337's Avatar
Senior Member
iTrader: (1)
 
Joined: 06-19-10
Posts: 4,098
Likes: 0
From: dayton ohio
how much to combine stage 3 and stage 4 when it comes out?
Reply
Old Oct 20, 2010 | 05:33 PM
  #24  
kidcrash603's Avatar
Senior Member
iTrader: (2)
 
Joined: 10-12-08
Posts: 1,617
Likes: 0
From: Manchester, NH
Originally Posted by Treadstone
basically, are adding $500 to the price of any Stage Kit and that includes a Trifecta Cable, and License.
You can subtract this amount from any stage kit, if you are already a Trifecta user.
So, stage 1 kit is just a cold air intake $270
Stage 2 is actually DP $300, CAI, $270, Catback $425 =- $995, add Trifecta gives you $1495

If you return the cable, you get $200 back on any stage kit.
Thanks for the somewhat clarification. I'm not bashing, regardless of what others may have posted.

I'm genuinely confused on some of the prices but I guess I can take that to PM.
Reply
Old Oct 20, 2010 | 06:58 PM
  #25  
joeyjetta46's Avatar
Banned
 
Joined: 11-11-08
Posts: 655
Likes: 0
From: somewhere in the world
Wangspeed if u dont like it dont read the thread, its pretty simple, go cry in "The Lounge" because ur opinon doesnt matter here
Reply



All times are GMT -4. The time now is 07:40 AM.