Hmmn, are there any threads anywhere regarding this?
|
Originally Posted by 574
(Post 6433983)
Aren't you worried about running a 2.6???
|
Haha no. I'd be worried about the heat.
|
Originally Posted by 574
(Post 6434637)
Haha no. I'd be worried about the heat.
|
Originally Posted by tylerjclance
(Post 6434514)
I understand how it can create a vacuum leak, i just don't understand why zzp would sell it, or why it would even be made in that case.
Originally Posted by Dontstoprunning
(Post 6434493)
How many of you guys are running a catch can?
Originally Posted by advise
(Post 6434604)
its not that it doesnt work yours in not installed correctly
you should remove the breather filter and run a catch can or remove the breather line and run just the filer either way the filter still wont because the pcv in the head to run that breather you need to plug the pcv port in the head and plug the valve cover and the intake |
oh HAI missed this thread :/ been turning six days a week though. And the whole E85 vs my race gas tune on which is better will be put to bed very shortly :)
|
Originally Posted by TStone
(Post 6434632)
What's there to be worried about? :) Losing control?
|
funny im going to be putting my 2.6 on as well but eh ill update the times i run compared to the 2.7. But agreed the tune better be spot on and i run a ton of meth
|
and dont tell me yall missed my thread on the zzp phenolic spacer ??
https://www.cobaltss.net/forums/2-0l...ry-lsj-259817/ |
Originally Posted by zrated89
(Post 6434729)
oh HAI missed this thread :/ been turning six days a week though. And the whole E85 vs my race gas tune on which is better will be put to bed very shortly :)
|
Originally Posted by zrated89
(Post 6434752)
and dont tell me yall missed my thread on the zzp phenolic spacer ??
https://www.cobaltss.net/forums/2-0l...ry-lsj-259817/ |
Originally Posted by mrbelvedere
(Post 6434730)
that much heat and pressure and a few degrees of knock and youll have a nice smoke show
|
i hear ya my car has taken a back seat to work and vagina lol. and possibly moving as well. ( the spacer is def one of the better cooling mods though for sure ) you like how i did that lol
|
Originally Posted by TStone
(Post 6434814)
Maybe the should make a device that reads knock..... hmmmm... that way you could keep an eye on things.. and like I said, temps are pretty much under control
|
he was being sarcastic man lol
|
Originally Posted by zrated89
(Post 6434741)
funny im going to be putting my 2.6 on as well but eh ill update the times i run compared to the 2.7. But agreed the tune better be spot on and i run a ton of meth
Originally Posted by zrated89
(Post 6434752)
and dont tell me yall missed my thread on the zzp phenolic spacer ??
https://www.cobaltss.net/forums/2-0l...ry-lsj-259817/
Originally Posted by TStone
(Post 6434814)
Maybe the should make a device that reads knock..... hmmmm... that way you could keep an eye on things.. and like I said, temps are pretty much under control
Originally Posted by zrated89
(Post 6434822)
he was being sarcastic man lol
|
My recommendation to this thread
CAM IT, REV IT, FUCK IT kthxbai (>x_x)^ |
i will agree most people shouldnt run that small of a pulley. Hell on my 12.1 pass the dipstick did come up a **** hair, but that was back to back pulls. Comp is still perfect across the board and before i do the 2.6 i will have a CORRECTLY setup breather setup with a catch can. But in the end i really need to port the head add cams and valve springs with the balance shaft delete and call it a day, BUT if i do that i will need to weld a roll cage in the car and since shes my DD really aint feeling it lol
Originally Posted by 100% METH
(Post 6434831)
My recommendation to this thread
CAM IT, REV IT, FUCK IT kthxbai (>x_x)^ |
Originally Posted by mrbelvedere
(Post 6434730)
that much heat and pressure and a few degrees of knock and youll have a nice smoke show
But as for right now, a 2.6/tvs makes for a decent car for a 17 year old to drive back and forth to high school so I'm content :) ...... for now |
Originally Posted by Dontstoprunning
(Post 6418599)
http://i1232.photobucket.com/albums/..._5002608_n.jpg
http://i1232.photobucket.com/albums/...592468_n-1.jpg http://i1232.photobucket.com/albums/...0/DSC00964.jpg |
thought the car looked familiar lmao
|
<still needs an interceptor or 3 :lol:
now so that im not just whoring this thread some tvs related info Unfinished TVS power(i miss it sooo much!!! :cussing:) compared to Bone Stock with a Raised Limiter(TQ Mngt is untouched which is why the boost drops off) http://img546.imageshack.us/img546/7...sstock1.th.jpg http://img190.imageshack.us/img190/7...stock10.th.jpg same logs just one has almost no smoothing, the other has the most smoothing stock feels so disgustingly slow now i hate it. 70hp and 60tq is a huge difference :( |
When are you putting your TVS back on Rootbeer?
|
when i get an income and replace the bearings
and depending on that income, maybe after i get a single pass IM and an phenolic spacer |
Originally Posted by 07MetallicSC
(Post 6434852)
Banned under one name to create another? Rossshady120
|
All times are GMT -4. The time now is 05:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands