elecblue06

iTrader: (1)

2.4L ecotec 5spd

go fast mods:

zzp header with 1.75" primaries and 3" dp
tsudo catback
SMP ecotec R&D procharger supercharger kit with 3.2" pulley (8-10 lbs no i'm not sure my boost gauge was on back order)[60s for fueling and full FMIC setup for cooling)
obviously tune by trifecta

I'll be hitting the dyno hopefully on the 9th in ct on a superflow dyno for a dyno day so i'll have cars to compare it to as well

with the tune I had before ( 10.2 or so on the low end at wot slowly ending up at 11.1) i cream ss/sc's lol

_UnLiMiTeD_

When u going to the dyno? Im guessing witha proper tune at the boost u listed, around 250

06_ion2

199 isnt a option.

brickerenator

i say 260

i'd love for it to be higher

elecblue06

iTrader: (1)

the tune will be finished for the dyno i hope .. i dont have access to a laptop but my gf does in ct so hopefully I can get it dialed in before then .. right now it's still rich but it's running 10.8 across the board instead of low 10s then slowly ramping up to low 11's

06ion2coup

260-280 cause a 2.2 with a good ammount of boost can hit around 240-250 idk i want you to be in the 260-280 range lol

elecblue06

iTrader: (1)

me too but i honestly dont see it happening.. I want to race my friend in an ss/tc though lol that'll give me a ball park.. if i walk him .. maybe it is possible

95cam86roc

Ima say 240ish

_UnLiMiTeD_

so when you going to turn the boost up for some 300whp pulls and track times

elecblue06

iTrader: (1)

haha well i need a clutch first lol .. right now i'm running stock one.. and somehow it's holding find lol

EatonTVS07

iTrader: (4)

i want to see what kinda torque numbers you put down

~Mike~

iTrader: (2)

I'm gonna throw my guess in at 235 give or take a little. Cuz you can roughly figure about 9-10 hp per psi and the exhaust work is prolly worth about 15whp(just estimating) So...140+15+78.5=233.5 Like i said tho, total guess...

EDIT: I'm retarded lol re-do on the numbers....155+15+78.5=248.5 I wasn't paying attention to the fact it's a 2.4 not a 2.2 lol

06_ion2

i see fail your axels will break on the dyno because u get traction on there.

EatonTVS07

iTrader: (4)

this is a 3rd gear pull not a 1/4 mile launch

_UnLiMiTeD_

whoa wait, ur clutch still holds? ok my new guess is 180 lol.

elecblue06

iTrader: (1)

haha you have to remember prochargers bulid boost progressively .. and i've destroyed 2 ss/sc's so it's over 200 lol

hehe yea i added that in because someone put 200-220 so i figured they were thinking 2.2 even though it's in the 2.4 section

KyleMinnis

im think up there with the ss/tc...imo

elecblue06

iTrader: (1)

post up what you guys think my numbers will be and maybe i'll give someone a cookie or something if they're right

_UnLiMiTeD_

256/249 thats my guess

~Mike~

iTrader: (2)

I stick with the numbers I said...248-250ish Switch over to a full exhaust, maybe hit 265...now go dyno and prove me wrong lol

EatonTVS07

iTrader: (4)

256hp and 253tq

~Mike~

iTrader: (2)

Who voted 280+?? That's not gonna happen....

elecblue06

iTrader: (1)

i has full exhaust lol

wesg631

im thinkn 273

~Mike~

iTrader: (2)

then wtf is a tsudo cat-back? i ain't never heard of such a thing before this site...