Biohazard had side exit exhaust on for awhile with a tip like that, was sweet looking but never heard it.

I dont know whats going on guys, i uploaded this video around 10pm and its now midnight and its still not working... must be its still waiting to be approved... dont give up guys.... it will come.

Thanks guys for the comments, I love the tips, I hope they come soon so i can post some pix..

later

I want to hear it under load. Not nearly as drastic as I thought it would be. Maybe it'll be different in person. How's the mounting going? You gonna be able to get those steady and mounted high enough?

Workin on the side mounts right now and pix, and hopefully a underload video by tonight.... if we ever do anything again maybe u will get to hear it...lol.. DD this friday?

later

It's a possibility, depends on weather. You know Pinks will be at Lebanon Fri/Sat, right?

I'm up for meeting up sometime, definately. I'll check w/ Katie about Fri night...

Check out my thread? I got the exhaust finished up!!!

I'll watch when I get home. I like this setup! looks cool.

Yea I know, I was thinkin of going out Saturday but I have to be at work by 5pm at the latest. Do u know what time it starts and other details? Friday nights have been i blast lately, hopefully the weather is good like its been the past few weeks...eww just looked at the weather and it says rain and 50's for Friday and Saturday... i hope that changes..but the week after looks really good! I finished the dual side exhaust, im just waiting for some JB weld type stuff to cure(4-6 hours, its been 2 hours) and then i will take some pix and a video. I have some temporary exhaust tips on it now, just a angle tip thats tilted down slightly until i get my rectangle ones... Im soo excited to go drive it... havent driven it all day due to a nail in the tire and I just got that fixed today. Wheres it at, i havent seen anything yet.

O yea here are a couple of pix right after I mached(sp?) it up and before it got welded and ceramic coated. Then my buddy is suppose to wrap it for me.
https://www.cobaltss.net/gallery/fil...8/night065.jpg
https://www.cobaltss.net/gallery/fil...8/night066.jpg


later

Where upstate are you? I'm in the colonie area, between schenectady and albany.

personally if i did this i would go passenger side for the simple fact that the way you have it now when your on the highway next to a wall all that noise is going to bounce right back off the wall into your car & be annoying.

Bad news bears... lol
 

Exit 29 off 90 in Canajoharie. I think u came out to that Whips and Wings one time when me and eDubs were there.

How about passengerside and driverside.... thats how i did it.

Got some bad news guys... took it out for a ride... that shitty "Liquid Weld" shitt "JB Weld" crap that i used to seal up a couple cracks.... blew right apart and is stinking like a biotch. Ill have to see about getting them welded up..... ahh the smell made me so sick... and the exhaust leaks.... eww...

later

its different, i like it though. you should get make it so it goes through the sideskirt though, that would be badass

yea it would but.... more $$$. lol

later

Sweet. Yeah I think I went to one of the whips and wings, I drive a red 07 ss s/c with the low rise and polished 18's.

Yeap.... and there was like a white prelude or something with u...

later

Not a fan unless it's on a truck, but it looks nice

Not too bad... I don't really hear a difference between that & stock except the appearence. But I would put them up into the side skirt when you have money or whatever. But... dual exhausts FTW!!!

Also, the JB Weld, works like a charm, but I normally let it sit for 24 hours not moving whatever I am JB Welding... I think 6 hours is too little time...

Thanks man, but the 1 spot where i used JB weld sat for almost 36 hours the other spot only sat for like 3 or 4 hours. The crap was rock hard and it just blew apart... errr. Any suggestions? And setting the exhaust in the side skirt would be nasty.. just gotta make it sound good 1st ... and figure out how to seal up the rear bumper.

later

Update... Vid and pix
 

I got the entire exhaust rewelded and some custom hangers made today so im like 80% done. I just need for my new tips to come in and possibly wrap the exhaust. So here are the pix with the temporary exhaust and a couple vids.. one under load.. one not.. Anyways lmk what u guys/ gals think.

http://www.youtube.com/watch?v=PsNrr8Z_Wbo

http://www.youtube.com/watch?v=TbPKgVKoLjs

http://a122.ac-images.myspacecdn.com...e62710c759.jpg
http://a237.ac-images.myspacecdn.com...0cd3c49684.jpg
http://a772.ac-images.myspacecdn.com...c3ced3d193.jpg
http://a287.ac-images.myspacecdn.com...813e60f16e.jpg


later

Looks like it's hangin' well. I'll take a look at the vids a little later.

How's it sound? Also, how's the big empty exhaust cutout in your rear bumper look?

It looks like it hangs really low depending on where ur standing. I took it over speed bumps and crap and it doesnt hit or scrap. Doesnt sound bad, a lil loud, lil rumbly.

As far as the hole in the back... i gotta figure out how to get it filled or find a rear bumper i like off a body kit...

later

are you lowered? had a request to do this to my pursuit. but i am dropped 2" already....

please output through skirt thx

No im not lowered but I am lower then other ss/sc cobalts for some weird reason. Ill measure from the ground to the bottom of the exhaust to see exactly how much clearance I got.

https://www.cobaltss.net/gallery/fil...llianss004.jpg

There really isnt enough room to put it thru the side skirt u unless i had a custom skirt made and then I would need more bends in the piping.

later

Yeah sideskirt is impossible to work through. You're better off riveting a polished SS plate to the skirt and mounting the tips just below it. That's what I was thinking off when I had contemplated running a dual exit before the wheels...

Good idea... i could get a S/S plate for cheap and some stainless rivets too... hmm.. nice idea. We will have to talk about this tonight.. :) Maybe cut a arch in the side skirt and the S/S plate so the tips would be up closer to the body.... for a tighter fit/ look....

later