HELP, I need F35 tranny diagram...
#1
Senior Member
Thread Starter
Join Date: 11-09-04
Location: Minnesota
Posts: 9,440
Likes: 0
Received 0 Likes
on
0 Posts
HELP, I need F35 tranny diagram...
Does anyone have good GM diagrams / images of the F35 transmission? Mine is leaking and before I start trying to fix things I like to have a GM diagram.
I know some of you guys can get this info off your GM computers, please help
I know some of you guys can get this info off your GM computers, please help
#7
New Member
Join Date: 04-11-13
Location: Cheyenne, Wyoming
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
F35 Diagram
hey brother, did you ever get a hold of the diagram? i'm trying to find it too and it's pretty hard to come by.
#9
New Member
Join Date: 04-11-13
Location: Cheyenne, Wyoming
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
its leaking trans fluid. i just got underneath her yesterday and saw where it was coming from. so i'd like to see some parts and see what i may need for a reseal
#13
New Member
Join Date: 04-11-13
Location: Cheyenne, Wyoming
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
It seemed to be leaking from one of the bolts just below the transmission fluid drain plug. I'm not too savvy on this area but it seemed weird to be coming from there. I unscrewed it and there was fluid all along the bolt. And it didn't seem like it was the right bolt for the job. All the other bolts were regular hexagonal, 1/2 I believe. This one was a torque bolt or something. Seemed to be the same size and all. But at any rate, I just swapped one of the hexagonal bolts in its place. Doubt that will work but it seems to have worked so far.
I'd like a diagram showing the innards, seals, and possibly some part numbers so I can begin to diagnose the issue
I'd like a diagram showing the innards, seals, and possibly some part numbers so I can begin to diagnose the issue
#15
New Member
Join Date: 04-11-13
Location: Cheyenne, Wyoming
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
is there a document to go with it that lists each part in reference to the number in the diagram? it's pretty intricate but it seems like i'm look at 46. it's a screw of some sort. close to the one that i found the leak coming from
#17
New Member
Join Date: 01-22-21
Location: East coast pennsylvania
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
#18
Senior Member
Here ya go
The following 2 users liked this post by Kolt:
GroupA242 (01-07-2023),
USMCFieldMP (01-22-2021)
#19
F35 Output shaft parts
Synchronizer 1 gear (16), and 2 gear (10). Should goes in the same way? When I assembly gearbox I was thinking it can be mistake. Do not remember how I made it. After assembly my 1 gear synchronizer doesn't work correctly. Now I bought new one and I will change it. In other cars with F35 It goes diffrent.
Synchronizer 1 gear (16), and 2 gear (10). Should goes in the same way? When I assembly gearbox I was thinking it can be mistake. Do not remember how I made it. After assembly my 1 gear synchronizer doesn't work correctly. Now I bought new one and I will change it. In other cars with F35 It goes diffrent.
Last edited by Yet; 01-26-2021 at 06:40 PM.
Thread
Thread Starter
Forum
Replies
Last Post