TurboTechRacing

iTrader: (24)

KY Clutch and Turbo Tech Racing teamed up to bring the best clutch kits to the market!






KY is gathering photos now, we will upload each one, to each product as we receive.



Full Face Disc Topic:
KY will not currently be offering a full face disc option for the Stage 2, 3, and 4. Reason being is as stated in the "interest thread" the pressure per SQ IN, on a full face disc is so much less than a puck design. A full face disc option on a high torque application will not hold properly. As to why there is not one on the market today.

Please also reference this post (Start at #53):
https://www.cobaltss.net/forums/driv...65/index3.html



Product Links, with Prices and Descriptions:
KY Clutch Kits - Turbo Tech Racing, LLC





If you would order, please post in this thread in which you did order.

07SSYellow

iTrader: (7)

awesome

Dart_SI

iTrader: (1)

What about an 8 puck? Just suggesting stuff.

Chevycobaltss3

iTrader: (2)

Lol anxious waitiing on pictures lol haha . I'm just kidding. I'm glad were close . Order up. TTR ftw..

TurboTechRacing

iTrader: (24)

Sure we can ask but 6 is most common IMO.

Chevycobaltss3

iTrader: (2)

This is part of the full disc design with pucks. I may try t get a steam boat rolling on this but the issue is material costs. So we are gonna try

vahdyx

iTrader: (7)

I don't think I want one.

Unless this happens

Chevycobaltss3

iTrader: (2)

Vadhyx, no one makes a full face design that'll hold the Tq. Which is why pucked style is preffered, we are gonna try our best though.

TurboTechRacing

iTrader: (24)

This is true, KY stated it would take 4-6 months though.

Chevycobaltss3

iTrader: (2)

Uploaded with ImageShack.us

Ok here is a pic of a full faced disc that another vendor sales. main reason it went out is due to glazing because it is not meant for a high Tq load ... Once I was able to take it to ky clutch we tested it out and the material was cracking, and the rivets were coming loose. Notice the one on the cement, it is the other brand and not ky clutch. The ky clutch is the pucked style.


Most failed clutches are due to improper installs but also improper clutch ..

Dart_SI

iTrader: (1)

Glazing is due from improper break in, install, or driving, unless the clutch was rated for well below the tq the owners car is making. . And u can unglazed a clutch easily, just takes some time.

Chevycobaltss3

iTrader: (2)

Dat u are correct, which is why full faced clutches are hard to hold Tq. Now the above given example is the closest thing you will get to a full faced clutch . But that clutch setup won't hold more then 300ish ft lbs

09BlueBaltSS

Isn't zzp clutch a full face?

Chevycobaltss3

iTrader: (2)

As stated there is not one full face disc that will hold to Tq that the Lnfs put out. The clutch posted in pic above is a southbend stage three I beleive.

JacBlackSS/TC

i wonder which stage of ky i have now

TurboTechRacing

iTrader: (24)

Most likely stage 2 or 3.

3 will have ceramic on both sides, where as 2 will have kevlar on one side of the disc and ceramic on the other side.

Stage 3 will have a higher load pressure plate also.

vahdyx

iTrader: (7)

What does a Vette use? Just curious, because they can slip easily and hold a lot of Torque. All I care about is being able to slip it like ZZPs is claimed to do.

06_ion2

TOB/slave is 9k on the stage 4 2.2/2.4

chitala383

Woohoo! I'm probably gonna need a clutch by the end of the year.

Chevycobaltss3

iTrader: (2)

Because it is a twin disc clutch!

Chevycobaltss3

iTrader: (2)

And also there pressure plate clamping lbs is 2500+

Chevycobaltss3

iTrader: (2)

It all depends on year and how large the friction disc is.. what the issue is with the balts is surface area .... we have a small surface area which is why its hard to get a full face disc to hold the power.

TurboTechRacing

iTrader: (24)

Is that to much?

J.K. Thanks for pointing that out, the "." never made it in there. It is fixed now.

AndrewSS/TC

is the stage 4 just extremely annoying and thats why its not recomended for daily driving?

TurboTechRacing

iTrader: (24)

It has In OR Out engagement... It will hold whatever you throw at it though.

It can be on the street, but it will not be the most friendly at stop lights.

If you are under 475 torque, get the stage 3 and be happy