Cobalt SS LSJ 2.0 SUPERCHARGED BREAKING THE 400 WHP BARRIER!
https://cimg4.ibsrv.net/gimg/www.cob...241bed37ff.jpg
It's official! The 400whp barrier without N20 on a 2.0 LSJ has been passed! :) Original Owner - 07 Cobalt SS Supercharged Engine/Valvetrain: - Tjolley built Forged 11:1 Compression 2.0 LSJ - Tjolley Ported Head | ZZP Stage 3 Cams | Supertech #75 Springs - ATI Overdrive 6.78" | Aux Chain delete | Balance shaft delete | Oil Mains deburred Intake/Exhaust: - OTTP 3.5" SS Cold Air Intake | LS4 Throttle Body - OTTP 1.75" - 3" Long Tube | 3" - 2.5" Catless Mid Pipe | 2.25" Borla Catback Power Adder: - TVS 1320 | 2.8 Pulley Cooling: - Oversized Ebay Special Radiator | 160* F. Thermostat - Stock Intake Manifold | Stock Endplate | Tjolley custom made Griffin front mount heat exchanger - Electric Water Pump Transmission: - 07 HHR F23 Transaxle Final Drive - 4.17 1st - 3.58 2nd - 2.02 3rd - 1.35 4th - 0.98 5th - 0.69 Reverse - 3.31 FUEL: - 1200 CC FIC Injectors - Return style | Boost reference - AEM 320 LPH Fuel Pump - E85 STOCK THROTTLE BODY / STOCK LSJ INTAKE (AIR BOX MOD) VS OTTP 3.5" INTAKE & LS4 Throttle Body https://cimg5.ibsrv.net/gimg/www.cob...fc09af69e2.jpg https://cimg6.ibsrv.net/gimg/www.cob...ad4a6f5354.jpg https://cimg3.ibsrv.net/gimg/www.cob...d109dda382.jpg https://cimg2.ibsrv.net/gimg/www.cob...798074f320.jpg https://cimg4.ibsrv.net/gimg/www.cob...a8045c851b.jpg |
i want that custom griffen .... how does she feel nice a strong ?
|
Very nice, glad you put a thread together.
|
Originally Posted by yellowsupercharged06
(Post 7604365)
i want that custom griffen .... how does she feel nice a strong ?
I have the HHR 05-08 F23 trans in it It has the 4.17 final with closer ratio gearing |
Wow nice congrats
|
Do you have info on the swap over to the f23 in one of your prior threads? To lazy to search through them right now.
|
Originally Posted by ECaulk
(Post 7604371)
Do you have info on the swap over to the f23 in one of your prior threads? To lazy to search through them right now.
You'll need the front F23 trans mount, axles, shifter, cables, and shifter console/cup holder. Requires you machine some martial off on the housing where it makes contact with the thermostat housing. |
nice work, i bet it sounds/feels awesome
|
Originally Posted by Slowbalt2000
(Post 7604379)
nice work, i bet it sounds/feels awesome
|
Bad ass man, gratz on these epic numbers
|
to effin sic good stuff man congrats
|
Awesome dude! Super happy for ya. Saw the vid yesterday and hooly shit buddy!
Minus the block of course it doesnt even seem like all too crazy of a build! Shows what you can really do without a 3 inch catback and all the cooling mods. Would it have yielded lower #s on a 3rd or 4th gear pull? Anyway as one of the few to get 'close' to 400whp (380 here) all i can say is congrats! |
Originally Posted by riceburner
(Post 7604457)
Awesome dude! Super happy for ya. Saw the vid yesterday and hooly shit buddy!
Minus the block of course it doesnt even seem like all too crazy of a build! Shows what you can really do without a 3 inch catback and all the cooling mods. Would it have yielded lower #s on a 3rd or 4th gear pull? Anyway as one of the few to get 'close' to 400whp (380 here) all i can say is congrats! The griffin holds so much water from 3000-8000 it only rises 15-20*; then it starts climbing quickly after that. Hits about 136-140 by 9000+. Not bad for a stock endplate |
Only 294 torque? Should of just gotten an LNF.
|
Originally Posted by Sl0wbaltSS
(Post 7604460)
Only 294 torque? Should of just gotten an LNF.
You're funny |
Originally Posted by Sl0wbaltSS
(Post 7604460)
Only 294 torque? Should of just gotten an LNF.
Look at the torque curve.... its flat all the way through the pull. Doesn't peak and drop like most turbo cars. Go troll somewhere else..... |
Said it many times, but I'll say it again....
Nice job Steve & Trevor! |
Originally Posted by Staged07SS
(Post 7604479)
You're a moron.
Look at the torque curve.... its flat all the way through the pull. Doesn't peak and drop like most turbo cars. Go troll somewhere else..... |
Originally Posted by ECaulk
(Post 7604482)
I dont think he understands what a torque curve is, he just looks at peak numbers and talks about his daddy's super fast scion :lol:
|
1 Attachment(s)
Look who the real trolls are :rolleyes: having a fat peak number is awesome and it is funny to have all that power and still not too high over stage 2 #s torque, that really is a nice graph. And who needs torque when youre pinning...
|
Id just love to keep it in 3rd gear and let the eaton eat!
|
Originally Posted by riceburner
(Post 7604489)
Look who the real trolls are :rolleyes: having a fat peak number is awesome and it is funny to have all that power and still not too high over stage 2 #s torque, that really is a nice graph. And who needs torque when youre pinning...
All the kiddies that just look at peak numbers miss what's really going on. VW's are making your brain shrink. Ha. |
Stage re read me bruh, I agree with you that its not all about the peak! Also agree that the curve for this car is great.
I managed 272ftlbs on 300whp and 282ftlbs at 380 lol, just found it funny is all. |
Originally Posted by riceburner
(Post 7604496)
Stage re read me bruh, I agree with you that its not all about the peak! Also agree that the curve for this car is great.
I managed 272ftlbs on 300whp and 282ftlbs at 380 lol, just found it funny is all. |
Wow great numbers and sounds amazing
|
All times are GMT -4. The time now is 08:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands