My B4B car show/dyno day adventure!
 

We had a big crew go down to MN this year for the boost for boobies car show/dyno day breast cancer awareness fundraiser. It was a blast with 25+ people from my area making the trip and 5 of us running on the dyno. I decided to get a spot and dyno the car even though it is on lower boost and can't take it to 8k since the maf is completely maxed and the car doesn't play nice and leans out above that. I have my mini AFC here now so that will be addressed this week :)

I got the last spot for the day, so there wasn't a huge crowd, but next time I'll get some prime time. Here she is waiting for a 430whp Evo to come off the dyno.

Attachment 23380

Then it was my turn. They pulled the car on and tried a 3rd gear pull and it spun on the rollers, and got everyones attention. More people walked towards the door to watch as the dyno operator asked if he could do a 4th gear pull. I said sure and he let it eat on just 23lbs to 7300 rpms where she started to lean out as I told him it would. I could see he was glancing between the wideband and the speedo as his eyes grew wider. He let off and looked over at the guy running the computer and yelled out a loud "HOLY FUCK" :lol: The guy running the computer then looked at it and turned to me and said "5 0 1", and I yelled to everyone outside that it made 501whp and heard a loud cheer. On just 23 psi and 7300 I was happy, and it looked as if it would make another 15-20whp when I can take it to 8k. I then tried another run on 25 psi and advised him to let off around 6500 before it ran out of fuel. I just wanted to see what kind of gains to expect, and it looks as if it will make about 30whp more on 25. Did another pull on around 24 just because I had a pull left. The guys working there all gave me props and one even said "you just blew my mind" lol, and they all said they were surprised and that the car must be a riot on the street. I told them next time I'll have the fueling side of things covered and will be aiming for near 600. BS'd for a few minutes as they backed the car out, and as I walked out to the car this happened :D

Attachment 23381

People flocked and shook my hand and congratulated me and showed a lot of respect and were just really kind and made it a fun time! Some guys invited me to the local street races that night, but it ended up raining so they called it off.

It was a fun trip and I got to meet some cool guys from the forums and that made it even cooler. Thanks to everyone for coming out and supporting the good cause that the event goes for! The guys at MAP were very appreciative and Chris Carey the owner, and Dan (who started the event) both shook all of our hands and thanked us for coming out for the 3rd year. I'm excited to see how much money they raised for donation.

Here is my graph. They said it was the smoothest one they had seen all day.

Attachment 23382

My car on the dyno.

Attachment 23383

The friends' cars I tuned made the following:

2007 STi, built motor, 6262, stock heads and stock cams on E85 30psi made 504whp (488 on 26, needs headwork!)

2008 Speed3, bolt ons, FMIC, on 21 lbs 91 made 298whp/310tq

2011 STi, turboback, injectors and E85 on 22psi made 335whp/385tq

2003 G35, 6262 on 8lbs 91 made 375whp

Big thanks to all the support from everyone on here! I'm not even going to begin to name off people because there are far too many who have influenced this car over the years. It has been a journey, but I enjoy spending my spare time working on this thing, even when it pisses me off, because moments like Saturday make it all worth it. That's what its all about! :)

I'll post videos as soon as I receive them from friends. Thanks for reading!

One vid taken by REDLINE1313. The whole dyno session! at 1:30 is where I yell the numbers to the crowd.

yesssss ecotec respect! awesome number dude

Congats man. This thing is just ready to be unleashed!

awesome numbers man! thing is gotta be a freaking blast to drive!

:twothumbs

In for the videos.

Awesome job!! Especially on low boost....you cant even call high boost kill mode...its gonna obliterate lol. Cant want to see it higher. Congrads on making it the 500 wheel club. :twothumbs:twothumbs

Very nice! Now moar boost!

great work!

That is a badass graph congrats
That pictue of everyone standing around you car should be framed its awesomeness

Thanks guys, it was a ton of fun! I added a video that REDLINE1313 from RLF took of the whole dyno session of mine.

Congrats Taylor! Can't wait to see what this thing will do when it's trnt up haha. Welcome to the 500 club!

Very impressive, Sir! Really really wished I coulda made it. First time in 4 years I couldnt make it

That soundtrack tho....fap fap

good god that is a smooth power curve. This makes me contemplate taking the balt further. very impressive man.

It was a great time and it was cool to meet Taylor and all the guys from ND.
Big Congrats on 501hp! This car is nasty, hopefully next time I get to ride in it it'll be 100% and 600+.

Thanks guys, it was such a blast! Just wish it wouldn't have rained that night so we could have gone to the street races.

Alex, next time you can actually get more than 1 second of super lean WOT action followed by a bunch of swearing :lol: That was frustrating. I think the pump or regulator just got upset on the long drive down...I don't really have any other explanation lol. I'm just glad it ended up working right on Saturday.

Very nice!!

Awesome stuff. Have always loved your car

Thanks guys! I'm excited to turn it up a little. I'll probably daily it on around 22-23 lbs, but need to unleash party mode once in a while :lol:

beast mode

Bring it to CED or maybe ill make a trip your way once mines done so you can work your magic.

Ive made the 6 hour trip more than once to get tuned by Infra. The guy is good. Even just watching him tune others while I was done there was great to see.

Not to mention the amounts of alcohol consumed while visiting ahah

Ya definitely not just a business trip lol :twothumbs

Please tell me this is included in party mode!!