Thinking about getting ZZP adjustable tensioner
02-06-2010, 04:54 PM
#1
New Member
Thread Starter
Join Date: 12-10-07
Location: Minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Thinking about getting ZZP adjustable tensioner
When i took off my stock belt i didnt notice this till i was putting the stage 2 belt on. The tensioner would wabble from side to side and the bolts were all tight. So, I have been wondering if i should do anything about that because i dont want and belt slip or dont want the belt chewed up in so many miles. I have the ottp stage 2 kit on mine with the 2.8" pulley. So, I was wondering if i should get this ZZP thing, but when i look at the picture of it, it doesnt come with a pulley so what do you do? And it doesnt come with that rubber cylinder that you have to compress. SO if you guys could help me out on this that would be great!!
02-06-2010, 05:01 PM
#2
Senior Member
Join Date: 05-26-09
Location: Cali
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
I have one for sale man..'
ANd basically it bolts to the tensioner u already have. but u take the pulley off the stock one and put it on the zzp. also u adjust it by turning a reverse threaded bolt.
ANd basically it bolts to the tensioner u already have. but u take the pulley off the stock one and put it on the zzp. also u adjust it by turning a reverse threaded bolt.
02-06-2010, 05:10 PM
#4
Senior Member
Join Date: 05-26-09
Location: Cali
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
Nah its brand new just git.. has the instructions, waasher, bolt.. everything it came with i just open it to read and look and figured i didnt need it cause i am running a 2,9 on stage 2 with no belt slip.. Works with 2.8 and down i was told.. But i will give it to ya for 80 shipped if ya want it.
02-06-2010, 05:15 PM
#5
New Member
Thread Starter
Join Date: 12-10-07
Location: Minnesota
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Thats a amazing price for that... The car hasnt been started beacuse i am doing more stuff to it so i dont know if the belt actually slips.. I would like to have it for that price but i dont want to spend money for something that i actually dont need if you know what i mean. Not trying to be mean or anything.
If you dont mind me asking what else would you recommend me getting for my balt? Mounts? or what? Im just trying to get an idea of what i should get next.
If you dont mind me asking what else would you recommend me getting for my balt? Mounts? or what? Im just trying to get an idea of what i should get next.
02-06-2010, 07:10 PM
#8
Senior Member
Join Date: 09-25-05
Location: STL
Posts: 3,458
Likes: 0
Received 0 Likes
on
0 Posts
hehe, I sold my balt almost a year ago. If he falls through in cali, I got the same brand new tensioner. never put it on cause my 2.9 diddnt slip....weird I know. When I bought it back in 06 they diddnt come with instructions. But thers a thread on here that explains the settings. just saying if you need more options
02-06-2010, 07:21 PM
#9
Senior Member
Join Date: 05-26-09
Location: Cali
Posts: 1,057
Likes: 0
Received 0 Likes
on
0 Posts
HAHA see..
And u should get a custom tune,, ottp is ok but custom is always better
and a dual pass with option B, And some supension mods like ottp roted trans mounts, ottp sway bar, new clutch, meth in the future. drilled slotted rotors with hawk pads
And u should get a custom tune,, ottp is ok but custom is always better
and a dual pass with option B, And some supension mods like ottp roted trans mounts, ottp sway bar, new clutch, meth in the future. drilled slotted rotors with hawk pads
Thread
Thread Starter
Forum
Replies
Last Post