Mark this thread as Unsold
For Sale 2.2/2.4 Partial Turbo Kit
2.2/2.4 Partial Turbo Kit
Sold Sold Sold
Sold Sold Sold
Sold Sold Sold
I’ve decided to stop moding the car and start saving for a WRX so... up for sale is a partial turbo kit for 2.2/2.4 $500.00 + Shipping (Lower 48 States ONLY NO military addresses)
It can be used with the stock downpipe and exhaust but it is highly recommended to upgrade to higher flowing exhaust parts!
It Includes
Garrett T25/T28 turbo manifold (Used)
CX Racing TB28 Turbocharger (NEW)
60lb injectors (NEW)
2.2/2.4 harness for 60lb injectors (Made Myself)
Treadstone Performance Cold Air Intake (New)
Specter Filter (NEW)
Treadstone Performance Bypass Tee (New)
Bosch Bypass Valve (Used)
V-Band Oxygen Housing (Made Myself)
Turbo Gaskets (New)
-4AN Turbo Oil Inlet Fitting (New)
-8AN Turbo Oil Drain Fitting (New)
2 T-Bolt Clamps (New)
Crank Case Vent Breather (Used)
RTV Ultra Black 82180 (Unopened)
10 PSI Internal Waste gate Actuator (New)
15 PSI Internal Waste gate Actuator (New)
-8AN Oil Pan Tap (New)
Turbo Specs
- 2.5" Air Inlet
- 2" Air Outlet
- Wet Floating Bearings
- Oil and Water Cooled
- Standard T25/T28 Flange to Manifold
- .42 A/R Compressor
- .86A/R Turbine
- 60mm/42mm Compressor Wheel
- 53mm/46mm Turbine Wheel
- 2.5" V-band Flange
You will need the Oil and Coolent Lines, Intercooler + Piping, and a Tune to finish the kit
If you use 2" intercooler piping I have some 2" cupler streights, cupler 90s, and cupler 45s, I am willing to throw in free of charge along with more 2" T-Bolt clamps
Sold Sold Sold
Sold Sold Sold
I’ve decided to stop moding the car and start saving for a WRX so... up for sale is a partial turbo kit for 2.2/2.4 $500.00 + Shipping (Lower 48 States ONLY NO military addresses)
It can be used with the stock downpipe and exhaust but it is highly recommended to upgrade to higher flowing exhaust parts!
It Includes
Garrett T25/T28 turbo manifold (Used)
CX Racing TB28 Turbocharger (NEW)
60lb injectors (NEW)
2.2/2.4 harness for 60lb injectors (Made Myself)
Treadstone Performance Cold Air Intake (New)
Specter Filter (NEW)
Treadstone Performance Bypass Tee (New)
Bosch Bypass Valve (Used)
V-Band Oxygen Housing (Made Myself)
Turbo Gaskets (New)
-4AN Turbo Oil Inlet Fitting (New)
-8AN Turbo Oil Drain Fitting (New)
2 T-Bolt Clamps (New)
Crank Case Vent Breather (Used)
RTV Ultra Black 82180 (Unopened)
10 PSI Internal Waste gate Actuator (New)
15 PSI Internal Waste gate Actuator (New)
-8AN Oil Pan Tap (New)
Turbo Specs
- 2.5" Air Inlet
- 2" Air Outlet
- Wet Floating Bearings
- Oil and Water Cooled
- Standard T25/T28 Flange to Manifold
- .42 A/R Compressor
- .86A/R Turbine
- 60mm/42mm Compressor Wheel
- 53mm/46mm Turbine Wheel
- 2.5" V-band Flange
You will need the Oil and Coolent Lines, Intercooler + Piping, and a Tune to finish the kit
If you use 2" intercooler piping I have some 2" cupler streights, cupler 90s, and cupler 45s, I am willing to throw in free of charge along with more 2" T-Bolt clamps
Last edited by Axelthered05; Mar 31, 2011 at 10:51 AM. Reason: [B]Sold Sold Sold[/B]
![[10]'s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23cb8fc0' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>[</text></svg>)
