Cobalt SS Network

Cobalt SS Network (https://www.cobaltss.net/forums/)
-   Parts (https://www.cobaltss.net/forums/parts-66/)
-   -   brand new (https://www.cobaltss.net/forums/parts-66/brand-new-43054/)

biohazard 01-09-2007 04:16 PM

brand new
 
brand new C/A harness bar for sale, got it for xmas and decided not to use it because i went a diff,more expensive,:thumbsdow route and cant/ dont have use for it anymore. I do not want to pay a restocking fee so seeing if somone wants it.

I also have 2 WeaponR 4 pt harnesses for sale.... they are black and were in the car for a week:twothumbs

harness bar looks just like the ones on www.cobalt-addiction.com under roll cages
belts are the weaponR 4 pts on there

HARNESS BAR= $250 shipped (normally $259.99+39.99)

WeaponR 4 points = $95 shipped (normally $99.99 + 14.99)

$325 for all of it


prices are shipped to the US

biohazard 01-09-2007 09:51 PM

32 views and no comments? lol i suck

victory_red_SS 01-09-2007 09:55 PM


Originally Posted by biohazard (Post 736491)
32 views and no comments? lol i suck

That would sound a whole lot better, cumming from one of our female members.;)

firestorm 01-09-2007 10:03 PM

you pig, lol

biohazard 01-09-2007 10:38 PM


Originally Posted by victory_red_SS (Post 736504)
That would sound a whole lot better, cumming from one of our female members.;)

sounded pretty good comming from your girlfriend last night:lock:

lol jk man my classified add is whoring up aleready?:thumbsdow

Halfcent 01-10-2007 12:00 AM

Tell us a couple things about it.

First, it attaches to the stock upper seat belt points. Now besides for the bolts themselves being very tight to remove, do you completely retain the use of the stock belts after the bar is installed, or are they no longer useable?

Second, how about the floor mounting point? What exactly does it attach to? Do you need to have a plate welded into the floor for it?

biohazard 01-10-2007 08:34 PM


Originally Posted by Halfcent (Post 736825)
Tell us a couple things about it.

First, it attaches to the stock upper seat belt points. Now besides for the bolts themselves being very tight to remove, do you completely retain the use of the stock belts after the bar is installed, or are they no longer useable?

Second, how about the floor mounting point? What exactly does it attach to? Do you need to have a plate welded into the floor for it?

the boplts shouldnt be too har dot remove... my one from factory came out with a ratchet and some elbo grease... the other was hard cuz i had my seatbelt replaced at the dealerbefore and they overtightened it and used like jb weld to hold it in(not loctite like normal)

I believe you can still use the stock seatbelts if u use this, this would just go behind it kinda if that makes sence...you would have to ask donna on that one but im about 90% sure u can

The brace is supposed to just be drilled through the hump... i know its not rlly thick there so u could probably weld a plate for reihnforcement but it wil most likly be fine.... you get a bracket you drill throught the hump and mount, then bolt the support to the bracket:twothumbs

06noscobaltss 01-10-2007 08:57 PM

$150 shipped? let me know

biohazard 01-10-2007 08:59 PM


Originally Posted by 06noscobaltss (Post 739004)
$150 shipped? let me know

belts or bar?

06noscobaltss 01-10-2007 09:00 PM


Originally Posted by biohazard (Post 739010)
belts or bar?

bar. or both ;)

biohazard 01-10-2007 09:01 PM

if that offer was for the bar then no cuz i can get 200 from returning it

biohazard 01-10-2007 09:01 PM

hang on ill set some prices just a sec

sunfirejoe 01-10-2007 09:04 PM

i can offer you 250 for both ;)

biohazard 01-10-2007 09:12 PM


Originally Posted by sunfirejoe (Post 739026)
i can offer you 250 for both ;)

250 for bar...... for both ill do $325... this stuff is brand new the bar was never even test fitted or brought withing 20 ft of my car, belts were only in for a week until my new ones came

biohazard 01-10-2007 09:13 PM

sht just saw that u were in canada... shiping to there cost alot(i just did it a few days ago) if u buy from canada i have to change some stuff around

06noscobaltss 01-10-2007 09:15 PM

ok then well let me know if no one wants it. Ill offer 175 shipped maybe i can swing 200 for the bar but money is tight from the build I am doing.

06noscobaltss 01-10-2007 09:16 PM

Actually Ill give you $175 and Ill meet up with you! I live in Naperville! and you go to UTI if im mistaken. so I know a couple people that go there!

biohazard 01-10-2007 09:20 PM


Originally Posted by 06noscobaltss (Post 739071)
Actually Ill give you $175 and Ill meet up with you! I live in Naperville! and you go to UTI if im mistaken. so I know a couple people that go there!

meeting up would be the way to go but i cant do 175... i can get 200 something if i return it and pay restocking fee...... if we meet up ill do 220 cash

biohazard 01-10-2007 09:21 PM

220 is alot better than the $300ish off c/a

06noscobaltss 01-10-2007 09:26 PM

sorry i cant swing that much at this time. already gotta get ready to pay off the 9k in parts that are on the credit cards. thanks though and good luck with the sale

biohazard 01-12-2007 11:31 PM

bump.... i rlly need to sell or i will mail back soon

biohazard 01-14-2007 11:05 AM

desperate bump PM ME AN OFFER

TurboBlackBalt 01-14-2007 11:24 AM

Pm Sent


All times are GMT -4. The time now is 10:02 AM.


© 2024 MH Sub I, LLC dba Internet Brands